19:14 rezny 

Update Mesa to 17.0.3

* OpenGL 4.5 support for RadeonSI and recent Intel
* Use LLVM 4.0 by default, building with 3.9 is possible via MESA_LLVM_VER
* DRI3 remains enabled at compile time, but is now disabled at runtime for
  stock FreeBSD.  Set LIBGL_DRI3_ENABLE in the environment to enable DRI3.
  This extra check is added when compiling on stock FreeBSD, not DRM-next.
  This change was made to work around a problem in libEGL, which fails to
  fall back to using DRI2 when run on a system without DRI3 support.

Reviewed by:	jmd, mat
Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10250

 

16:57 rezny 

Update to 13.0.6

- Allow use of newer LLVM, i.e. llvm40, via MESA_LLVM_VER in make.conf [1]
- Disable use of LLVM on platforms where it's known not to be available [2]

PR:		[1] 217016, [2] 216944
Reported by:	[1] greenreaper@hotmail.com, [2] linimon
Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10183

 

14:55 rezny 

Update to 13.0.5

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D9781

 

13:31 rezny 

Update Mesa to 13.0.4

* Use LLVM 3.9
* OpenGL 4.4 support for recent Intel and ReadeonSI

PR:	214581
Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D9438

 

18:09 kwm 

Update Mesa to 11.2.2.

Future mesa version will drop the glx-tls configure switch. This is by
default disabled on !linux and when the configure switch is dropped
glx-tls will be enabled always. Add a blob explaining why, we can't
enable this on FreeBSD yet. We might need to backport some patches
until we can.

Obtained from:	graphics team development repo.

 

14:06 kwm 

Update Mesa to 11.1.2.

Switch to using llvm 3.7.

Obtained from:	graphics team development repo

 

11:30 kwm 

Update mesa to 11.0.8.

 * Depend on libelf on DragonFly
 * Rework the vdpau support code and enable vdpau for DragonFly, FreeBSD
   doesn't support it just yet.
 * Revert commit that removed support for non-render nodes. Neither
   FreeBSD nor DragonFly supports render nodes at this time.
 * Fix LDFLAGS to work with GCC5, which DragonFly uses by default.
 * Update Makefile.targets: ffast-math isn't used since 8.0.3, don't
   replace x86_64 with amd64 on Dragonfly. Drop obsolete python disable
   replace.

 

21:30 kwm 

Update mesa to 11.0.7.

 

08:25 kwm 

Update Mesa ports to 11.0.6.

Obtained from:	x11 team development repo.

 

21:04 kwm 

Update Mesa to 10.6.9.

* Unbreak build on powerpc and other !x86 archs by moving the
  --with-dri-drivers logic from dri/Makefile to the
  libGL/Makefile.common file. So the settings are applied to all mesa ports,
  this was missed in the 10.6.6 update. [1]
* Don't try to enable OpenCL support on anything other then i386 and amd64. [1]
* Move the texture-float and vdpau logic to Makefile.common even if the latter
  isn't supported yet. Keep OPTIONS_DEFINE/DEFAULT in dri/Makefile since they
  need to defined before bsd.port.options.mk is included, and they only affect
  the dri modules.
* Sed on 11 and 10 supports \< and \> however sed on 9.x and dragonfly do not,
  replace the sed keywords with some magic to get the intended results. [2]

Submitted by:		marino@ [2]
Reported and tested by:	arved@ (on ppc32)[1]

 

22:01 kwm 

Update Mesa 10.6.8.

 

18:07 kwm 

Update Mesa port to 10.6.6 and add Clover.
Add beignet 1.1.0.
Add clinfo, clblas, clfft and clrng.

The major change is that all Mesa ports are now configured the same way.
This fixes several problems and enables new features.  The details
are described in this blog post:
http://blogs.freebsdish.org/graphics/2015/03/18/unifying-mesa-ports-configure/

The second important change is the OpenCL support.  Mesa's
implementation, Clover, is enabled as well as Beignet.  Clover
targets all Gallium drivers, only Radeon GPUs in our case.  Beignet
is for Intel GPUs starting with Ivy Bridge.  Thanks to Johannes
Dieterich, O. Hartman, and Koop Mast for their work on OpenCL!  As a
bonus, there are several OpenCL-based math ports added (clblas,
clfft and clrng). For more information and known issues, please see
https://wiki.freebsd.org/Graphics/OpenCL

The third change is the removal of Mesa 9.1.7 which was installed on
FreeBSD 9.3-RELEASE.  There is now only one version of Mesa in the Ports
tree (10.6.6) for all supported versions of FreeBSD.

Other, smaller changes:

* Include libosmesa into the Mesa framework; this changes libOSMesa
  shlib version.

* bsd.mesalib.mk was renamed and split up in two files namely
  Makefile.common and Makefile.targets.  So ports can overwrite variables
  set by Makefile.common and are used by Makefile.targets.

* Some text in the pkg-descr files was wrong, clean it up.  While here,
  update the WWW to the main mesa3d.org upstream page.

* devel/clinfo was added, a glxinfo like program but for OpenCL.

Non-x86 hardware reports are very welcome since we changed the framework
quite a bit.

Obtained from:	Graphics team development repo.

 

21:42 kwm 

Update mesa ports to 10.4.6.

 

22:34 kwm 

Update the mesa ports to 10.4.5.

 

14:47 kwm 

Update Mesa to 10.4.4.

Switch to llvm 3.5 for the Mesa 10.x series to be inline with the current
OpenCL work. There are regressions in llvm 3.4.x regarding OpenCL.

Obtained from:	graphics team devel repo

 

01:03 kwm 

Update Mesa to 10.4.3.

Move LLVM version selection to bsd.mesalib.mk so the clover port can use it.
Clover isn't included yet because it is a work in progress and doesn't work
yet.

 

19:00 kwm 

Update mesa based ports to 10.4.0.

 

14:48 kwm 

Update to 10.3.4.

Enable TEXTURE option in dri by default [1]. This allows for OpenGL higher
  then 2.1 to be supported.
Make sure we depend on llvm at run time when gallium is enabled.
  The gallium based modules link to the llvm shared libraries. [2]

PR:		followup on 194655 [2]
Approved by:	core@ [1]
Obtained from:	xorg-dev repo

 

11:34 kwm 

Update mesa to 10.3.3.

graphics/dri:
Move gettext:build to bsd.mesalib.mk so it present for all mesa ports. [1]
VDPAU needs GALLIUM so check for that, since it a Gallium state tracker. [1][2]
Rework llvm33/llvm34 selection so we can use the llvm version later on.
VDPAU links against the llvm libraries so we need to depend on the llvm port
as a run dependency .[1]
After discussion remove the VDPAU option for now. Radeon kernel drivers
currently
don't support hardware-assisted video decoding. And Gallium/VDPAU doesn't
support
the intel driver.

PR:		194655 [1]
PR:		194580 [2]

 

20:39 kwm 

Update the "new" Mesa to 10.3.2.

Add code to select the correct MASTER_SITE.
Mesa version 10.3.0 -> distdir 10.3
Mesa version 10.3.2 -> distdir 10.3.2

Obtained from:	xorg-dev repo

 

09:53 kwm 

Update Mesa ports to new default of 9.1.7 and more recent version to 10.3.0.

The port will switch to the newer version if hw context is available in the
i915kms driver.

- Get ride of WITH_NEW_XORG.
- Use @comment in plist to ignore unwanted files in the stagedir, instead of
  trying to remove them in post-install.
- Bump portrevision of 9.1.7 due to dependency changes.
- Drop :keepla from USES=libtool.
- Drop @dirrm[try] from plists
- Give dri propper options, with pkg-help for additional information.
- Make separate plist for dri for the different versions, the combined plist
  was headache inducing.
- Add "workaround" patches to allow clang to build the dri port on i386 [1].
  USE_GCC is now only needed for 8.x.
- Add gbm port and USE_GL switch for it.

PR:		192286 [1]
Submitted by:	Carlos Jacobo Puga Medina [1]
Approved by:	portmgr (bapt@)
In collaberation with:	dumbbell@
Obtained from:	xorg-dev

 

20:58 kwm 

Update to 9.1.7.

Stagify, abuse stage dir and plist to only install files we want to install.
So we don't have to do complex do-install anymore, yay.

For the WITH_GALLIUM option we don't need llvm at run-time.

Obtained from:	xorg-dev repo

 

17:01 zeising 

The FreeBSD graphics/x11 team proudly presents
a kwm, zeising production:

MESA 9.1.6

Starring:
Mesa 9.1.6, including libGL, libGLU and dri (new xorg only)
Addition of libEGL and libglesv2
KMS support for ATI graphics cards in 10-current (new xorg only)
Improved sparc64 support for new xorg. [1]
pixman 0.30.2, including shlib bump and portrevision bumps
libX11 1.6.2
Make absolute pointing devices work with x11-drivers/xf86-input-mouse
x11-drivers/xf86-video-ati 7.2.0 for 10-current (KMS aware ati driver)

Also starring:
Updates to drivers and other libraries and utilities

Additional notes:
When updating MESA related ports (libGL, dri) you need to remove old versions
first.  See UPDATING for details.

PR:		ports/181962 [2]
Submitted by:	marius [1]
		zeising [2]
Exp-run by:	bdrewery
Approved by:	portmgr (bdrewery)

Thanks to all who helped testing!

 

14:37 zeising 

The FreeBSD x11 team proudly presents
an zeising, kwm, miwi, bapt, eadler production:

Xorg 7.7

Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities

Additional notes:
Change pkgconf to be a build dependency.
Add a new USE_XORG, xcb, to depend on libxcb and update all ports to use
this.
Trim makefile headers.
Take maintanership of x11/xcb-proto, ok'd by ashish.
If you are running WITH_NEW_XORG=, you need to rebuild all installed
drivers, see UPDATING for more information.
Various fixes to make ports compile.

PR:		ports/177942
Exp-run by:	miwi
Approved by:	portmgr (miwi)

Thanks to all who helped testing!

 

17:03 miwi 

- Please welcome Xorg 7.5.2

       The Xorg Team is pleased to announce the next round of Xorg updates.
       The team created a new flag called WITH_NEW_XORG that users can include
       in /etc/make.conf. This was created for the intel KMS work being done
       althouthough It probably works for other chips. Unfortunately, the intel
       KMS driver will only work on FreeBSD 9(RELENG|STABLE) or 10/HEAD users.
       Older version of FreeBSD will not be supported. Intel users will need
       to patch their source manually with Konstantin?s KMS kernel patch to get
       the newer chips to work. Please carefully read UPDATING entry.

Changes:

        - libdrm 2.4.31 (including KMS support)
        - mesa 7.11.2
        - xorg-server 1.10.6
        - a lot of new Graphic Drivers.

    I would like to thank:

         Koop Mast
         Eitan Adler
         Niclas Zeising
         and all helpers and testers from x11@.

14:12 ohauer 

-remove MD5

11:51 nork 

Limited Update to Mesa3D 7.6.1 and libdrm 2.4.17.

[MEMO]
In this commit, no version changed.  But if you put
'WITHOUT_NOUVEAU' on /etc/make.conf, you can use
new version of Mesa3D and libdrm.

Discussed with: rnoland on freebsd-ports/freebsd-x11.

01:15 rnoland 

Update to 7.4.4

16:05 rnoland 

Update to 7.4.3

This is a bug fix release.

13:15 rnoland 

Update to Mesa release 7.4.2

19:37 rnoland 

Update to 7.4.1

04:16 rnoland 

Update the Mesa ports to 7.4

PR:             133167
Submitted by:   Anonymous <swell.k@gmail.com>

18:13 rnoland 

Update mesa related ports to 7.3

Approved by:    garga (mentor, implicit)

16:28 flz 

- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).

15:05 flz 

Update Mesa libraries (GL, GLU and GLw) and dri to 7.0.3.

16:57 jkim 

Update to 7.0.1.

17:02 jkim 

- Update to 7.0.
- Use amd64-specific configuration file for amd64 build.  It gives slightly
better performance because it uses amd64 assembly code in some places.

Approved by:    x11 (no objection)

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.