graphics/jpeg-turbo: Update to 2.1.5.1

* Minor rearrangement of Makefile for better readbility
* Adjust port to not override cflags defined by framework

Changelog:
https://github.com/libjpeg-turbo/libjpeg-turbo/releases/tag/2.1.5.1

PR:		269449
Reviewed by:	desktop (tcberner)
Exp-run by:	antoine

Fix WWW in parent/child ports

Many of the WWW are overwritten later which means the wrong value
is used. This did not happen before where the children were either
 a) just using the pkg-descr from the parents
 b) or had their own separate pkg-descr with custom WWW

Use WWW?= in parents when the child's WWW is different.

Children that use the same WWW as the parent can just inherit it,
i.e., the child WWW can be removed.

Approved by:	portmgr (implicit)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

graphics/jpeg-turbo: Update to 2.1.4

Changelog: https://github.com/libjpeg-turbo/libjpeg-turbo/releases/tag/2.1.4

PR:		265890
Approved by:	portmgr (antoine)
Exp-run by:	antoine

graphics: Give ports maintained by portmgr to desktop@

These ports were traditionally maintained by portmgr@ to ensure
that they receive an exp-run.

Let's entrust them to desktop@ with a stern "remember to exp-run".

Approved by:		rene
Differential Revision: https://reviews.freebsd.org/D36316

graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>

graphics/jpeg-turbo: Update to 2.1.3

Changelog: https://github.com/libjpeg-turbo/libjpeg-turbo/releases/tag/2.1.3

PR:		262222
Approved by:	portmgr (antoine)
Exp-run by:	antoine

Fix CONFLICTS entries of multiple ports

There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.

This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.

Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port

*/*: Remove redundant '-[0-9]*' from CONFLICTS_INSTALL

The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").

Approved by: portmgr (blanket)

graphics/jpeg-turbo: enable runtime AltiVec detection

Enables runtime AltiVec detection, which will improve performance on powerpc,
where AltiVec is not enabled by default.

Approved by:	antoine
PR:	259562

graphics/jpeg-turbo: Disable SIMD instructions on ARMv6 platforms

libjpeg-turbo incorrectly assumes that SIMD instructions are
available on all ARM platforms

PR:		258685
Reported by:	Martin Birgmeier
Approved by:	antoine	(portmgr / maintainer)
Differential Revision:	https://reviews.freebsd.org/D32096

graphics/jpeg-turbo: Update to 2.1.1

Backport upstream commits:
129f0cb76346ceede8f4d8d87dea8acb0809056c
173900b1cabb027495ae530c71250bcedc9925d5

exp-run by antoine
Additional build tests on aarch64 by mikael

PR:		258336
Approved by:	arrowd
Differential Revision:	https://reviews.freebsd.org/D31988

Remove # $FreeBSD$ from Makefiles.

Update to 2.0.6

Update to 2.0.5

PR:		250190
MFH:		2020Q4

Update to 2.0.4

Update to 2.0.3

Update to 2.0.2

With hat:	portmgr

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

Update to 2.0.1

Update graphics/jpeg-turbo and graphics/libjpeg-turbo to 2.0.0
Upstream switched build system to CMake

PR:		230143
With hat:	portmgr

Update to 1.5.3

Update to 1.5.2

tjbench links against libjpeg.so

- Update jpeg-turbo to 1.5.1
- Add LICENSE
- Use the framework for tests

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Revert MAINTAINER update

These ports were intentionally set to portmgr@FreeBSD.org as MAINTAINER;
it was not a mistake. They require exp-runs and special care when
updating.

Submitted by:	antoine

MAINTAINER reset should be ports@FreeBSD.org, not portmgr

Update to 1.4.2

PR:		203634

- Update jpeg-turbo to 1.4.1 and grab maintainership after several timeouts
- Change default jpeg implementation from jpeg to jpeg-turbo

Reviewed by:		bapt, mat
Differential Revision:	https://reviews.freebsd.org/D2884

Fix negative shift with IFAST FDCT and qual=100
This fixes regression tests with clang 3.7.0

PR:		202762
Obtained
from:	https://github.com/libjpeg-turbo/libjpeg-turbo/commit/4cfa3f4c39c2e46eca3a65c67411d15e08a3fc70
Approved by:	maintainer timeout (15 days)

- Update to 1.4.0
- Allow building on non i386/amd64 [1]

PR:		200095
Approved by:	maintainer timeout (3 weeks)
Tested on:	ia64 and sparc64 [1]

Add CPE information

Fix possible Huffman local buffer overrun

MFH:		2015Q1
Security:	CVE-2014-9092

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

Cleanup plist

Fix a docs conflict from libjpeg-turbo not excluding the DOCS option.

PR:		193145
Submitted by:	Jan Beich

libjpeg-turbo installs its own unique library (libturbojpeg.so) and
a drop-in replacement for libjpeg.so.

This commit splits them apart into two ports:
	graphics/libjpeg-turbo which installs only libturbojpeg.so
	graphics/jpeg-turbo which installs the libjpeg.so replacement

This will allow ports to depend on libturbojpeg.so without causing
pkg conflicts.

Approved by:	maintainer