09:56 Baptiste Daroussin (bapt) 

graphics/gltt: remove abandonware

    e94c259

18:53 Kevin Bowling (kbowling) 

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

    da3162c

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

22:16 zeising 

Add USES=xorg USES=gl, ports categories g

Add USES=xorg and USES=gl to ports in categories starting with 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

 

05:03 rezny 

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

14:58 amdmi3 

- Strip library

 

15:45 tijl 

print/freetype:
- Remove old libtool patch
- Remove :oldver from USES=libtool and bump dependent ports

 

19:31 tijl 

Remove old libtool patch and add INSTALL_TARGET=install-strip

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

14:50 tijl 

Support LIBS like LDFLAGS.

- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS.  Also remove references to
  PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
  required additional patches.

Somewhat simplified a linker command line looks like:

${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}

where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us.  If possible -L and -l flags need to be
added to LIBS to make sure they appear after any -L and -l flags set by
upstream.  Many ports currently add -L${LOCALBASE}/lib to LDFLAGS but this
may appear too early on the command line causing installed libraries to
be linked in instead of freshly built ones.

Additional changes:
benchmarks/netio: Replace WITH_IPV6 with an IPV6 option.
comms/gnokii: Replace some patches with USES=pathfix.  Also remove -fPIC.
graphics/gimageview: USES=libtool and install desktop file in DESKTOPDIR.
graphics/visionworkbench: Remove FreeBSD 7 support.
multimedia/libmovtar: New LIB_DEPENDS syntax.
multimedia/opencinematools: Use standard do-build.
net/siproxd: USES=libtool:keepla (port actually needs .la files for plugins)
net-mgmt/nagios: Remove -fPIC.
net-mgmt/nagios4: Remove -fPIC.
print/cups-base: Only add -lssp_nonshared on i386 and OSVERSION < 1000036.
security/p11-kit: Replace PTHREAD_LIBS in CONFIGURE_ENV with
ac_cv_func_pthread_mutexattr_init=no in CONFIGURE_ARGS.  This skips a test
in configure that falsely detects pthread_mutexattr_init in our libc.
sysutils/dar: Fix iconv detection.
x11/rxvt-unicode: Remove -lstdc++ and patch configure to remove a FreeBSD
hack and use $CXX as linker as on other platforms.

PR:		190592
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

18:25 amdmi3 

- Switch to USES=libtool, drop .la files
- Strip libraries

 

18:28 zeising 

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)

 

20:24 antoine 

Stage support

 

18:35 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

 

09:23 bapt 

In preparation of the removal of USE_FREETYPE from bsd.port.mk: remove
USE_FREETYPE from all ports using it

While here trim some headers, and do some conversion to new options framework.

 

22:52 kwm 

Switch from libglut to freeglut and retire libglut. Libglut hasn't been
developed in years and has been dropped from the MESA 8.0 distribution.
Freeglut is a rewrite of glut and is actively developed and is used by
many linux distributions instead of libglut.

Bump all ports that directly depend on libglut because of the shlib version
change.

There are some extra items in this patch.

*) Because freeglut doesn't have the same dependancies as libglut, some ports
	need extra dependencies added to USE_XORG to make them build.
*) Mark graphics/f90gl broken, f90gl depends on a header that is only shipped
	with libglut.
*) Remove option for libglut/freeglut selection in games/cake, only freeglut
	remains now.
*) While here fix a png related build issue games/vegastrike.

Thanks to miwi for running the exp-run.

Approved by:	portmgr (miwi)

Collaboration with:	zeising@
Obtained from:	xorg-dev staging area.

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

07:34 ade 

Sync to new bsd.autotools.mk

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

16:28 flz 

- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).

06:18 rafan 

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)

17:56 miwi 

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

14:56 miwi 

- Fix build with gcc 4.2

PR:             118084
Submitted by:   Pietro Cerutti <gahr@gahr.ch>
Approved by:    portmgr (pav)

02:41 kris 

BROKEN with gcc 4.2

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

02:42 kris 

Use libtool port instead of included version to avoid objformat a.out botch

23:06 clsung 

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include dns/ editors/ emulators/ finance/
  games/ graphics/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

04:28 linimon 

Reset bouncing maintainer address ip@doom.homeunix.org.  We hope to see him
back soon.

Hat:            portmgr

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

12:54 sem 

- Update graphics/libglut to 6.4.1.
- Shared lib version and PORTREVISION bumb for all affected ports.

While I'm here:
- Remove USE_MESA knob where it was (35 ports).
  It marked as depricated for 2 years.

PR:             ports/90247
Submitted by:   Ermal Lu?i <eri--@albabsd.org>

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

03:26 obrien 

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

08:04 obrien 

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

17:47 krion 

Change maintainer's email.

17:43 marcus 

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

05:21 marcus 

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

08:15 krion 

- Give maintainership to Igor Pokrovsky <tiamat@comset.net>

PR:             61813 61814 61815 61816 61817 61818 61819
Submitted by:   Igor Pokrovsky <tiamat@comset.net>

16:55 krion 

- Support CFLAGS/CXXFLAGS properly
- Do not install useless .la file

PR:             55623
Submitted by:   Ports Fury

06:27 kris 

Reset bouncing maintainer address.

Submitted by:   Mark Linimon <linimon@lonesome.com>

04:33 lioux 

New port gltt version 2.5.2: TrueType fonts rendering using OpenGL

PR:             41601
Submitted by:    Igor Pokrovsky <tiamat@telegraph.spb.ru>