| Port details |
- py-gphoto2 Python bindings for libgphoto2
- 2.5.0 graphics
 =1      2.5.0Version of this port present on the latest quarterly branch. - Maintainer: danfe@FreeBSD.org
- Port Added: 2015-10-13 21:19:12
- Last Update: 2023-09-27 03:47:34
- Commit Hash: 0b601c7
- People watching this port, also watch:: xfce4-power-manager, lightdm
- Also Listed In: python
- License: GPLv3+
- WWW:
- https://pypi.org/project/gphoto2/
- Description:
- python-gphoto2 is a comprehensive Python interface (or binding) to
libgphoto2. It is built using SWIG to automatically generate the
interface code. This gives direct access to nearly all available
libgphoto2 functions, but sometimes in a rather un-Pythonic manner.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}gphoto2>0:graphics/py-gphoto2@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/graphics/py-gphoto2/ && make install clean
- To add the package, run one of these commands:
- pkg install graphics/py-gphoto2
- pkg install py39-gphoto2
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-gphoto2 listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-gphoto2
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1693652752
SHA256 (python-gphoto2/gphoto2-2.5.0.tar.gz) = 97d07a3c42067fcae4525600a4ecad5b6b3d3a181cc4c1d594381f411e599e80
SIZE (python-gphoto2/gphoto2-2.5.0.tar.gz) = 497135
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- pkgconf>=1.3.0_1 : devel/pkgconf
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Library dependencies:
-
- libgphoto2.so : graphics/libgphoto2
- This port is required by:
- for Run
-
- graphics/rapid-photo-downloader
Configuration Options:- ===> The following configuration options are available for py39-gphoto2-2.5.0:
EXAMPLES=on: Build and/or install examples
===> Use 'make config' to modify these settings
- Options name:
- graphics_py-gphoto2
- USES:
- pkgconfig python shebangfix
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
2.5.0
27 Sep 2023 03:47:34
 |
Alexey Dokuchaev (danfe) |
graphics/py-gphoto2: update the port to version 2.5.0
Remove no longer useful DOCS option, propagate EXAMPLES
down to `setup.py', garbage-collect `post-patch' target.
Reported by: portscout |
2.3.4
27 Jun 2023 19:34:34
|
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
2.3.4
14 Mar 2023 06:16:20
|
Alexey Dokuchaev (danfe) |
graphics/py-gphoto2: update the port to version 2.3.4
Reported by: portscout |
2.2.4
11 Jan 2023 15:58:34
|
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
2.2.4
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
2.2.4
04 Jul 2021 07:34:29
|
Alexey Dokuchaev (danfe) |
graphics/py-gphoto2: the port had been updated (+)
- Update to the latest version 2.2.4
- Simplify commit 2e9a47e964 and respect CFLAGS
- Use EXAMPLESDIR_REL and DOCSDIR_REL variables
- Amend the port description text while here |
2.0.0
22 May 2021 03:25:48
|
Alexey Dokuchaev (danfe) |
graphics/*gphoto2;misc/mc: take maintainership. |
2.0.0
22 May 2021 02:13:01
|
Ben Woods (woodsb02) |
*/*: Fix ENOTIME: return my ports to the pool
Reset maintainership of my ports to ports@FreeBSD.org so others can
step in to help where I haven't been able to find the time. |
2.0.0
07 Apr 2021 08:09:01
|
Mathieu Arnold (mat) |
One more small cleanup, forgotten yesterday.
Reported by: lwhsu |
2.0.0
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
2.0.0
28 Dec 2020 23:02:15
 |
antoine |
Drop python 2.7 support from a few ports
With hat: portmgr |
2.0.0
22 Dec 2019 15:26:35
|
woodsb02 |
graphics/libgphoto2 and graphics/gphoto2: Update to 2.5.23
graphics/py-gphoto2: Update to 2.0.0
Changes this release:
http://www.gphoto.org/news/
https://github.com/jim-easterbrook/python-gphoto2/blob/v2.0.0/CHANGELOG.txt |
1.8.2_1
22 Jun 2019 21:11:19
|
linimon |
Remove '-Wno-unused-but-set-variable' on GCC-based systems to fix build:
cc1: error: unrecognized command line option "-Wno-unused-but-set-variable"
Approved by: portmgr (tier-2 blanket) |
1.8.2_1
27 May 2019 10:21:47
|
kai |
graphics/libgphoto2: Update to 2.5.22, graphics/gphoto2: Update to 2.5.20
* Bump PORTREVISION of ports depending on them.
Also while I'm here:
* Add "gnome" to USES if the XML option is enabled to avoid warnings about
using USE_GNOME alone.
* Pet portlint
Notable changes since 2.5.16 (graphics/libgphoto2) [1]:
* Added new USB Ids for various camera types
* Updated translations
* Report file changes via GP_EVENT_FILE_CHANGED (hooked up for Canon EOS
currently) (Only the first 15 lines of the commit message are shown above ) |
1.8.2
18 Jun 2018 14:00:43
|
linimon |
Mark ports broken on powerpc64, categories g-n.
While here, pet portlint and do some other cleanup.
Approved by: portmgr (tier-2 blanket) |
1.8.2
25 Apr 2018 16:42:38
|
amdmi3 |
Switch all pypi.python.org WWWs to a new PyPi home pypi.org where
they now redirect to anyway. All new urls checked to return 200,
I've fixed a couple of them in the process.
Approved by: portmgr blanket, mat |
1.8.2
08 Feb 2018 20:18:09
|
amdmi3 |
Canonicalize PyPi WWWs:
- Switch to https://
- Remove trailing slashes
Approved by: portmgr blanket |
1.8.2
14 Jan 2018 01:23:15
|
woodsb02 |
graphics/libgphoto2: Update to 2.5.16
graphics/gphoto2: Update to 2.5.15
graphics/py-gphoto2: Update to 1.8.2
Also bump PORTREVISION of ports depending on these.
PR: 224611
Submitted by: bsam (graphics/libgphoto2) |
1.7.0
14 Aug 2017 12:56:23
|
woodsb02 |
graphics/gphoto2: Update to 2.5.14
graphics/libgphoto2: Update to 2.5.14
graphics/py-gphoto2: Update to 1.7.0
- Bump dependent ports
- Take maintainership of graphics/gtkam |
1.6.0
01 Jun 2017 16:05:18
|
woodsb02 |
graphics/libgphoto2: Update to 2.5.13
graphics/py-gphoto2: Update to 1.6.0
- Bump dependent ports
Changes this release:
https://github.com/gphoto/libgphoto2/releases/tag/libgphoto2-2_5_13-release |
1.5.1_1
18 Apr 2017 18:26:19
|
miwi |
- Fix Shebangs |
1.5.1
28 Dec 2016 04:21:15
|
woodsb02 |
graphics/py-gphoto2: Update to 1.5.1
Changes this release:
https://github.com/jim-easterbrook/python-gphoto2/releases/tag/v1.5.1 |
1.5.0
31 Oct 2016 14:51:33
|
woodsb02 |
graphics/py-gphoto2: Update to 1.5.0
- Take maintainership
Approved by: adamw (mentor, implicit) |
1.2.0
20 Oct 2016 15:58:13
|
rakuco |
Reassign makc's ports back to the pool.
See "Maintainer Reset" in
https://www.freebsd.org/portmgr/policies_contributors.html. makc's last commit
was in March 31st (r412218), and his ports have been timing out since at least
July (r418155).
I also emailed him 2 weeks ago and have received no response so far. |
1.2.0
01 Apr 2016 14:00:57
|
mat |
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight |
1.2.0
13 Oct 2015 21:18:59
|
makc |
Add new port graphics/py-gphoto2:
Python bindings for libgphoto2.
WWW: http://pypi.python.org/pypi/gphoto2/ |
As an Amazon Associate I earn from qualifying purchases.