| Port details |
- filmulator Simplified raw editor with the power of film
- 0.11.1_3 graphics
 =0      0.11.1_3Version of this port present on the latest quarterly branch. - Maintainer: danfe@FreeBSD.org
- Port Added: 2021-12-21 10:33:05
- Last Update: 2023-08-12 01:37:45
- Commit Hash: 8b5437d
- License: GPLv3+
- WWW:
- https://filmulator.org/
- Description:
- Filmulator is a raw photo editing application with library management
focusing on:
- Simplicity over flexibility
- Ease of learning
- Streamlined workflow
Filmulator accepts raw files from cameras and simulates the development
of film as if exposed to the same light as the camera's sensor.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- filmulator>0:graphics/filmulator
- To install the port:
- cd /usr/ports/graphics/filmulator/ && make install clean
- To add the package, run one of these commands:
- pkg install graphics/filmulator
- pkg install filmulator
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: filmulator
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1614922064
SHA256 (CarVac-filmulator-gui-v0.11.1_GH0.tar.gz) = 29a802e8f3c2beeb8b5b051780a1cdf643a3c1b15450afe0cab3159be7bc4421
SIZE (CarVac-filmulator-gui-v0.11.1_GH0.tar.gz) = 37539342
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- cmake : devel/cmake-core
- ninja : devel/ninja
- pkgconf>=1.3.0_1 : devel/pkgconf
- qt5-buildtools>=5.15 : devel/qt5-buildtools
- qt5-qmake>=5.15 : devel/qt5-qmake
- Library dependencies:
-
- libcurl.so : ftp/curl
- libexiv2.so : graphics/exiv2
- liblensfun.so : graphics/lensfun
- libraw_r.so : graphics/libraw
- librtprocess.so : graphics/librtprocess
- libtiff.so : graphics/tiff
- libjpeg.so : graphics/jpeg-turbo
- libarchive.so.13 : archivers/libarchive
- libQt5Core.so : devel/qt5-core
- libQt5Qml.so : x11-toolkits/qt5-declarative
- libQt5Gui.so : x11-toolkits/qt5-gui
- libQt5Network.so : net/qt5-network
- libQt5Sql.so : databases/qt5-sql
- libQt5Widgets.so : x11-toolkits/qt5-widgets
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- graphics_filmulator
- USES:
- cmake jpeg libarchive pkgconfig qt:5
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
0.11.1_3
12 Aug 2023 01:37:45
 |
Piotr Kubaj (pkubaj) |
graphics/filmulator: unbreak without libomp |
0.11.1_3
28 Jul 2023 17:13:17
|
Daniel Engberg (diizzy) |
*/*: Bump jpeg-turbo users treewide
New major version 3.0.0 |
0.11.1_2
09 Jul 2023 22:08:06
|
Matthias Andree (mandree) |
graphics/filmulator: make compatible with exiv2 0.28
PR: 272311 |
0.11.1_1
02 Mar 2023 17:59:13
|
Jason E. Hale (jhale) |
graphics/libraw: Update to 0.21.1
Bump PORTREVISION on dependent ports due to shared library increase.
Add several fixes for compatability.
https://www.libraw.org/news/libraw-0-21-release
https://www.libraw.org/news/libraw-0-21-1-release |
0.11.1
11 Sep 2022 10:20:14
|
Felix Palmen (zirias) |
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349 |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.11.1
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
0.11.1
04 Aug 2022 07:41:22
|
Yuri Victorovich (yuri) |
graphics/filmulator: Broken on systems where OpenMP isn't enabled
Reported by: fallout |
0.11.1
20 Jul 2022 14:22:04
|
Tobias C. Berner (tcberner) |
graphics: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Abel Chow <ozsanh45vds001@sneakemail.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Ade Lovett <ade@lovett.com>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Hayward <xelah@xelah.com>
* Alex Ivasyuv <siegerstein@pochta.ru>
* Alex Samorukov <samm@os2.kiev.ua> (Only the first 15 lines of the commit message are shown above ) |
0.11.1
21 Dec 2021 10:28:56
|
Alexey Dokuchaev (danfe) |
graphics/filmulator: new port had been added (+)
Filmulator is a raw photo editing application with library management,
it accepts raw files from cameras and simulates the development of film
as if exposed to the same light as the camera's sensor.
WWW: https://filmulator.org/ |
As an Amazon Associate I earn from qualifying purchases.