Remove non staged ports without pending PR from g*

many ruby/rubygem ports: death of rubyforge.org

rubyforge.org shutdown on May 15, 2014. This commit accounts for that by doing
several things:

- Deprecate ruby that had only rubyforge.org as MASTER_SITES (and so are now
  only fetchable via our cache)
- Deprecate ports that depend on those
- Update the WWW pkg-descr line that points to rubyforge.org for rubygem ports
  (which are still fetchable from rubygems.org)

The next step will be to remove rubyforge.org from bsd.sites.mk, after these
deprecated ports are deleted.

Phabric:	D591
With hat:	ruby
Approved by:	portmgr (because of committing to unstaged graphics/mingplot port)

Convert a bunch of USE_BZIP2 to USES=tar:bzip2

Approved by:	portmgr (not really, but touches unstaged ports)

Reset maintainership for ports not staged with no pending PR

With hat:	portmgr

Update to 6.8.9-3 [1][3].

Use USES=compiler:openmp for the OPENMP option[2]
Ditch the use of perl for patching etc [4] and silence perl threaded check [6]
-delay option spurious message should be fixed [5]

JASPER option was replace by JPEG2000 for JP2k support.
Put 16BIT_PIXEL and HDRI option separate option block. These options change
  the library name, so the user needs to take this into consideration.
Use new LIB_DEPENDS syntax.
Use @sample for config files.
Sprinkle some USES=pkgconfig for some ports, since we don't pull it in
  anymore at run-time.

PR:		185462 [1]

Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. Categories G-I.

CR:		D201
Approved by:	portmgr (bapt)

Mark as broken non staged ports using the ruby framework

With hat:	portmgr

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

- Remove Author line

- Use single space after WWW:

- Update to 2.13.2

- Add X11 option

PR:		ports/178044
Submitted by:	David Demelier <demelier.david@gmail.com>

- Chase graphics/ImageMagick update
- Remove ABI version from MagickWand
- Trim header

- Unmark broken, it builds fine now that HDRI has been disabled by default
  in ImageMagick

- Mark BROKEN: does not configure
  checking for ImageMagick version >= 6.4.9... yes
  checking for HDRI disabled version of ImageMagick... no
  Can't install RMagick 2.13.1.
  RMagick does not work when ImageMagick is configured for High Dynamic Range
Images.
  Don't use the --enable-hdri option when configuring ImageMagick.

Reported by:    pointyhat

- update png to 1.5.10

Send ports@ ruby ports over ruby@
most of these were from stas@

- Return my ports back to the pool.  I was unable to make any fixes to
  my ports in the past 3 weeks while ports were broken on any 10.x
  machines, which means I'm unable to maintain them.  So let people know
  that there's no available support for them until things are back to
  normal (which also means that anyone with spare time will be able
  to fix them without getting approval).

Update ImageMagick to 6.7.2-10 (shlib bumped to .5)

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

-remove MD5

Clean up ruby pkg-plists:
    %%RUBY_SITEARCHLIBDIR%%
    %%RUBY_SITELIBDIR%%
    lib/ruby/site_ruby
    %%RUBY_VENDORARCHLIBDIR%%
    %%RUBY_VENDORLIBDIR%%
    lib/ruby/vendor_ruby
    lib/ruby

Above directories are owned by lang/ruby1[89] ports.

PR:         ports/153041
Tested by:  2-exp runs by pav
With Hat:   ruby@

Update ImageMagick to 6.6.2-10

- Convert to RF macro

With Hat:   ruby@

- Update to 2.13.1.

- Unbreak and fix changed API

Approved by:    maintainer (stass)

- Bump Magick++, MagickWand or MagickCore dependency

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Update to 2.13.0.

- Update to 2.12.2.

- Update to 2.12.0.

PR:             ports/139418
Submitted by:   Wen Heping <wen@FreeBSD.org>

- Update to 2.11.0.

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Update to 2.10.0.

- Update to 2.9.2.

- Don't fail if some tests fails. It is needed if some features in
  ImageMagick are missed (e.g. GS support). Rmagick doesn't check if all
  features are available when running tests.

Reported by:    demon@

- Update ImageMagick to 6.4.9.2
- Libraries Magick++, MagickCore and MagickWand bumped to 2
- Update all ports using libraries above

- Update to 2.9.1.

- Update to 2.8.0.

- Fix plist.

Reported bu:    erwin

- Update to 2.7.0.

- Update to 2.5.2.

- Update to 2.5.0.

- Update to 2.3.0
- Drop support for GraphicsMagick (was abandoned in upstream).

- Update to 1.5.13 (this fix the build with the new ImageMagick)

Approved by:    stas (maintainer via irc)

- Chase graphics/ImageMagick shlib version bump

Pointyhat to: mi@

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Update to 1.15.10.

This update brings support for new API functions.

- Update to 1.15.9 (bugfixes).

- Update to 1.15.7.

PR:             ports/114037 (based on)
Submitted by:   Roderick van Domburg <r.s.a.vandomburg@nedforce.nl>

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 1.15.5.

- Update to 1.15.4.

- Update to 1.15.3.

- Update to 1.15.2

- Update to 1.14.1

- Update to 1.13.0
- Take maintainership
- Make port PREFIX-clean

PR:             ports/102650
Approved by:    sem (mentor)

- Fix plist.
- Bump portrevision.

Reported by:    krismail

- Fix plist.
- Bump portrevision.

Reported by:    krismail

- Fix plist.
- Bump portrevision.

Reported by:    krismail

- fix pkg-plist

Noted by:       krisbot

- Change to use MASTER_SITE_RUBYFORGE macro to fix fetch problem.

Approved by:    portmgr (erwin)

* Update to 1.12.0.
* remove BUILD_DEPENDS of wmf, since it should addressed in
  GraphicsMagick or ImageMagick
* Propagate the NOPORTDOCS setting to the software build using
  --disable-htmldoc on the configure script

PR:             ports/98907
Submitted by:   Rui Lopes <rgl_AT_ruilopes dot com>

- Fix plist [1]
- While i'm here update to 1.11.0
- Remove BROKEN since now build's fine on 4.x
- portlint(1)

Notified by:    krismail [1]

- Change dependencies reflecting update in graphics/ImageMagick
- Bump PORTREVISION

Chase libversion bumb to libMagick.so.9

PR:             ports/91270

[PATCH] Update port: graphics/ruby-rmagick to 1.9.3

        Updates RMagick to the latest release, 1.9.3. Also adds an option to
build against GraphicsMagick rather than ImageMagick.

PR:             ports/90886
Submitted by:   Nick Muerdter <spam@nickm.org>

- Add SHA256

- Fix fetching

With portmgr hat on, reset maintainership of knu's ports since he has
been inactive more than 6 months.  We hope to see him back sometime.

- Update to 1.9.0

PR:             ports/82315 (based on)
Submitted by:   Bjorn Konig <bkoenig@cs.tu-berlin.de>
Approved by:    maintainer timeout (1 month)

- Add missed build dependency to fix plist on i386
- Mark BROKEN, ruby segfaults on build, blowing plist on amd64

Reported by:    krismail
Approved by:    portmgr (krion)

- Chase ImageMagick shlib bump

PR:             ports/78455
Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com> (ImageMagick's
maintainer)

BROKEN on 4.x: Does not compile

Approved by:    portmgr (self)

Update to 1.7.0.

This port is scheduled to be removed on 2005-02-18 if it is still
broken at that time, and a fix has not been submitted to GNATS.

Bump portrevision and dependency on ImageMagick
in order to trace recent ImageMagick update.

Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com>
PR:             ports/74487
Approved by:    mat
Reviewed by:    lofi

BROKEN: Does not compile

Update to 1.5.0.

Chase the master site's HTTP redirection.

Mark unBROKEN.  This port is not broken itself but fails to build
because ImageMagick is somehow built without the FreeType support
enabled although the --with-ttf flag is given.

BROKEN: Does not compile

Update to 1.4.0.

Update to 1.3.2.

USE_REINPLACE need be defined only when REINPLACE_CMD is used.

Chase lib version change of graphics/ImageMagick.
Bump PORTREVISION acordingly.

Update to 1.3.1.

Update to 1.3.0.

Add missing PATCH_DIST_STRIP=-p1.

Notified by:    kris

Update to 1.2.2.1, a patch release.

Update to 1.2.2.

Update to 1.1.0.  The latest version of ImageMagick from ports is
required.

Update to 1.0.0.

De-pkg-comment.

Update to 0.9.5.

Change the PORTNAME from "rmagic" to "rmagick". ;)

Update to 0.9.3.

Add ruby-rmagick (RMagick), a binding for ImageMagick.  Defines
approx. 120 methods for 2D image manipulation.  HTML documentation
contains usage guide and API reference, including 116 complete example
programs and images.

Make sure that you have the latest version of libwmf (>= 0.2.7) before
installing this library.  libwmf 0.2.6 seems to have a bug that causes
coredump.