graphics/jasper: Bump PORTREVISION of dependent ports for shlib change after
cdcedd316da6d7c8509c394474160c683489a3ae

graphics/xv: update for jasper 3 support

Fix CONFLICTS entries of multiple ports

There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.

This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.

Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port

graphics/xv: Add CPE information

Approved by:	portmgr (blanket)

Remove # $FreeBSD$ from Makefiles.

Fix build with jasper 2.0.20

- update to 3.1

Update jasper to 2.0.16

This is needed to be able to update gegl to latest version.
Bump revision of all consumer as the ABI is not 100% backward compatible.
Provide a patch for graphics/devil to properly build with latest jasper.
While here add a missing USES=xorg to graphics/devil

Add USES=xorg USES=gl, ports categories g

Add USES=xorg and USES=gl to ports in categories starting with 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

Extract do-patch into a separate script.

PR:		215761
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D9029

- Fix trailing whitespace in pkg-descrs, categories [g-n]*

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Convert to USES=jpeg

Don't let xv change its name when options change.

With hat:	portmgr
Sponsored by:	Absolight

Remove USE_GCC added by mistake

Bump portrevision after png update

Finish properly support png 1.5

Properly support png 1.5

Obtained from:	Gentoo

Cleanup plist

Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.

- use STAGEDIR
- remove option NOMAN
- use OPTIONS_DEFINE
- merge xv-m17m in xv

- fix misplaced NO_STAGE in slaveports and ifdefs

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

New USES imake to handle the dependency on imake.

This uses accept 'env' as an argument for ports that do use their own or a
different do-configure target.

Modify xmkmf so it accept IMAKECPPFLAGS as default flags for imake and pass it
to the called imake.
Modify xorg-cf-files (the FreeBSD.cf configuration file) to allow CppCmd to be
overwritten.
Pass CppCmd CcCmd and CplusplusCmd via command line to each call of imake via
IMAKECPPFLAGS
Pass IMAKE_DEFINE with the above arguments to MAKE_ARGS so that imake spawned
from Makefile generated by a previous
imake also inherit the defined CppCmd CcCmd and CplusplusCmd.
Make imake use devel/tradcpp all the time, so that when buidling with clang we
do not depend on gcc's cpp.
Make imake respect CC and CXX
Make imake respect USE_GCC (if set imake will use gcc's cpp).

While here:
- Remove a couple of indefinite articles from comments
- Trim headers
- Fix a couple of ports to build with clang or use: USE_GCC=any
- Fix a now useless redefinition of the extraction chain
- Fix a typo in japanese/Wnn7-lib bundled imake template definitions
- Fix some XMKMF execution with no env specified
- Use options helper in x11/xautolock to simplify the port

- cleanup header
- strip shlibversion in depedency

Force numerous ports that fail to build with clang over to instead always
rely on gcc.  The patch uses the new USE_GCC=any code in Mk/bsd.gcc.mk to
accomplish this.

The ports chosen were ports that blocked 2 or more ports from building with
clang.  (There are several hundred other ports that still fail to build with
clang, even with this patch.  This is merely one step along the way.)

Those interested in fixing these ports with clang, and have clang as their
default compiler, can simply set FORCE_BASE_CC_FOR_TESTING=yes.

For those who have gcc as their default compiler, this change is believed
to cause no change.

Hat:		portmgr
Tested with:	multiple runs on amd64-8-exp-bcm and 9-exp-clang, with various
		combinations of patch/no-patch and flag settings.

- update png to 1.5.10

- make check safer

- fix build with clang by disabling optimisation
Feature safe:   yes

-remove MD5

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- add workaround for a deadlock in libxcb
PR:             143043

- update to jpeg-8

- Security fix
fix out of bound error, introduced in jumbo2 patch
Reported by:    naddy (Christian Weisgerber)
Submitted by:   Patrick Keshishian
Obtained from:  openbsd
Feature safe:   yes

- Switch SourceForge ports to the new File Release System: categories starting
with G

- update to jpeg7
Tested by:      pav on pointyhat

- enable support of g3 fax
- fix initial display with -nolimit
Reported by:    Michiel Boland

- fix build of xv-m17n

- use jumbo patches
- support jasper
- many bugfixes

- add LICENSE:

- update USE_XORG

- set USE_XORG

- fix text
PR:             113911
Submitted by:   Fred Clift

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- fix build with gcc42

- fix build with gcc41

- take maintainership

Reset inactive maintainer who has not responded to email.

Hat:            portmgr

With 24/32-bit xwd files, xv swaps the red and blue channels.  With 16-bit xwd
files, the image is very dark green (almost black).

Both problems are caused by hard-coding the channel order and offsets, rather
than using the colour masks in the xwd header.

xv reads the input into a 24-bit internal image, which is then displayed.  The
lack of brightness in the 16-bit display is because the colour values are copied
into the low-order bits of the internal pixmap rather than the high order bits.
The green hue is because the green channel has 6 bits, whereas red and blue only
have 5 bits, making the green twice as (relatively) bright.

The new patch solves that problem.

PR:             96971
Submitted by:   Peter Jeremy <peterjeremy@optushome.com.au>
Approved by:    Miguel Mendez <mmendez@gmail.com> (maintainer)

- Fix mastersite.

PR:             ports/91058
Approved by:    Miguel Mendez (maintainer), mnag (mentor)

- add SHA256

Remove obsolete mastersites.

Source:         distfile survey
Approved by:    maintainer

Fix format string vulnerability.

Security:      
http://vuxml.FreeBSD.org/a4bd3039-9a48-11d9-a256-0001020eed82.html
Security:       CAN-2005-0665
Obtained from:  Gentoo Linux
Approved by:    portmgr (marcus), erwin (mentor), maintainer

Miguel Mendez is the new victim of these ports. Thanks!

Reset MAINTAINER to ports@.
We cannot contact them for a long time.

Discussed with: hrs
Approved by:    kiri(blanket), mita(blanket),
                shige(blanket), taoka(blanket)

farewell to libxpg4.

- import securitry patches
- update FixPix4xv.patch
PR:             72382
Approved by:    portmgr (linimon) and shige
Obtained from:  SuSe

Mark FORBIDDEN due to exploitable buffer overflows.
http://vuxml.freebsd.org/fffacc93-16cb-11d9-bc4a-000c41e2cdad.html

Approved by:    portmgr

Utilize DOCSDIR/PORTDOCS.

PR:             ports/67989
Submitted by:   Piotr Smyrak <smyru@smyrak.com>
Approved by:    shige (blanket)

SIZEify (maintainer timeout)

Define USE_PERL5_BUILD, not erroneous USE_PERL.

Submitted by:   Oliver Eikemeier

Define USE_PERL to make Perl available for (mostly deprecated)
"perl -pi -e" construction.

Remove pkg-comment from remaining master/slave port sets.

Approved by:    portmgr (implicitly)

Fix build-breakage.

Submitted by:   Patrick Li <pat@FreeBSD.org>

Apply new bzip2 patch:
  Chagne bunzip2 path from full-path to command name only.

Submitted by:   Ken Stailey <kstailey@speakeasy.net>

fix build of graphics/xv-m17n and japanese/xv.    

Bump png major    

Fix by applying sf's patch.   Thanks, sf!    

I'm sorry.   The previous commit is based on:    

Change MASTER_SITES for fetching xv patches(modified-for-jp-ext-patch).    

Fix broken.   pdf.patch and mp-tiff-patch must be fetched from my own site.  
These are modified for applying after jp-extension-patch.    

Add the PORTREVISION -- something I forgot to do in my   previous commit.    

Add the software's web-site to  the distinfo, which did not have   the WWW entry
before. Add  several more patches available on the   said web-site.  In
particular,  use the later  png-related patch   (-fix3 vs.  -fix2). Move some 
of the patches from  DISTFILES to   PATCHFILES -- for  some others it matters,
because  of the order   they have to be applied and different -p settings
necessary.    

Massive style enforcement - use ^I instead of spaces for variables identation.  
 

Convert category graphics to new layout.  

Bump png shared library version.    

Move the stragler's www.freebsd.org/~user distfiles to the offical  
MASTER_SITE_LOCAL site.