Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>

framework: Add new USES 'magick' for graphics/ImageMagick*

A new USES has been added to depend on ImageMagick.

	USES=magick

adds a LIB_DEPENDS on graphics/ImageMagick${IMAGEMAGICK_DEFAULT}.

If a specific version is required, use for example

	USES=magick:6        resp.     USES=magick:7

If only a build, run or test is required, use for example

	USES=magick:build    resp.     USES=magick:6,build,test

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

Remove # $FreeBSD$ from Makefiles.

Clean up LLD_UNSAFE from openal-soft ports

After FreeBSD 12.0 EOL we no longer have to worry about LLD 6 and
can drop LLD_UNSAFE from openal-soft ports.  LLD can link them fine
now but some ports needs a little help on i386 (-Wl,-znotext).

PR:		226980
Reviewed by:	jbeich (earlier version)
Differential Revision:	https://reviews.freebsd.org/D23030

Add USES=xorg USES=gl, ports categories g

Add USES=xorg and USES=gl to ports in categories starting with 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

graphics/reallyslick: fix build

Switch to ports GCC to fix:
/usr/local/lib/libgraphite2.so.3: undefined reference to
`__cxa_throw_bad_array_new_length@CXXABI_1.3.8'

Approved by:	mentors (implicite approval)

Update ImageMagick to 6.9.10.14 [1]

* Add PKGNAMESUFFIX and rename the directory. This was done to show
  that IM6 is not the "main" version. But still fully supported by upstream.
* Convert a number of options to optionhelpers.
* Add option for ISO/IEC 23008-12:2017 HEIF suport
* Add comment to pkg-descr explaining IM6's "legacy" tag.
* Add comment to the patch-config_policy.xml file why it still needed.

Please note that IM7 is not a drop in replacement due to library API and
command arguments changes. And as a result ports need to decide for themself
which version to use.

Chase these changes in all the ports that using IM6.

PR:		225102 (based on, only the version update) [1]
Submitted by:	Pascal Christen <pascal.christen@hostpoint.ch>

graphis/reallyslick: Fix build with Clang 6

hyperspace.cpp:387:19: error: non-constant-expression cannot be narrowed from
type 'double' to 'float' in initializer list [-Wc++11-narrowing]
        float diff[3] = {flarepos[0] - camPos[0], flarepos[1] - camPos[1],
flarepos[2] - camPos[2]};
                         ^~~~~~~~~~~~~~~~~~~~~~~

http://beefy11.nyi.freebsd.org/data/head-i386-default/p478276_s338342/logs/errors/reallyslick-0.9.1_20.log

- Attempt build on arm* again; the error message is the same as on amd64/i386
- Mark as LLD_UNSAFE when compiled with FREEALUT=on because of OpenAL [1]

PR:		226980 [1]

Mark broken on armvX.

While here, pet portlint.

Bump portrevision to chase graphics/glew shard library version update.

PR:		223370
Submitted by:	zeising
exp-run by:	antoine
Approved by:	antoine

ImageMagick to 6.9.9-15.

* Disable FPX (FlashPix) support by default. This image format is really
  rare these days coupled with that there are known CVE's in libfpx and
  it doesn't seem to be maintained these days. It doesn't make sense to
  keep it enabled by default anymore. [1]
* Add new option for RAW support
* Fix portscout macro to only show 6.9.x versions

Bump other ports for the shared library bumps in IM 6.

PR:		222309 [1]
Submitted by:	Anton Yuzhaninov <citrin+pr@citrin.ru> [1]

Chase ImageMagick shlib bump

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Update ImageMagick to 6.9.0.4.

- Normalize the ImageMagick library name so it stays the same regardless of
  what the 16-bit and HDRI option are set to [1]. Teach cmake to look for
  the new name. Bump ports that link to the libraries due to this.
- As a result do away with the "HALFSUPPORTED" option block, and list
  16-bit and HDRI with the other options.
- ImageMagick ships a basic SVG plugin when not using librsvg2 for SVG
  support. This basic SVG plugin needs libxml2 to work [2]. Make libxml2
  a mandatory dependency (instead of only when the SVG option was selected).
- Don't touch .keep files in the modules directory, there files there so
  it useless.

PR:		194949 [1]
PR:		195227 [2]
Requested by:	many [1]
Submitted by:	software-freebsd@interfasys.ch [2]

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

Remove * from LIB_DEPENDS lines and specify the default library name
for ImageMagick. Using '*' it is unsupported and potention bugs here.

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

converters/fribidi:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip

- Fix missing library problems when the linker enforces explicit linking

PR:		192062
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Update to 6.8.9-3 [1][3].

Use USES=compiler:openmp for the OPENMP option[2]
Ditch the use of perl for patching etc [4] and silence perl threaded check [6]
-delay option spurious message should be fixed [5]

JASPER option was replace by JPEG2000 for JP2k support.
Put 16BIT_PIXEL and HDRI option separate option block. These options change
  the library name, so the user needs to take this into consideration.
Use new LIB_DEPENDS syntax.
Use @sample for config files.
Sprinkle some USES=pkgconfig for some ports, since we don't pull it in
  anymore at run-time.

PR:		185462 [1]

- Switch to USES=libtool, drop .la files

- Add staging support
- Convert to new LIB_DEPENDS format, USES=tar:bzip2
- Use options helpers

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Convert the tree to USES=openal

Approved by:	portmgr (bapt)

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

Fix build with linker that does not copy the dt_need from libraries it links
with like recent binutils. [1]
Trim header
Convert to USES=gmake

Obtained from:	DPorts [1]

This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.

If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.

PR:		ports/177081
Reviewed by:	bapt
Approved by:	portmgr (miwi)

- Bump port after ImageMagick update
- Remove version
- Bump PORTREVISION

Switch from libglut to freeglut and retire libglut. Libglut hasn't been
developed in years and has been dropped from the MESA 8.0 distribution.
Freeglut is a rewrite of glut and is actively developed and is used by
many linux distributions instead of libglut.

Bump all ports that directly depend on libglut because of the shlib version
change.

There are some extra items in this patch.

*) Because freeglut doesn't have the same dependancies as libglut, some ports
	need extra dependencies added to USE_XORG to make them build.
*) Mark graphics/f90gl broken, f90gl depends on a header that is only shipped
	with libglut.
*) Remove option for libglut/freeglut selection in games/cake, only freeglut
	remains now.
*) While here fix a png related build issue games/vegastrike.

Thanks to miwi for running the exp-run.

Approved by:	portmgr (miwi)

Collaboration with:	zeising@
Obtained from:	xorg-dev staging area.

Conver to new options framework

- update png to 1.5.10

Update ImageMagick to 6.7.2-10 (shlib bumped to .5)

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

-remove MD5

Update ImageMagick to 6.6.2-10

- Add glew to the list of supported USE_GL variables
- Patch ports depending on GLEW directly

Approved by:    portmgr (pav)

- Bump Magick++, MagickWand or MagickCore dependency

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Introduce USE_OPENAL variable for OpenAL consumers
- Switch to openal-soft as a default OpenAL implementation

PR:             ports/142123
Submitted by:   mva
Tested by:      pointyhat exp-run
Approved by:    portmgr (hat)

- Update to 0.9.1

PR:             142981
Submitted by:   Ports Fury

- Switch SourceForge ports to the new File Release System: categories starting
with G

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Update to version 0.9.0

PR:             135034
Submitted by:   Ports Fury

- Update ImageMagick to 6.4.9.2
- Libraries Magick++, MagickCore and MagickWand bumped to 2
- Update all ports using libraries above

Reset dyeske@gmail.com at his request.

Hat:    portmgr

- Fix build

PR:             124089
Submitted by:   Ganael Laplanche <ganael.laplanche@martymac.com>
Approved by:    maintainer

- Mark BROKEN: matrixview.c:83:24: error: magick/api.h: No such file or
directory

Reported by:    pointyhat

- Chase graphics/ImageMagick shlib version bump

Pointyhat to: mi@

- Remove USE_X_PREFIX
- Bump portrevision

Approved by:    David Yeske <dyeske@gmail.com> (maintainer, implicit)

dyeske at yahoo dot com -> dyeske at gmail dot com

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Change dependencies reflecting update in graphics/ImageMagick
- Bump PORTREVISION

Fix build on 4.x.

Reported by:    Kris

Update to 0.8.1.

PR:             ports/95310 (superseding ports/93111*)
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp>
Approved by:    dyeske@yahoo.com (maintainer, timeout 2 months*)

SHA256ify

Approved by: krion@

- Update to 0.7.6

PR:             ports/64998
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp>
Approved by:    maintainer timeout (2 weeks)

SIZEify (maintainer timeout)

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

BROKEN: Broken pkg-plist

De-pkg-comment.

New port reallystick version 0.6.6: OpenGL screensaver collection

Submitted by:   David Yeske <dyeske@yahoo.com