graphics/libpano13: update to 2.9.21

- revert unapproved changes from the 2.9.20 update
 - add new SUITESPARSE option
 - remove superseeded patches

Relevant upstream changes:

 - new optional suitesparse dependency for improved geometric
   optimisation speed
 - the test suite is now functional again
 - a lot of fixes for potential crashes and safer handling of data
 - fix for bigendian architectures
 - link with libm if necessary
 - various installation location and content fixes

Changelog:	https://sourceforge.net/projects/panotools/files/libpano13/libpano13-2.9.21/README.txt
PR:		260819
Submitted by:	fuz@fuz.su (maintainer)

graphics/libpano13: Add CPE information

Approved by:	portmgr (blanket)

graphics/libpano13: Update to 2.9.20

Submitter becomes maintainer
Upstream have confirmed unit tests to be broken so they're disabled
for now.

Changelog:
https://sourceforge.net/projects/panotools/files/libpano13/libpano13-2.9.20/

PR:		258354
Approved by:	tcberner
Differential Revision:	https://reviews.freebsd.org/D31925

*: return grog@'s ports to the pool after safekeeping his commit bit.

Remove # $FreeBSD$ from Makefiles.

Clean up after java/openjdk6 and java/openjdk6-jre removal

java/openjdk6 support was removed from Mk/bsd.java.mk (r512662) and
java/openjdk6 and java/openjdk6-jre were removed from the ports tree
(r512663).  Now this patch completely removes remaining stuff from the
ports tree.

PR:			241953 (exp-run)
Reviewed by:		glewis
Approved by:		portmgr (antoine)
Differential Revision:	https://reviews.freebsd.org/D22342

graphics: Add missing USES={gl,gnome,sdl}

graphics/libpano13: fix linking

This fixes the build errors:
[...]
ld: error:
/wrkdirs/usr/ports/graphics/libpano13/work/libpano13-2.9.19/.libs/libpano13.so:
undefined reference to ceil
ld: error:
/wrkdirs/usr/ports/graphics/libpano13/work/libpano13-2.9.19/.libs/libpano13.so:
undefined reference to atan
ld: error:
/wrkdirs/usr/ports/graphics/libpano13/work/libpano13-2.9.19/.libs/libpano13.so:
undefined reference to tan
[...]
by passing -lm to the linker flags for FreeBSD builds.

Cleanup LIB_DEPENDS on libpng

- Try to fix build on dragonfly

Approved by:	portmgr blanket

Use USES=pathfix where applicable.

PR:		213195
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D8093

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket

Convert to USES=jpeg

Reset PORTREVISION.

Approved by:	edwin@ (mentor)
MFC after:	2 weeks

Take MAINTAINER

Approved by: vd@

Update to 2.19.9

Approved by:	edwin@ (mentor)
MFC after:	2 weeks

Convert to USES=jpeg

Bump portrevision after png update

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

- Add LICENSE
- Properly OPTIONize java support

PR:		191787
Submitted by:	mazhe@alkumuna.eu
Approved by:	maintainer timeout (vd, 5 months)

Cleanup plist

Convert to USES=autoreconf and add INSTALL_TARGET=install-strip

- Switch to USES=libtool, drop .la files

Approved by:	portmgr blanket

Modernize LIB_DEPENDS, strip .so file after install in default build, support
staging.

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

Decommissioning java 1.5 (EOLed since October 2009):
suppress any reference to JAVA_VERSION=	1.5+ (part2)

- update png to 1.5.10

Update autoconf to 2.69 and automake to 1.12

PR:             166836
Tested by:      Multiple -exp runs (pav)

Upgrade graphics/libpano13 from 2.9.17 to 2.9.18.

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Now that the Java 1.3 and Java 1.4 ports are deprecated and will expire soon,
remove support for them from bsd.java.mk.  As Jikes is not available in Java 1.5
or higher, remove it from bsd.java.mk too (suggested by hq@) and from the ports
which used it (only occurences were USE_JIKES=no).  Support for the Blackdown VM
is also removed, as it is not available in Java 1.5 and higher.

Also remove the mapping from Java 1.1-1.4 to Java 1.5+ in bsd.java.mk to detect
old, broken ports; therefore bump the minimal value of JAVA_VERSION to 1.5.
While here, replace static values of JAVA_VERSION in files/*.in by
%%JAVA_VERSION%% .

PR:             ports/158969
Submitted by:   rene
Tested on:      pointyhat-west -exp

Fix compilation of graphics/libpano13 with libtool 2.4

Spotted by:     linimon@

Fix graphics/libpano13 pkg-plist

Install libpano13.pc in libdata/pkgconfig instead of lib/pkgconfig

pkg-config finds the .pc file in either location but I change it to be
consistent with the majority of FreeBSD ports. Also libdata/pkgconfig
does not need to be removed by the port itself upon deinstallation.

Feature safe:   yes

- Mark BROKEN: incomplete plist and installs .pc file to lib/ instead of
libdata/

Reported by:    pointyhat
Feature safe:   yes

Fix graphics/libpano13 pkg-plist

Pointed by:     pav@
Feature safe:   yes

Upgrade graphics/libpano13 from 2.9.14 to 2.9.17.

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

Round one migration of ports from automake{19,110} to automake111

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Switch SourceForge ports to the new File Release System: categories starting
with G

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

graphics/libpano13:

Fix plist for WITHOUT_JAVA case.

PR:             ports/136823
Submitted by:   Dmitry Marakasov <amdmi3@amdmi3.ru>

- update to jpeg7
Tested by:      pav on pointyhat

graphics/libpano13:

Fix build with custom LOCALBASE.

Reported by:    qat@

Upgrade graphics/libpano13 from 2.9.12 to 2.9.14.

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Add new port graphics/libpano13 - the successor of graphics/libpano12

This is the pano13 library, part of the Panorama Tools by Helmut
Dersch of the University of Applied Sciences Furtwangen.

The panorama tools are mainly used to build panoramic images from a set of
overlapping images. The usability extends beyond "just" building panoramas by
far though. You can, for instance, use them to render an average of multiple
images to broaden the dynamic range of the images or average out noise. You
can also build object movies with them, morph between images and much more.

WWW: http://panotools.sourceforge.net/