12:59 Muhammad Moinur Rahman (bofh) 

graphics/zbar: Moved man to share/man

Approved by:    portmgr (blanket)

    ddb98ac

18:14 Nuno Teixeira (eduardo) 

*/*: Bump consumers of x11-toolkits/gtk30

New version of gtk3 in tree

    3572ca3

17:13 Daniel Engberg (diizzy) 

*/*: Bump jpeg-turbo users treewide

New major version 3.0.0

    664a2fa

11:10 Felix Palmen (zirias) 

Mk/Uses/magick.mk: Bump all consumers

Bump all consumers of ImageMagick ports after flavorizing them.

Approved by:	tcberner (mentor, implicit)

    a6bb2f8

09:00 Fernando Apesteguía (fernape)  Author: Andrew

graphics/zbar: fix to allow building without NLS

PR:		269962
Reported by:	andrew.fengler@scaleengine.com
Approved by:	dev2@heesakkers.info (maintainer)

    025aafa

10:20 Felix Palmen (zirias) 

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

    ddae4e9

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:22 Tobias C. Berner (tcberner) 

graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>
  *  Alexander Gromnitsky
  *  Alexander Kojevnikov <alexander@kojevnikov.com>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Nedotsukov <bland@FreeBSD.org>
  *  Alexander Nedotsukov <bland@mail.ru>
  *  Alexander Y. Grigoryev <alexander.4mail@gmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Anatoliy Dmytriyev <tolid@plab.ku.dk>
  *  Anatoly Borodin <anatoly.borodin@gmail.com>
  *  Anders Nordby <anders@fix.no>
  *  Andras Horvath <han@log69.com>
  *  Andreas Daehn <ad001@uni-rostock.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Slusar <anray@FreeBSD.org>
  *  Andrey Zakhvatov
  *  Anes Mukhametov <anes@anes.su>
  *  Anonymous <swell.k@gmail.com>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Arjan van Leeuwen <avleeuwen@piwebs.com>
  *  Ashish SHUKLA <ashish@FreeBSD.org>
  *  Bill Fumerola <billf@chc-chimes.com>
  *  Björn König <bkoenig@alpha-tierchen.de>
  *  Brad Hendrickse <bradh@iafrica.com>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Carlos Eduardo G. Carvalho <cartola@openit.com.br>
  *  Charlie Kester <corky1951@comcast.net>
  *  Choe, Cheng-Dae
  *  Choe, Cheng-Dae <whitekid@gmail.com>
  *  Chris D. Faulhaber <jedgar@FreeBSD.org>
  *  Chris D. Faulhaber <jedgar@fxp.org>
  *  Chris Piazza <cpiazza@FreeBSD.org>
  *  Christopher Key <cjk32@cam.ac.uk>
  *  Chuck Robey <chuckr@FreeBSD.org>
  *  Corey Smith <corsmith@gmail.com>
  *  Dan Langille <dvl@FreeBSD.org>
  *  Daniel O'Connor <darius@dons.net.au>
  *  Daniel Roethlisberger <daniel@roe.ch>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  Dave Cottlehuber <dch@skunkwerks.at>
  *  David Bremner <bremner@unb.ca>
  *  David Gilbert <dgilbert@velocet.ca>
  *  David Naylor <dbn@FreeBSD.org>
  *  David Yeske <dyeske@gmail.com>
  *  Denis Barov <dindin@dindin.ru>
  *  Denis Podolskiy <bytestore@yandex.ru>
  *  Dennis Herrmann <adox@mcx2.org>
  *  Devaux Fabien <fab@gcu.info>
  *  Dmitry Sivachenko <dima@Chg.RU>
  *  Dominik Brettnacher <domi@nonsensss.de>
  *  Donn Miller <dmmiller@cvzoom.net>
  *  Douglas Carmichael <dcarmich@mcs.com>
  *  Douglas K. Rand <rand@meridian-enviro.com>
  *  Edwin Groothuis <edwin@mavetju.org>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@critical.ch>
  *  Emil J.V. Björsell (Jev)
  *  Emmanuel Vadot <manu@FreeBSD.org>
  *  Eric Anholt <anholt@FreeBSD.org>
  *  Eric Freeman <freebsdports@chillibear.com>
  *  Eric P. Scott <eps+pbug0703@ana.com>
  *  Erwin Lansing <erwin@FreeBSD.org>
  *  Eugene Mychlo <myc@barev.net>
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Franz Klammer <klammer@webonaut.com>
  *  FreeBSD GNOME Team <gnome@FreeBSD.org>
  *  G. Adam Stanislav <adam@whizkidtech.net>
  *  Garrett Wollman <wollman@lcs.mit.edu>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Gerrit Beine (<gerrit.beine@gmx.de>)
  *  Gerrit Beine (<tux@pinguru.net>)
  *  Glenn Johnson
  *  Greg Lewis <glewis@FreeBSD.org>
  *  Gustau Perez <gustau.perez@gmail.com>
  *  Gustau Pérez i Querol <gustau.perez@gmail.com>
  *  Gvozdikov Veniamin <g.veniamin@googlemail.com>
  *  Hernan Di Pietro <hernan.di.pietro@gmail.com>
  *  Hiroto Kagotani <hiroto.kagotani@gmail.com>
  *  Horia Racoviceanu <horia@racoviceanu.com>
  *  Hye-Shik Chang <perky@fallin.lv>
  *  Hye-Shik Chang <perky@python.or.kr>
  *  Igor Pokrovsky <ip@doom.homeunix.org>
  *  Igor Pokrovsky <tiamat@comset.net>
  *  James FitzGibbon <jfitz@FreeBSD.org>
  *  Jamie Hermans <jamie@hermans.ca>
  *  Jan Henrik Sylvester <me@janh.de>
  *  Janni
  *  Janos Mohacsi <janos.mohacsi@bsd.hu>
  *  Jason Helfman <jgh@FreeBSD.org>
  *  Jean-Marc Zucconi <jmz@FreeBSD.org>
  *  Jean-Sébastien Pédron <dumbbell@FreeBSD.org>
  *  Jean-Yves Lefort <jylefort@FreeBSD.org>
  *  Jean-Yves Lefort <jylefort@brutele.be>
  *  Jeff Molofee
  *  Jeremy Norris <ishmael127@home.com>
  *  Jeremy Norris <ishmael27@home.com>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Johannes Dieterich <jmd@FreeBSD.org>
  *  Johannes Jost Meixner <johannes@perceivon.net>
  *  Johannes Meixner <johannes@perceivon.net>
  *  John Hay
  *  John McAree <john@mcaree.org>
  *  John Prather
  *  John Reynolds <johnjen@reynoldsnet.org>
  *  Joris Dedieu <joris.dedieu@gmail.com>
  *  Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>
  *  Jose Jachuf <jjachuf@gmail.com>
  *  Joseph Koshy <koshy@india.hp.com>
  *  Juergen Unger <j.unger@choin.net>
  *  KANOU Hiroki <kanou@mil.allnet.ne.jp>
  *  KIRIYAMA Kazuhiko
  *  Kay Lehmann
  *  Kevin Golding <ports@caomhin.org>
  *  Kimura Fuyuki <fuyuki@hadaly.org>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kris Kennaway <kris@FreeBSD.org>
  *  Kris Moore <kmoore@FreeBSD.org>
  *  Kubilay Kocak <koobs@FreeBSD.org>
  *  Kurt Kanzenbach <kurt@kmk-computers.de>
  *  Kyle Martin <mkm@ieee.org>
  *  Laurent Courty
  *  Leonardo Martins <lmartins@nepe.eee.ufg.br>
  *  Lev Serebryakov <lev@FreeBSD.org>
  *  Malte Lance <malte.lance@gmx.net>
  *  Marc Fonvieille <blackend@FreeBSD.org>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org> et al.
  *  Mark Atkinson <atkin901@gmail.com>
  *  Mark Murray <markm@FreeBSD.org>
  *  Mark Pulford <mark@kyne.com.au>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  Martin Dieringer <martin.dieringe@gmx.de>
  *  Martin Dieringer <martin.dieringer@gmx.de>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Martin Neubauer <m.ne@gmx.net>
  *  Martin Sugioarto <martin.sugioarto@udo.edu>
  *  Martin Tournoij <carpetsmoker@rwxrwxrwx.net>
  *  Martin Tournoij <carpetsmoker@xs4all.nl>
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Mateusz Piotrowski <0mp@FreeBSD.org>
  *  Mathieu Arnold
  *  Matthew Luckie <mjl@luckie.org.nz>
  *  Matthew X. Economou <xenophon+fbsdports@irtnog.org>
  *  Matthias Fechner <mfechner@FreeBSD.org>
  *  Matthieu Volat <mazhe@alkumuna.eu>
  *  Maurice Castro <maurice@serc.rmit.edu.au>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Gmelin <freebsd@grem.de>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Johnson <ahze@ahze.net>
  *  Michael Nottebrock <lofi@FreeBSD.org>
  *  Michael Reifenberger <mr@FreeBSD.org>
  *  Mike Krutov <neko@takino.org>
  *  Mikhail T. <mi@aldan.algebra.com>
  *  Mikhail Teterin <mi@aldan.algebra.com>
  *  Muhammad Moinur Rahman <5u623l20@gmail.com>
  *  NAKATA Maho <maho@FreeBSD.org>
  *  Naram Qashat <cyberbotx@cyberbotx.com>
  *  Nick Hilliard <nick@foobar.org>
  *  Nicola Vitale <nivit@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Nikolay Korotkiy <sikmir@gmail.com>
  *  Norio Suzuki <nosuzuki@e-mail.ne.jp>
  *  Oliver Heesakkers <dev2@heesakkers.info>
  *  Oliver Lehmann <oliver@FreeBSD.org>
  *  Olivier Duchateau
  *  Paul Everlund
  *  Pav Lucistnik <pav@FreeBSD.org>
  *  Pedro F. Giffuni
  *  Pedro Garcia Freitas <sawp@sawp.com.br>
  *  Pedro Giffuni
  *  Pedro Giffuni <pfg@FreeBSD.org>
  *  Pete Fritchman <petef@FreeBSD.org>
  *  Pete Fritchman <petef@databits.net>
  *  Peter Ankerstal <peter@pean.org>
  *  Peter Jeremy <peterjeremy@optushome.com.au>
  *  Peter Schmiedeskamp <pschmied@qwest.net>
  *  Phil Phillips <pphillips@experts-exchange.com>
  *  Pietro Cerutti <gahr@FreeBSD.org>
  *  Pietro Cerutti <gahr@gahr.ch>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Piotr Smyrak <smyru@heron.pl>
  *  Piotr Smyrak, piotr.smyrak@heron.pl
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Quentin Stievenart <acieroid@awesom.eu>
  *  R Joseph Wright <rjoseph@mammalia.org>
  *  Radim Kolar
  *  Rainer Hurling <rhurlin@gwdg.de>
  *  Randall Hopper
  *  Randall Hopper <aa8vb@ipass.net>
  *  Randall Hopper <aa8vb@nc.rr.com>
  *  Reinier de Blois <rddeblois@gmail.com>
  *  Richard Hwang <rhwang@bigpanda.com>, Mikhail Teterin
<mi@aldan.algebra.com>, Jun-ichiro itojun Itoh <itojun@itojun.org>
  *  Rick Elrod <codeblock@eighthbit.net>
  *  Rob Farmer <rfarmer@predatorlabs.net>
  *  Rod Person <rodperson@rodperson.com>
  *  Roland Jesse <roland.jesse@gmx.net>
  *  Romain Tartiere <romain@FreeBSD.org>
  *  Ron van Daal
  *  Ronald Kuehn <rk@ronald.org>
  *  Rong-En Fan <rafan@infor.org>
  *  Rusmir Dusko <nemysis@FreeBSD.org>
  *  Rusty Nejdl <rnejdl@ringofsaturn.com>
  *  Ryan Melcer <rmelcer@iteris.com>
  *  Ryan Steinmetz <zi@FreeBSD.org>
  *  Sahil Tandon <sahil@FreeBSD.org>
  *  Sam Lawrance
  *  Satoshi Asami <asami@FreeBSD.org>
  *  Satoshi Taoka <taoka@FreeBSD.org>
  *  Seiichirou Hiraoka
  *  Serge Negodyuck <petr@petrovich.kiev.ua>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Sergey V. Dyatko <sergey.dyatko@gmail.com>
  *  Shane Ambler
  *  Shaun Amott <shaun@inerd.com>
  *  Shell Hung <shell@shellhung.org>
  *  Shigeyuki FUKUSHIMA <shige@FreeBSD.org>
  *  Simun Mikecin <numisemis@yahoo.com>
  *  Sofian Brabez <sbrabez@gmail.com>
  *  Stanislav Sedov <ssedov@mbsd.msk.ru>
  *  Stanislav Sedov <stas@FreeBSD.org>
  *  Stas Timokhin <devel@stasyan.com>
  *  Stas Timokhin <stast@bsdportal.ru>
  *  Stefan Walter <sw@gegenunendlich.de>
  *  Stephen Roome <steve@pepcross.com>
  *  Steve Wills <steve@meatwad.mouf.net>
  *  Steve Wills <swills@FreeBSD.org>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Steven Wallace <swallace@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKAHASHI Kaoru <kaoru@kaisei.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  TAKATSU Tomonari <tota@rtfm.jp>
  *  TAOKA Fumiyoshi
  *  TATEISHI Katsuyuki <katsu@iec.hiroshima-u.ac.jp>
  *  Tassilo Philipp <tphilipp@potion-studios.com>
  *  Thibault Payet <monwarez@mailoo.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Dreibholz <dreibh@iem.uni-due.de>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Thomas Hurst <tom@hur.st>
  *  Tilman Linneweh <arved@FreeBSD.org>
  *  Tim Bishop <tim@bishnet.net>
  *  Tod McQuillin <devin@spamcop.net>
  *  Tomoyuki Sakurai <cherry@trombik.org>
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  UMENO Takashi <umeno@rr.iij4u.or.jp>
  *  Ulrich Spoerlein <q@uni.de>
  *  Vasil Dimov <vd@FreeBSD.org>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vincent Tantardini <vinc@FreeBSD-fr.org>
  *  Vladimir Chukharev
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Wen heping <wenheping@gmail.com>
  *  Wen heping<wenheping@gmail.com>
  *  Will Andrews <andrews@technologist.com>
  *  Yi-Jheng Lin <yzlin@cs.nctu.edu.tw>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yinghong Liu <relaxbsd@gmail.com>
  *  Yinghong.Liu <relaxbsd@gmail.com>
  *  Yuan-Chung Hsiao <ychsiao@ychsiao.org>
  *  Yukihiro Nakai <Nakai@Mlab.t.u-tokyo.ac.jp>
  *  Yukihiro Nakai <nacai@iname.com>
  *  Yukihiro Nakai <nakai@mlab.t.u-tokyo.ac.jp>
  *  Yuri Victorovich <yuri@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  Yuu Yashiki
  *  Yuzo FURUKAWA <hurukawa@kuee.kyoto-u.ac.jp>
  *  Zhihao Yuan <lichray@gmail.com>
  *  Zsolt Udvari <udvzsolt@gmail.com>
  *  ache
  *  alepulver
  *  anhot
  *  antonakis@gmail.com
  *  argv[0] (Iouri V. Ivliev)
  *  arved
  *  asami
  *  bf <bf@FreeBSD.org>
  *  bmc@WillsCreek.COM
  *  buganini@gmail.com
  *  cacho@mexicano.gdl.iteso.mx
  *  cartola (Carlos E. G. Carvalho)
  *  cartola@openit.com.br
  *  cfs@ing.puc.cl (original)
  *  chinsan
  *  chinsan <chinsan.tw@gmail.com>
  *  coryking
  *  cracauer@cons.org "Martin Cracauer"
  *  demon@FreeBSD.org
  *  dillon
  *  dom@happygiraffe.net
  *  erich@FreeBSD.org
  *  fenner
  *  fernan@iib.unsam.edu.ar
  *  frankch@waru.life.nthu.edu.tw
  *  gahr
  *  gary@hotlava.com
  *  gerard
  *  giffunip@asme.org
  *  glebius@FreeBSD.org
  *  gurkan@phys.ethz.ch
  *  hsu
  *  ijliao
  *  jamie
  *  jedgar@FreeBSD.org
  *  jeff@cetlink.net
  *  jjachuf@gmail.com
  *  jmz
  *  johalun
  *  johan
  *  johans
  *  kwm@FreeBSD.org
  *  lbartoletti <lbartoletti@FreeBSD.org>
  *  lesi@FreeBSD.org
  *  lichray@gmail.com
  *  luigi@FreeBSD.org
  *  maho@FreeBSD.org
  *  marcus@FreeBSD.org
  *  mb@imp.ch
  *  mi
  *  mm@FreeBSD.org
  *  nemysis <nemysis@gmx.ch>
  *  nik
  *  nork@FreeBSD.org
  *  olgeni@FreeBSD.org
  *  paulo@isr.uc.pt
  *  petef@FreeBSD.org
  *  pgs
  *  ports@FreeBSD.org
  *  proff@iq.org
  *  punkt.de Hosting Team <mops@punkt.de>
  *  rfarmer@predatorlabs.net
  *  roberto
  *  roland.jesse@gmx.net
  *  rpsfa@rit.edu
  *  saper@system.pl
  *  smace
  *  sobomax
  *  stas
  *  stb@lassitu.de
  *  theraven@FreeBSD.org
  *  thierry@pompo.net
  *  tobez
  *  trasz <trasz@pin.if.uz.zgora.pl>
  *  trevor
  *  vanilla
  *  will
  *  wolman@cs.washington.edu
  *  yukinopo@livedoor.com

With hat:	portmgr

    022e658

13:50 Tobias C. Berner (tcberner) 

framework: Add new USES 'magick' for graphics/ImageMagick*

A new USES has been added to depend on ImageMagick.

	USES=magick

adds a LIB_DEPENDS on graphics/ImageMagick${IMAGEMAGICK_DEFAULT}.

If a specific version is required, use for example

	USES=magick:6        resp.     USES=magick:7

If only a build, run or test is required, use for example

	USES=magick:build    resp.     USES=magick:6,build,test

If a dependency on the nox11 flavor is required, use for example

	USES=magick:nox11    resp.     USES=magick:7,nox11,run,test

See magick.mk for more details on the available flags.

The tree has been completely converted to make use of this.

Approved by:	bapt
Differential Revision: https://reviews.freebsd.org/D32754

    45526ec

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

14:46 fluffy 

graphics/zbar:	unbreak QT5 build (missed dependency on qt5-buildtools)

Reported by:	poudriere failure
Approved by:	portmgr (fix build)

 

07:54 fernape 

graphics/zbar: update to 0.23.90

ChangeLog: https://github.com/mchehab/zbar/releases/tag/0.23.90

PR:	253743
Submitted by:	vvd@unislabs.com
Approved by:	dev2@heesakkers.info (maintainer, timemout > 1 week)

 

12:11 tcberner 

graphics/zbar: use IMAGEMAGICK_DEFAULT

- switch to USES=localbase

PR:		253444
Submitted by:	VVD <vvd@unislabs.com>
Approved by:	Oliver Heesakker s<dev2@heesakkers.info> (maintainer)

 

11:12 antoine 

Remove optional dependency on pygtk2

With hat:	portmgr

 

12:39 tobik 

Add USES={gl,gnome,mate,sdl,xorg} missed in the last round

 

20:20 zeising 

Sprinkle more USES=xorg

 

17:48 tcberner 

graphics/zbar: remove QT4 option (Qt4 deprecation)

Approved by:	portmgr (implicit)

 

10:42 pi 

graphics/zbar: make the ImageMagick an option, 7 the default

PR:		221391
Reported by:	vvd@unislabs.com
Approved by:	dev2@heesakkers.info (maintainer timeout)

 

19:39 pi 

graphics/zbar: work with ImageMagick-7 instead of -6

PR:		221391
Submitted by:	Mikhail T. <mi@ALDAN.algebra.com>
Approved by:	Oliver Heesakkers <dev2@heesakkers.info> (maintainer)

 

15:41 rene 

Mark QT4 ports/functionality for removal on 2019-03-15

While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.

Submitted by:	tcberner
Reviewed by:	adridg, jhale, rene, tcberner
Approved by:	portmgr (implicit, flavor hook)
Differential Revision:	https://reviews.freebsd.org/D17741

 

19:57 kwm 

Update ImageMagick to 6.9.10.14 [1]

* Add PKGNAMESUFFIX and rename the directory. This was done to show
  that IM6 is not the "main" version. But still fully supported by upstream.
* Convert a number of options to optionhelpers.
* Add option for ISO/IEC 23008-12:2017 HEIF suport
* Add comment to pkg-descr explaining IM6's "legacy" tag.
* Add comment to the patch-config_policy.xml file why it still needed.

Please note that IM7 is not a drop in replacement due to library API and
command arguments changes. And as a result ports need to decide for themself
which version to use.

Chase these changes in all the ports that using IM6.

PR:		225102 (based on, only the version update) [1]
Submitted by:	Pascal Christen <pascal.christen@hostpoint.ch>

 

08:04 riggs 

Bump PORTREVISION to chase update of multimedia/v4l_compat and libv4l

 

17:39 tcberner 

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

 

11:10 antoine 

Reduce dependency on the python2 metaport

PR:		225752
Submitted by:	Yasuhiro KIMURA

 

15:36 kwm 

ImageMagick to 6.9.9-15.

* Disable FPX (FlashPix) support by default. This image format is really
  rare these days coupled with that there are known CVE's in libfpx and
  it doesn't seem to be maintained these days. It doesn't make sense to
  keep it enabled by default anymore. [1]
* Add new option for RAW support
* Fix portscout macro to only show 6.9.x versions

Bump other ports for the shared library bumps in IM 6.

PR:		222309 [1]
Submitted by:	Anton Yuzhaninov <citrin+pr@citrin.ru> [1]

 

08:20 kwm 

Chase ImageMagick shlib bump

 

15:21 mat 

Use USES=pathfix where applicable.

PR:		213195
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D8093

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

19:37 amdmi3 

- Switch to options helpers
- While here, add some NO_ARCHes

Approved by:	portmgr blanket

 

15:03 tijl 

By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do.  On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).

Bump PORTREVISION on all ports where the build log contains -export-symbols.

audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions.  Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to.  Fix a number of other issues in the same
Makefile.am and clean up the port Makefile.

japanese/scim-honoka: Tries to hide all symbols that start with an
underscore, but because this library is written in C++ all symbols start
with _Z so it ends up hiding everything.  Just don't hide anything at all
like the textproc/scim configure script does.

multimedia/schroedinger: Apply an upstream patch.

textproc/scim-input-pad: Same as japanese/scim-honoka.

PR:		201922
Approved by:	portmgr (antoine)
Exp-run by:	antoine

 

18:33 antoine 

Convert to USES=jpeg

 

20:09 marino 

graphics category: Remove $PTHREAD_LIBS

graphics/zbar didn't pass check-plist (pre-existing), fixed.

approved by:	PTHREAD blanket

 

12:35 kwm 

Update ImageMagick to 6.9.0-10.

- USES=pkgconfig:both since the *-config scripts are wrappers around pkg-config.
- Don't require ghostscript for the freetype2 option.
- Actualy remove the pkg-help file with is obsolete since r377347 when the
  library names where normalized.

Due to libMagick++-6.so bump, chase depend ports.

 

21:12 kwm 

Update ImageMagick to 6.9.0.4.

- Normalize the ImageMagick library name so it stays the same regardless of
  what the 16-bit and HDRI option are set to [1]. Teach cmake to look for
  the new name. Bump ports that link to the libraries due to this.
- As a result do away with the "HALFSUPPORTED" option block, and list
  16-bit and HDRI with the other options.
- ImageMagick ships a basic SVG plugin when not using librsvg2 for SVG
  support. This basic SVG plugin needs libxml2 to work [2]. Make libxml2
  a mandatory dependency (instead of only when the SVG option was selected).
- Don't touch .keep files in the modules directory, there files there so
  it useless.

PR:		194949 [1]
PR:		195227 [2]
Requested by:	many [1]
Submitted by:	software-freebsd@interfasys.ch [2]

 

08:47 mva 

- Convert <OPTION>_USE= PYTHON... to <OPTION>_USES= python...

With hat:	python@

 

09:55 kwm 

Remove * from LIB_DEPENDS lines and specify the default library name
for ImageMagick. Using '*' it is unsupported and potention bugs here.

 

15:35 adamw 

Use OPTIONS helpers.

 

15:30 adamw 

Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.

 

07:58 riggs 

- Fix build/staging of graphics/zbar for all permutations of OPTIONS
  - CPPFLAGS
  - Get rid of MAN1
- Fix pkg-plist
- Introduce USES=libtool
- Bump PORTREVISION including dependent ports that need rebuild

PR:		187923
Submitted by:	kamikaze@bsdforen.de
Reviewed by:	Oliver Heesakkers <dev2@heesakkers.info> (maintainer)
Approved by:	maintainer, mentors (implicit)

 

17:26 kwm 

Stagify
use new lib_depend syntax.
replace empty() with !

Approved by:	portmgr (blanket)

 

20:05 kwm 

Update to 6.8.9-3 [1][3].

Use USES=compiler:openmp for the OPENMP option[2]
Ditch the use of perl for patching etc [4] and silence perl threaded check [6]
-delay option spurious message should be fixed [5]

JASPER option was replace by JPEG2000 for JP2k support.
Put 16BIT_PIXEL and HDRI option separate option block. These options change
  the library name, so the user needs to take this into consideration.
Use new LIB_DEPENDS syntax.
Use @sample for config files.
Sprinkle some USES=pkgconfig for some ports, since we don't pull it in
  anymore at run-time.

PR:		185462 [1]
PR:		187548 [2]
PR:		182793 [3]
PR:		181746 [4]
PR:		176047 [5]
PR:		190814 [6]
Submitted by:	c.petrik.sosa@gmail.com [1]
		Matthieu Volat <mazhe@alkumuna.eu> [2]
		free.bsd@webstyle.ch [3]
		andrnils@gmail.com [4]
		rfg@tristatelogic.com [5]
		Michelle Sullivan <michelle@sorbs.net> [6]
Approved by:	portmgr (blanket) (for NO_STAGED ports)

 

18:28 zeising 

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)

 

21:00 rene 

Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)

 

10:05 marino 

graphics/zbar: Unbreak on F10 and DragonFly

PR:		ports/183572
Submitted by:	marino
Approved by:	Oliver Heesakkers (maintainer, modified)

 

18:35 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

 

14:50 bapt 

Add an explicit dependency on pkgconf

 

14:37 zeising 

The FreeBSD x11 team proudly presents
an zeising, kwm, miwi, bapt, eadler production:

Xorg 7.7

Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities

Additional notes:
Change pkgconf to be a build dependency.
Add a new USE_XORG, xcb, to depend on libxcb and update all ports to use
this.
Trim makefile headers.
Take maintanership of x11/xcb-proto, ok'd by ashish.
If you are running WITH_NEW_XORG=, you need to rebuild all installed
drivers, see UPDATING for more information.
Various fixes to make ports compile.

PR:		ports/177942
Exp-run by:	miwi
Approved by:	portmgr (miwi)

Thanks to all who helped testing!

 

11:59 mva 

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	zeising

 

18:35 bdrewery 

- Chase graphics/ImageMagick update
- Trim header

 

10:23 ak 

- Convert Makefile headers to new style
- Convert to new options framework
- Remove ABI version numbers from LIB_DEPENDS

PR:	ports/172397
Submitted by:	Oliver Heesakkers <dev2@heesakkers.info> (maintainer)

 

06:44 miwi 

- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4

Review by:      bapt, David Naylor (kde team)

05:26 dinoex 

- update png to 1.5.10

00:56 dougb 

Fix LIBDEPENDS != LIB_DEPENDS

Submitted by:   eadler

07:17 mm 

Update ImageMagick to 6.7.2-10 (shlib bumped to .5)

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

22:24 pawel 

- fix plist [1]
- restrict python versions to 2.5-2.7 [1]
- add x11-toolkits/py-gtk2 build/run dep for WITH_PYTHON [2]
- add devel/qt4-moc build dep for WITH_QT4 [2]

PR:             ports/160182
Submitted by:   [1] Oliver Heesakkers <dev2@heesakkers.info> (maintainer)
                [2] myself
Approved by:    miwi, wen (mentors implicit)

14:39 martymac 

ZBar is an open source software suite for reading bar codes from various
sources, such as video streams, image files and raw intensity sensors. It
supports many popular symbologies (types of bar codes) including EAN-13/UPC-A,
UPC-E, EAN-8, Code 128, Code 39, Interleaved 2 of 5 and QR Code.

PR:             ports/152708
Submitted by:   Oliver Heesakkers <dev2 at heesakkers.info>
pproved by:     ehaupt (mentor)