irc/inspircd: Update to 3.13.0

Changes:	https://docs.inspircd.org/3/change-log/#inspircd-3130

security/mbedtls: Update to 2.28.0 and fix make test

Also bump dependent ports for library version change.

PR:		255084

irc/inspircd: Update to 3.12.0

Changes:		https://docs.inspircd.org/3/change-log/#inspircd-3120
Approved by:		0mp (mentor)
Differential Revision:	https://reviews.freebsd.org/D33736

*/*: Consistently use my new driesm@FreeBSD.org alias

Replace all occurences of driesm.michiels@gmail.com with
driesm@FreeBSD.org.

Approved by:		philip (mentor), 0mp (mentor)
Differential Revision:	https://reviews.freebsd.org/D32896

irc/inspircd: Fix CPE information because current one is deprecated

Approved by:    portmgr (blanket)

irc/inspircd: Update to 3.11.0

Changelog:
	https://docs.inspircd.org/3/change-log/#inspircd-3110

PR:		258116

irc/inspircd: Update to 3.10.0

Changes: https://docs.inspircd.org/3/change-log/#inspircd-3100

PR:	255932

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

irc/inspircd: Update to 3.9.0 and pass maintainership to submitter

Changes: https://docs.inspircd.org/3/change-log/#inspircd-390

PR:		253878
Submitted by:	Dries Michiels <driesm.michiels AT gmail DOT com>

irc/inspircd: Update to version 3.8.1

- Apply suggestions from portclippy/portfmt/portlint
- Remove multiple no-op REINPLACE_CMD

https://docs.inspircd.org/3/change-log/#inspircd-381

PR:		252291
Reported by:	Sadie Powell <sadie@witchery.services>

irc/inspircd: Update to 3.7.0, drop maintainership

Changes:	https://docs.inspircd.org/3/change-log/#inspircd-370

irc/inspircd: Update to 3.6.0

Changes:	https://docs.inspircd.org/3/change-log/#inspircd-360
Reported by:	Tyler Saylor <me@tylersaylor.com>

irc/inspircd: Update to 3.5.0

Changes:	https://docs.inspircd.org/3/change-log/#inspircd-350

irc/inspircd: Update to 3.4.0

Changes:	https://docs.inspircd.org/3/change-log/#inspircd-340

Approved by:	tz (mentor)
Differential Revision:	https://reviews.freebsd.org/D22159

Change my maintainer email

Approved by:	tz (mentor), portmgr (adamw)
Differential Revision:	https://reviews.freebsd.org/D21677

irc/inspircd: Update to 3.3.0 (bugfix release); Add MBEDTLS knob

PR:		240129
Submitted by:	Dmitri Goutnik <dg@syrec.org>
MFH:		2019Q3

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

irc/inspircd: fix build on GCC architectures

Base GCC can't build this port:
/usr/include/c++/4.2/tr1/functional:907: error: cannot use typeid with -fno-rtti

Approved by:	mentors (implicit approval)

irc/inspircd: update to 3.2.0

PR:		239017
Submitted by:	Dmitri Goutnik <dg@syrec.org> (maintainer)

Update to 3.1.0

- Switch to DISTVERSION
- Remove obsolete configure options

Changelog: https://docs.inspircd.org/3/change-log/#inspircd-310

PR:		237964
Submitted by:	Dmitri Goutnik <dg@syrec.org> (maintainer)
Sponsored by:	Netzkommune GmbH

irc/inspircd: Update to 3.0.1

PR:		237831
Submitted by:	Dmitri Goutnik <dg@syrec.org> (maintainer)

irc/inspircd: Spell GNUTLS_CONFIGURE_ENABLE correctly

irc/inspircd: update to 2.0.27

PR:		235083
Submitted by:	Dmitri Goutnik <dg@syrec.org> (maintainer)

Remove GeoIP-related options. Where possible, replace GeoIP 1 defaults
with GeoIP 2.

Also, as suggested by zi, add an UPDATING note about this.

irc/inspircd: Update to 2.0.26

PR:		227705
Submitted by:	Dmitri Goutnik <dg@syrec.org> (maintainer)

irc/inspircd: Modernize port (adding files/pkg-deinstall.in)

Addition to r456675: the new file files/pkg-deinstall.in has
been approved, but hasn't been added in r456675.

PR:		224041
Submitted by:	Dmitri Goutnik <dg@syrec.org> (maintainer)
Approved by:	adamw (mentor)
Differential Revision:	https://reviews.freebsd.org/D13345

irc/inspircd: Modernize port

PR:		224041
Submitted by:	Dmitri Goutnik <dg@syrec.org> (maintainer)
Approved by:	adamw (mentor)
Differential Revision:	https://reviews.freebsd.org/D13345

irc/inspircd: Update MAINTAINER

PR:		220268

irc/inspircd: Update to 2.0.25

Changelog:	http://www.inspircd.org/2017/11/12/v2025-released.html

PR:		220268
Differential Revision:	https://reviews.freebsd.org/D12990

irc/inspircd: move USES=pkgconfig to SSL option

This is how it was in previous versions.

irc/inspircd: USES+=pkgconfig required for ports SSL configuration

The configure script can use pkgconfig so make sure it's available.

Approved by:	just-fix-it

irc/inspircd: Update to 2.0.23

This update also resolves an authentication bypass vulnerability.

Reported by:	<dijit sh drk sc>
MFH:		2016Q3

Simplify plist by using @sample

Approved by:	feld (maintainer)

Consistently prefer ${CONFIGURE_CMD} over ./${CONFIGURE_SCRIPT}

This also fixes SET_LATE_CONFIGURE_ARGS with custom CONFIGURE_CMD.

PR:		208294
Exp-run by:	antoine
Approved by:	portmgr (antoine), perl (mat)
Differential Revision:	https://reviews.freebsd.org/D4158

Remove ${PORTSDIR}/ from dependencies, categories h, i, j, k, and l.

With hat:	portmgr
Sponsored by:	Absolight

- Update security/gnutls to 3.4.10.
- Rename the LIBDANE option DANE because that's the name of the protocol
  supported by libgnutls-dane and gnutls-cli.  Also clarify the option
  description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4.  Some ports used this library
  in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed.  Ports that used these have been
  updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.

net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.

www/hydra: Mark BROKEN.  This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.

PR:		207768
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Convert g* and i* to USES=sqlite and USES=firebird

irc/inspircd: Update to 2.0.20

Fix default config file path to sample configs and add rc script chdir
so these relative paths work. This makes it easier to get a new install
up and running.

MFH:		2015Q4
Security:	b808c3a8-ae30-11e5-b864-14dae9d210b8

Update ports in the [i-m]* category to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight

Add "reload" command to rc script
Pass rclint

gnutls module doesn't need libgcrypt (from gpg...)

security/libgcrypt: 1.6.1 -> 1.6.2, bump depends

Changes:
- src/sexp.c (do_vsexp_sscan): Return error for invalid args.
- cipher/md.c (_gcry_md_info): Fix a segv in case of calling
  with wrong parameters.
- cipher/primegen.c (_gcry_generate_elg_prime): Change to return an
  error code, possible NULL deref in call to prime generator.
- cipher/dsa.c (generate): Take care of new return code.
- cipher/elgamal.c (generate): Change to return an error code.  Take
	care of _gcry_generate_elg_prime return code.
- ecc: Support the non-standard 0x40 compression flag for EdDSA.
- mpi: Extend the internal mpi_get_buffer.
- mpi: Fix regression for powerpc-apple-darwin detection.
- Fix bug inhibiting the use of the sentinel attribute in src/gcrypt.h.in

Update to 2.0.18

Finally retire USE_PGSQL

Add CPE capability
Remove unnecessary @dirrm

Update to 2.0.17

Properly configure default data and log directories.

Enable OPENSSL as default open -- crypto should be possible
out of the box.

Alter rc script startup ordering.

In the event the user is running Inspircd with a MySQL or Postgres
backend it will fail to start on boot if it comes up before the database
does.

PR:		191187

Bump PORTREVISION on more ports that depend on libgcrypt after the update
in r363436 and remove the UPDATING entry because it did not guarantee
that all ports were updated nor that they were updated in the right order.
Also remove libgcrypt.la again.

PR:		192342
Approved by:	portmgr (implicit, bump unstaged ports)

net/openldap24-*:
- Convert to USES=libtool and bump dependent ports
- Avoid USE_AUTOTOOLS
- Don't use PTHREAD_LIBS
- Use MAKE_CMD

databases/glom:
- Drop :keepla
- Add INSTALL_TARGET=install-strip

databases/libgda4* databases/libgda5*:
- Convert to USES=libtool and bump dependent ports
- USES=tar:xz
- Use INSTALL_TARGET=install-strip
- Use @sample

Bump PORTREVISION on all ports with USE_SQLITE=yes or USE_SQLITE=3 that
have not been bumped yet after the latest libsqlite3.so library version
change.

Approved by:	portmgr (implicit)

Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. Categories G-I.

CR:		D201
Approved by:	portmgr (bapt)

Change rc script to daemonize inspircd via daemon(8)

inspircd has a curious feature where it exits with signal 15 when it
forks off to the background. This is very confusing and leads users to
believe the service was not started successfully when in fact it was.

https://github.com/inspircd/inspircd/pull/626

Approved by:	swills (mentor)

Fix creation of directories in rc script

Submitted by:	gizd
Approved by:	crees (mentor)
MFH:		2014Q1

Fix SQLITE and GNUTLS build options which were missing pkgconfig

PR:		ports/185610
Approved by:	swills (mentor)

Last log entry was incomplete:

- Update to 2.0.14
- Support STAGE

Approved by:	swills (mentor)

STAGE support

Approved by:	swills (mentor)

Add NO_STAGE all over the place in preparation for the staging support (cat:
irc)

- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Approved by:	portmgr (bapt@, blanket)

Fix my email address again, using proper @FreeBSD.org styling

Approved by:	swills (mentor)

Update my email address throughout the tree

Approved by:	swills (mentor)

- Update to 2.0.12
- rc script passes rclint
- Add UPDATING entry

PR:		ports/179015
Submitted by:	Mark Felder <feld@feld.me> (maintainer)

Chase security/libgcrypt update

- Correct the distinfo after we switched to github

Pointy hat to:	miwi

- Correct the Created by line with the Real name

- Switch to USE_GITHUB
- While here trim header

- Update to 2.0.10

PR:		ports/175808
Submitted by:	Mark Felder <feld@feld.me> (maintainer)

- Add UPDATING entry for gnutls update
- Chase shlib version bump for dependant ports

Update PCRE to 8.32
Introduces the UTF-32 library pcre32
Bump PORTREVISION in dependent ports

- Remove empty file that should have been removed in r307872

Pointed out by:	eadler
Pointyhat to:	swills
Feature safe:	yes

- Update to 2.0.9

PR:		ports/173959
Submitted by:	Mark Felder <feld@feld.me> (maintainer)
Feature safe:	yes

- Update to 2.0.8
- Made the knobs actually work
- Added regex modules as new knobs
- Added ldapoper module knob

PR:		ports/170644
Submitted by:	Mark Felder <feld@feld.me> (maintainer)

- use USERS/GROUPS framework
- remove pkg-deinstall and move cleanup instructions into pkg-plist
- pet portlint on pkg-plist for mode and group warnings

PR:     ports/168821
Submitted by:   jgh@
Approved by:    maintainer, feld@feld.me

- Converted to optionsng
- Standardized on SQLITE and LDAP knob names
- Added proper PORTDOCS

PR:             ports/168722
Submitted by:   Mark Felder <feld@feld.me> (maintainer)

- revert unintented change to plist

PR:     ports/167975
Approved by: maintainer, implicit

- Update inspircd to 2.0.5 [1]
- document CVE-2012-1836 [2]

PR:     ports/167975
Submitted by:   maintainer, feld@feld.me [1], jgh@ [2]
Security:       CVE-2012-1836

- maintainership over to feld@feld.me from ports@freebsd.org

Approved by:    mail query, feld@feld.me

- Add INSPIRCD_LOG and INSPIRCD_RUN substitution patterns for
  etc/rc.d/inspircd file to fix service starting
- WITH_GNUTLS option needs security/libgcrypt to work

PR:             ports/164352
Submitted by:   Geoff Garside <freebsd@geoffgarside.co.uk>

In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().

In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.

- Reset maintainership (5 simultaneous timeouts since Sep/2009)
- Use USE_OPENSSL

PR:             ports/158695
Submitted by:   crees
Approved by:    rene (mentor, implicit)

Oops, ${PORTSDIR}/Mk isn't in the search path of course...

Submitted by:   rene
Approved by:    rene (mentor, implicit)

Use USERS and GROUPS

PR:             ports/157612
Submitted by:   crees (me)
Approved by:    rene (mentor, implicit), maintainer timeout

Chase security/gnutls update and add an UPDATING entry.

- Update to 2.0.2

PR:             154998
Submitted by:   Ayumi Mitsui <ayu@commun.jp>
Approved by:    maintainer timeout

- MAKE_JOBS_UNSAFE (DISABLE_* is end-user setable)

- Fix build of gnutls module

PR:             ports/144989
Submitted by:   Austin Teague <opticshade@gmail.com>
Approved by:    maintainer timeout (2 months)

- Update to 1.1.20

PR:             138155
Submitted by:   Sylvio Cesar <scjamorim@bsd.com.br>
Approved by:    maintainer timeout

Bump PORTREVISIONs of the gnutls dependant ports to chase gnutls update.

Fix a few "bad example" problems in the rc.d scripts that have been
propogated by copy and paste.

1. Primarily the "empty variable" default assignment, which is mostly
${name}_flags="", but fix a few others as well.
2. Where they are not already documented, add the existence of the _flags
(or other deleted empties) option to the comments, and in some cases add
comments from scratch.
3. Replace things that look like:
prefix=%%PREFIX%%
command=${prefix}/sbin/foo
to just use %%PREFIX%%. In many cases the $prefix variable is only used
once, and in some cases it is not used at all.
4. In a few cases remove ${name}_flags from command_args
5. Remove a long-stale comment about putting the port's rc.d script in
/etc/rc.d (which is no longer necessary).

No PORTREVISION bumps because all of these changes are noops.

- Update to version 1.1.19
- Add OPTIONS dialogue to enable extra modules
- Add rc.subr start-up script
- Add the usual boilerplate so that inspircd will run as user ircd
  from /usr/ports/UIDs
- Fix compilation so it works with the base system version of the
  openssl libs as well as openssl installed from ports.

PR:             ports/123076
Submitted by:   Matthew Seaman <matthew.seaman@thebunker.net>
Approved by:    Craig Edwards (Brain) <brain@inspircd.org> (maintainer)

Force commit for notes

PR:             ports/113680
Approved by:    maintainer, garga (mentor)

- respect CXXFLAGS
- cosmetic change in Makefile

Approved by:    garga (mentor)

- bugfix: example files install and their pkg-plist entries
- added USE_LDCONFIG entry

PR:             ports/113502
Submitted by:   Craig Edwards <brain@inspircd.org> (maintainer)
Pointyhat to:   sat
Approved by:    maintainer, garga (mentor)

- Fix a nasty bug where PREFIX/bin could get chmod'ed to 700

Reported by:    pointyhat via kris
Submitted by:   Craig Edwards <brain@inspircd.org> (maintainer, based on)
Pointy hat to:  sat

Fix a typo

Approved by:    sat (mentor)

- Update to 1.1.8
- Remove 4.x cruft

PR:             ports/113501
Submitted by:   Craig Edwards <brain@inspircd.org>
Approved By:    sat (mentor)

- Mark BROKEN on FreeBSD 4

InspIRCd is a highly modular C++ IRC daemon. It supports most features
of other IRC daemons, and supports FreeBSD kqueue() for connection
management.

WWW: http://www.inspircd.org/

PR:             ports/102583
Submitted by:   Craig Edwards <brain@mail1.chatspike.net>