all: Bump PORTREVISION after Go update

Bump Go ports PORTREVISION after GO_DEFAULT and lang/go118 update.

graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>

all: Bump PORTREVISION after lang/go{117,118} update

graphics/poppler: bump PORTREVISION of poppler consumers

*/*: Bump port revisons after lang/go{117,118} update

graphics/poppler: bump port revision of consumers after 22.06 upgrade

graphics/poppler: bump portrevision of consumers

graphics/poppler: bump portrevision of consumers

Bump revisions after 0ee787592d5a due to so-version bump.

PR:		 263009

graphics/poppler: bump consumers

Bump consumers of graphics/poppler after
e25859e09380f5930718094423dc8616cbb202b3

graphics/graphviz: fix option POPPLER

graphics/graphviz: update to 2.50.0

Fix CONFLICTS entries of multiple ports

There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.

This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.

Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port

graphics/poppler: update to 21.12

Release 21.12.0:
    core:
         * Add API to add images
         * CairoOutputDev: Fix de-duping of Flate images
         * Fix crash on broken files when using non-default
ENABLE_ZLIB_UNCOMPRESS. Issue #393
         * Minor code improvements

    glib:
         * Add API for validation of signatures
         * Add API to read/save to file descriptor

    utils:
         * pdftohtml: Reduce sensitivity of duplicate detection. Issue #1117

    build system:
         * Increase C++ standard to 17

Exp-run by:	antoine
PR:		260344

Bump PORTREVISION of graphics/poppler consumers.

PR:		259656

graphics/poppler: bump consumers after 2dee0997fbc9ee01991f73f0fa55f9b18908a264

poppler: bump revisions of users

Bump the remaining users of poppler after
d98b56f1deb5b6a03a7e04fc16192ecb2af9df1e

PR:		258206

graphics/poppler: update to 21.08.0

Release 21.08.0:
        core:
         * Add API to allow addition and modification of outlines into a PDF
         * Use additional samples to test for constant parts of an axial
gradient
         * forms: Create fallback fonts for some well known font names
         * Support reading the PDF Version from the Catalog
         * Fix XRef::copy when there are modified objects
         * Take into account that Date string may be in unicode
         * JBIG2Stream: Fix regression in "Do not consider a size-0 to be an
error"
         * Replace a local bubble sort implementation by std::sort
         * Fix issues with malformed files

        build system:

graphics/poppler: update to 21.07.0

Release 21.07.0:
        core:
         * JBIG2Stream: Do not consider a size-0 to be an error. Issue #535
         * PSOutputDev: fix off-by-one error for image masking in L1/L2 output.
Issue #1088
         * CairoOutputDev: Fix memory leak on broken files
         * Minor code improvements

        build system:
         * set C standard to 11 without extensions

Exp-run by:	antoine
PR:		256981

graphics/poppler: update to 21.06.0

Release 21.06.0:
        core:
         * Fix rendering of some extended latin1 characters in annotations.
Issue #1070
         * Support some not so well formed documents with password. Issue #1083
         * Add API to get notified if the xref is reconstructed
         * Add somewhat fancier left/right signature visual representation
         * Fix crashes in malformed files
         * Minor code improvements

        qt6:
         * Change some functions to return std::unique_ptr

        qt5/qt6:

graphics/poppler: update to 21.05.0

Release 21.05.0:
        core:
         * Fix crashes in malformed files
         * Export SplashFont* symbols used by Scribus
         * Minor code improvements

        qt5/qt6:
         * Make sure new signatures are always properly oriented
         * Allow to pass the border width when signing

        glib:
         * Enhance find to support multi-line matching

        utils:
         * pdftoppm: Fix regression when using single scaleTo. Issue #1062

        build system:
         * Allow to disable building manual tests

PR:		255562
Exp-run by:	antoine

Prepare removal for libgnomeui

Remove the GNOME option for all ports depending on libgnomeui

graphics/poppler: update to 21.04.0

Release 21.04.0:
        core:
         * Hide symbols by default
         * TextSelectionDumper: fix word order for RTL text
         * Fix rendering of text in some files. Issue #1052
         * Implement rendering of Masks of Image subtype. Issue #1058
         * Forms: fix unclicking standalone form buttons. Issue #1034

        glib:
         * Expose more fields from MediaRendition in PopplerMedia
         * Use stock glib macro to define boxed type
         * Remove incorrecly used volatile from enum type registration code

Remove # $FreeBSD$ from Makefiles.

graphics/poppler: update to 21.03.0

Release 21.03.0:
        core:
         * Fix parsing text in some broken pdf files. Issue #1040
         * Fix memory issue when using threads. Issue #1050
         * TextSelectionDumper: Fix getText() for space after word
         * Change signature of OutputDev:tilingPatternFill
         * Make PDFDocBuilder return a std::unique_ptr
         * Improve well formed check for shading functions
         * Fix leak in case of fread failing
         * Fix memory leak in broken file in JBIG2Stream::readGenericBitmap
         * PSOutputDev: Fix stack overflow in broken files

        glib:

graphics/poppler: update to 21.02

Release 21.02.0:
        core:
         * GfxCal*ColorSpace: introduce Bradford transform for chromatic
adaptation
         * Fix memory leak if saving the file fails
         * Internal code improvements
         * Fix various issues handling broken files
         * Make checkedAdd work for long long in MSVC

        qt5:
         * Properly export NewSignatureData class
         * Fix regression in QIODeviceOutStream + MSVC

        qt6:
         * Properly export NewSignatureData class
         * Fix regression in QIODeviceOutStream + MSVC

        utils:
         * pdftohtml: Fix error() parameter type

PR:		253183
Exp-run by:	antoine

Allow building on RISC-V, which also does not have sbrk.

This patch should probably be upstreamed.

Tested on: amd64, riscv64 (via qemu)

Approved by:	portmgr (tier-2 blanket)

graphics/poppler: update to 21.01.0

Release 21.01.0:
        core:
         * Faster routines for jpeg decoding
         * Fix reading signatures in encrypted files
         * Add white point correction when lcms is used
         * JBIG2Stream: Fix byte counting
         * Fix potential data loss if we try to fetch a non existing Ref after
modifying the document
         * Specifically use DeviceGray instead of DefaultGray for softmasks
         * Fix various issues handling broken files

        utils:
         * pdftocairo: Setmode binary for windows
         * pdfsig: Add hability to digitally sign files

graphics/poppler: update to 20.12.0

Changelog:
        core:
         * Draw better circles for circle annotations
         * Fix annotation line width if no appearance stream or style are given
         * Tweak rendering of highlight annotations
         * Fix border rendering of some annotations
         * Fix rendering of some files. Issue #976 Issue #567
         * PSOutputDev: provide options to set the rasterization color space and
ICC profile
         * PSOutputDev: for splashModeCMYK8 and language level >=2 activate
overprint emulation
         * PSOutputDev: use the DeviceN8 bitmap for rasterization with
CMYK-output + overprint
         * Use the font name without subset tag when querying for a system font
         * Splash: Fix wrong x adjustment during clipping
         * Splash: Fix blitImage in uncolored tiling patterns

graphics/poppler: update to 20.11.0

Release 20.11.0:
        core:
         * More work on rendering of standalone Annot Widgets. Issue #806
         * Fix crashes in embedded file handling on broken files. Issue #967
         * Fix uninitialized memory read on broken files
         * Save a bit of memory in Dict data

        cpp:
         * Fix crashes in embedded file handling on broken files. Issue #966

        utils:
         * pdftohtml: HTML and XML output includes font opacity.

graphics/poppler: update to 20.10.0

Release 20.10.0:
        core:
         * Filter out repeated forms
         * Implement EmbedStream::reset()
         * CairoOutputDev: evict just font faces owned solely by cache.
         * Splash: Rename Yd to Ydown, Xu to Xup, etc.
         * Splash: fix crash in out-of-memory situation.
         * Fix some undefined behaviour situation with forged files

PR:		250052
Exp-run by:	antoine

graphics/poppler: update to 20.09.0

Release 20.09.0:
        core:
         * Compability fix for Forms
         * Fix fetching of Objects failing in some cases
         * Fix clearing date in Annot setModified/setDate
         * TextSelectionPainter: support glyphless fonts
         * Splash: Don't try read past end of image
         * avoid abort() on large memory allocation
         * Fix memory leak on broken files
         * Fix potential invalid memory read
         * Small code improvements

        qt5:

Bump revisions of poppler consumers after r544863

- update to 2.44.1

graphics/graphviz: switch to clang on powerpc64, if available

LLVM bug is already fixed.

graphics/poppler: update to 0.90

Release 0.90.0:
        core:
         * Color profile tweaks
         * Small signature improvements
         * BBoxOutputDev: Fix calculation when type3 fonts are involved
         * Fix potential crash when reading Forms
         * Fix infinite loop in broken file
        glib:
         * Fix adding annots in rotated pages
         * Add ability to reset forms
         * Several fixes to the documentation
        qt5:
         * Make it clear we require Qt 5.5

Move devel/swig30 to devel/swig and update to 4.0.1

- Do not silence installation message
- Update dependent ports:
  - Fix build with swig 4.0.1
  - Update *_DEPENDS
  - Remove BINARY_ALIAS

Changes:	http://www.swig.org/news.php
PR:		246613
Exp-run by:	antoine

graphics/poppler: update to 0.89.0

Release 0.89.0:
        core:
         * Add support for ResetForm action. Issue #225
         * Fix crash in PDFDoc::getSignatureFields when there's no Forms at all
         * Fix exporting to PS of some files with CID fonts
         * Use ICC profiles in PS output (if new enough lcms is used)
         * Allow almost-singular tiling pattern matrices. Issue #894
         * Fix memory leak when failing to load some fonts
         * CairoOutputDev: Use stroke opacity when clipping to a stroke path
         * CairoOutputDev: Fix tiling patterns when pattern cell is too far.
Issue #190

        glib:
         * Add poppler_movie_get_aspect

        cpp:
         * Add the font infos to the text_box object

Exp-run by:	antoine
PR:		246848

- depend on groff only when needed
Suggested by:	Renato Botelho

- update libgd to 2.3.0
- new option RAQM
- resurrect deprecated gdlib-config
- bump dependend ports

graphics/poppler: update to 0.88.0

Release 0.88.0:

        core:
         * Support Widget Annotation Buttons not linked to any Form
         * SplashOuputDev: Use stroking opacity when clipping to a stroke path
         * Handle 1 bit RGB images in ICC colorspace
         * Internal code improvements

        qt5:
         * Add Document::signatures. Returns signatures not attached to any page
         * ArthurOutputDev: Fix font hinting
         * ArthurOutputDev: Set the opacity when filling with axial gradients
         * ArthurOutputDev: Implement the clipToStrokePath method

graphics/graphviz: fix build on powerpc64 elfv2

Clang 10 SIGILL's during compilation of this port after upgrade to 2.44.0.
Switch to GCC for the time being while this issue is being investigated.

- update to 2.44.0

- update to 2.42.4

graphics/poppler: update to 0.87.0

Release 0.87.0:
        core:
         * Fix crashes due to inconsistent vtables for Clang builds
         * Fix leak in broken files
         * Internal code improvements

        qt5:
         * Add option to get form choice for export value
         * ArthurOutputDev: Avoid division by zero in updateLineDash. Issue #695

        glib:
         * Internal code improvements

         utils:
         * pdftohtml: Fix memory leak in HtmlOutputDev::getLinkDest

PR:		245150
Exp-run by:	antoine

Update poppler to 0.86.1

Release 0.86.1:
        core:
         * Fix regression in Browse Link handling
         * Internal code improvements

Release 0.86.0:
        core:
         * Fix link content exfiltration attack
         * Splash: Implement gouraudTriangleShadedFill for some non parametrized
shadings. Issue #881
         * Fix case unsensitive search for Old Hungarian, Warang Citi,
Medefaidrin and Adlam
         * Internal code improvements

        glib:

- update to 2.42.3
- update MASTER_SITES

Bump revision of poppler dependencies

- poppler was updated in r525051, bump revisions

graphics/poppler: update to 0.84.0

Release 0.84.0:
        core:
         * Fix crash when converting from Unicode to ASCII-7
         * Splash::scaleImageYdXu: Protect against crash if srcWidth is too big
         * JBIG2Stream: fix potential crash in malformed documents
         * JBIG2Stream: fix leak in reset() if called several times
         * Internal code improvements

        utils:
         * pdfimages: Add error message if first page is larger then number of
pages.
         * pdfinfo: Improved paper size recognition
         * pdfsig: Fix exit code when dumping signatures
         * pdftocairo: Error out when even/odd selects 0 pages

- update to 3.1

Add USES=xorg USES=gl, ports categories e and g

Add USES=xorg and USES=gl to ports in categories starting with 'e' and 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

graphics/poppler: update to 0.82.0

Release 0.82.0:
        core:
         * Fix not being able to open some files. Issue #832
         * Fix crashes in malformed files
         * Fix memory leak on broken files
         * Minor performance improvements
         * Minor code improvements

        glib:
         * Add poppler_document_new_from_bytes
         * PopplerAttachment: Silence deprecation warnings for ctime/mtime

        build system:
         * pdf-inspector: Support builddir != srcdir
         * Install Cairo* headers if Cairo has been found

Thanks to adridg@ for fixing all the fallout.

Exp-run by:	antoine
PR:		241532
Approved by:	gnome (kwm, implicit)

- new option GO
- fix option PYTHON
PR:		241123

-fix for aarch64
PR:	241073

- mark BROKEN for arm64 and aarch64

- add more dependecies

graphics/graphviz: Remove depenendy on libXp

Remove dependency on libXp, it is not needed and libXp is getting
deprecated.

PR:	240834
OK by:	bapt (just fix it)

- update to 2.42.2
- change MASTER_SITES
- add webp support
- use automake
- sort plist

Update Guile to version 2.2.5, modern stable version, and fix dependent
ports to build against it.  Most changes are rather minor and mechanical
except for the devel/gdb (obtained via their bugtracker [1], courtesy of
Doug Evans).  One port (science/meep) I had to mark BROKEN after fixing
it proved to be very tedious and actually unreliable.  It is very old,
there are newer versions available so it should be fixed by updating.

One port (devel/libruin) had revealed a bug in the new Guile code (an
auxiliary script, really) that had to be worked-round; reference to the
problematic upstream commit is provided in the patch.

PR:		229613
Exp-run by:	antoine

[1] https://sourceware.org/bugzilla/show_bug.cgi?id=21104#c8

graphics/poppler: update to 0.77.0

Release 0.77.0:
        core:
         * Fix crash on signature handling. Issue #766
         * Fix small memory leak in SignatureHandler::getCertificateInfo
         * Splash: Restrict filling of overlapping boxes. Issue #750
         * Fix crash on malformed files

        qt5:
         * Fix optional content handling with exclusive layers

        cpp:
         * Make render_page thread-safe

        utils:
         * pdfsig: Fix small memory leak
         * pdftotext: Fix typo in manpage

PR:		238115
Exp-run by:	antoine
Approved by:	gnome (kwm, implicit)

graphics/poppler: update to 0.76.1

From Changelog at https://poppler.freedesktop.org/releases.html :

Release 0.76.1:
        core:
         * Make the mul tables be calculated at compile time with constexpr.
         * splash: Fix compile with SPLASH_CMYK enabled
         * Some typo fixing in error messages

        qt5:
         * Fix regression in annotation handling

        build system:
         * Fix some typos in build system output and comments

- fix bug from r496028
PR:		236606

graphics/graphviz: remove GVEDIT option (Qt4 deprecation)

Approved by:	portmgr (implicit)

- order USES

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Mark QT4 ports/functionality for removal on 2019-03-15

While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.

Submitted by:	tcberner
Reviewed by:	adridg, jhale, rene, tcberner
Approved by:	portmgr (implicit, flavor hook)
Differential Revision:	https://reviews.freebsd.org/D17741

Remove compatibility code for FreeBSD < 11.2 from all ports.

Simplify some ports where DragonFlyBSD no longer needs to be special-cased.
Submitted by:	rene
Reviewed by:	bapt, jbeich
Differential Revision:	https://reviews.freebsd.org/D17724

Avoid accidentally auto-activating librsvg2 support in graphics/graphviz

Fix packaging

Reported by:	pkg-fallout

Remove LIBRSVG2 option, it creates a dependency loop.

It is also discouraged upstream, graphviz can create svg without it.

Fix build on gcc-based archs by updating USES.

Tested on powerpc64 and amd64 (for no regression).

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

- update MASTER_SITES
PR:		231336

devel/boehm-gc: update to 7.6.8

ChangeLog: https://github.com/ivmai/bdwgc/releases/tag/v7.6.8

* Giving maintainership to yasu@utahime.org
* Bumping PORTREVISION for dependent ports

PR:	230577
Submitted by:	yasu@utahime.org
Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D16704

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

Bump PORTREVISION due upgrade of devel/boehm-gc to 7.6.6

PR:		228597
Approved by:	portmgr (antoine)

- Switch to USES=localbase
- Always check OPSYS along with OSVERSION

Approved by:	portmgr blanket

Bump PORTREVISION due upgrade of devel/boehm-gc to 7.6.4

PR:		225560
Submitted by:	Yasuhiro KIMURA <yasu@utahime@org>
Reviewed by:	cpm
Approved by:	portmgr (antoine)

- add depedency groff

For ports that are explicitly enabled on armv6, also enable them
on armv7.  This has not been tested with an -exp run but should
"do no harm".

PR:		221894 (partial)

- fix build on armv6
PR:		220591
Submitted by:	Mikael Urankar

- support build with php5.6
PR:		220293
Submitted by:	Dmitry Marakasov

- use more OPTION_VARS

- switch some conditions to options helpers
- allow build with php7.1
PR:		220293
Submitted by:	Dmitry Marakasov

- use OPTION_VARS= SHEBANG_FILES+=
- extend SHEBANG_FILES for modgraph.py
- fix PYTHON_LDFLAGS
- remove tcl workaround
PR:		219511
Submitted by:	John Hein

- extend SHEBANG_FILES for modgraph.pl

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

Ports should not force the php version they use.

Sponsored by:	Absolight

- Fix typos in option descriptions

Approved by:	portmgr blanket

- use *_IMPLIES
PR:		216791
Submitted by:	Tobias Kortkamp

- make portlint happier

- update to 2.40.1
- add LICENSE

- use egrep for portability
PR:		215089
Submitted by:	Raphael Kubo da Costa

- enable sparc64

- fix build on aarch64
PR:		213864
Submitted by:	Andrew Turner

- use ONLY_FOR_ARCHS
PR:		213864

- disable build on arm
PR:		213864

- fix path to vimdot
Submitted by:	Jonathan Anderson

Most commonly used build systems support silent builds, when they
hide actual commands executed and only show short summary line (like
"CC foo.c"). CMake and ninja enable this by default, some autotools
using ports do as well. This is unacceptable because we need complete
build logs at any time, so we now switch to verbose build logs
unconditionally. Note that this change deliberately affects ALL
builds and not only package builds on cluster, because we need to
be sure that user experiencing failure can always provide informative
build log regardless of settings and without rerunning the build.

Change summary:

- Always do verbose builds for cmake, ninja and GNU configure (the
  latter includes check if --disable-silent-rules is actually supported
  by the configure script; there are isolated cases when it's not true)

- update libgd to 2.2.2
- new MASTER_SITES
- add security patch
PR:		210913
Submitted by:	Piotr Kubaj
MFH:		2016Q3
Security: CVE-2015-8874
Security: CVE-2016-3074
Security: http://www.openwall.com/lists/oss-security/2016/07/12/4

Convert USE_PHP*=yes into USES=php*

PR:		210529
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D6936

Remove NLS, DOCS, EXAMPLES and IPV6 from OPTIONS_DEFAULT, they are enabled by
default anyway and don't need to be listed

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)