| non port: graphics/exrtools/Makefile |
|
SVNWeb
|
Number of commits found: 67 |
|
Sun, 10 Sep 2023
|
[ 11:44 Matthias Andree (mandree)  ]    1b44533 (Only the first 10 of 46 ports in this commit are shown above.  )
*: Bump PORTREVISION for OpenEXR users
Because OpenEXR's SONAME has changed with the 3.2.0 update.
New SONAME: libOpenEXR-3_2.so.31
|
|
Fri, 28 Jul 2023
|
[ 17:13 Daniel Engberg (diizzy) ] 664a2fa (Only the first 10 of 502 ports in this commit are shown above. )
*/*: Bump jpeg-turbo users treewide
New major version 3.0.0
|
|
Fri, 2 Jun 2023
|
[ 21:40 Matthias Andree (mandree) ] a5fbd2f (Only the first 10 of 49 ports in this commit are shown above. )
*: bump PORTREVISION of Imath users
...because math/Imath 3.1.9 reset the major version of
libImath to 29 from 31. See math/Imath 3.1.9 for details.
|
|
Sun, 28 May 2023
|
[ 18:39 Matthias Andree (mandree) ] e434b50 (Only the first 10 of 42 ports in this commit are shown above. )
*: Bump revision of ports using math/Imath
...after its major revision update.
|
|
Sat, 4 Mar 2023
|
[ 10:41 Matthias Andree (mandree) ] 5327591 (Only the first 10 of 50 ports in this commit are shown above. )
*: Bump PORTREVISION of math/Imath users
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 022e658 (Only the first 10 of 771 ports in this commit are shown above. )
graphics: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Abel Chow <ozsanh45vds001@sneakemail.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Ade Lovett <ade@lovett.com>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Hayward <xelah@xelah.com>
* Alex Ivasyuv <siegerstein@pochta.ru>
* Alex Samorukov <samm@os2.kiev.ua> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 3 Aug 2021
|
[ 18:19 Matthias Andree (mandree) ] 56ffa08 (Only the first 10 of 44 ports in this commit are shown above. )
*: graphics/openexr PORTREVISION bumps
OpenEXR changes its SONAME again, so bump PORTREVISION of its users.
|
|
Sat, 17 Jul 2021
|
[ 09:17 Matthias Andree (mandree) ] 3cda93b (Only the first 10 of 31 ports in this commit are shown above. )
*: bump PORTREVISION after math/Imath update
|
|
Sat, 3 Jul 2021
|
[ 05:15 Matthias Andree (mandree) ] 4030a14 (Only the first 10 of 40 ports in this commit are shown above. )
*: Bump PORTREVISION for openexr update
OpenEXR's patchlevel updated bumped the major version
of the OpenEXR library, hence bump PORTREVISION of all
ports that require OpenEXR.
|
|
Tue, 18 May 2021
|
[ 17:15 Matthias Andree (mandree) ] 1d5b7c9 (Only the first 10 of 39 ports in this commit are shown above. )
Bump portrevisions of openexr and Imath users.
|
|
Mon, 12 Apr 2021
|
[ 00:33 Matthias Andree (mandree) ] 73ab07c (Only the first 10 of 16 ports in this commit are shown above. )
chase library renames for OpenEXR/Imath 3.0
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sat, 13 Feb 2021
|
[ 11:08 mandree ]   (Only the first 10 of 45 ports in this commit are shown above. )
graphics/openexr, ilmbase: security update to v2.5.5
https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.5.5
"Specific OSS-fuzz issues include:
OSS-fuzz #30291 Timeout in openexr_exrcheck_fuzzer
OSS-fuzz #29106 Heap-buffer-overflow in Imf_2_5::FastHufDecoder::decode
OSS-fuzz #28971 Undefined-shift in Imf_2_5::cachePadding
OSS-fuzz #29829 Integer-overflow in
Imf_2_5::DwaCompressor::initializeBuffers
OSS-fuzz #30121 Out-of-memory in openexr_exrcheck_fuzzer"
Bump PORTREVISION of ports that directly depend on openexr and/or ilmbase.
MFH: 2021Q1
Security: 98044aba-6d72-11eb-aed7-1b1b8a70cc8b
|
|
Sun, 3 Jan 2021
|
[ 16:57 mandree ] (Only the first 10 of 38 ports in this commit are shown above. )
graphics/openexr: really commit v2.5.4 update.
Unfortunately, this was missed with the ilmbase update, and
causes yet another PORTREVISION bump on all dependent ports.
repeating ilmbase's commit log here:
"Patch release with various bug/sanitizer/security fixes, primarily related to
reading corrupted input files."
<https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.5.4>
Cherry-pick upstream commit for GCC 11 compatibility:
<https://github.com/AcademySoftwareFoundation/openexr/commit/a40a6151c4e746eb8f93c7c06992d0ec11289fdc>
Since this changes the patchlevel of the solibs, bump PORTREVISION of dependent
ports just to be sure.
(graphics/py-openshadinglanguage is unaltered and .includes the revision bump
from .../openshadinglanguage.)
MFH: 2021Q1 (this requires discussion by ports-secteam@!)
Reported by: VVD (IRC, #bsdports)
|
[ 10:30 mandree ] (Only the first 10 of 40 ports in this commit are shown above. )
graphics/openexr: graphics/ilmbase: v2.5.4 update
"Patch release with various bug/sanitizer/security fixes, primarily related to
reading corrupted input files."
<https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.5.4>
Cherry-pick upstream commit for GCC 11 compatibility:
<https://github.com/AcademySoftwareFoundation/openexr/commit/a40a6151c4e746eb8f93c7c06992d0ec11289fdc>
Since this changes the patchlevel of the solibs, bump PORTREVISION of dependent
ports just to be sure.
(graphics/py-openshadinglanguage is unaltered and .includes the revision bump
from .../openshadinglanguage.)
MFH: 2021Q1 (this requires discussion by ports-secteam@!)
|
|
Thu, 13 Aug 2020
|
[ 22:35 mandree ] (Only the first 10 of 35 ports in this commit are shown above. )
graphics/ilmbase, graphics/openexr: PORTREVISION bump for users
ilmbase and openexr were updated to v2.5.3 and their shlibs changed
from *.25.0.1 to *.25.0.2.
This is a PORTREVISION bump to ports using ilmbase or openexr
to chase that change and trigger rebuild.
|
|
Thu, 16 Jul 2020
|
[ 12:13 mandree ] (Only the first 10 of 36 ports in this commit are shown above. )
openexr/ilmbase update w/ shlib rename => PORTREVISION bumps of dependent ports
OpenEXR and ILMBASE updates to 2.5.2 rename the full shlib version
names from .0.0 to .0.1 => to be on the safe side, bump PORTREVISIONs.
Approved by: portmgr (blanket)
MFH: 2020Q3 (PORTREVISION bump after OpenEXR/ilmbase update)
Security: 714e6c35-c75b-11ea-aa29-d74973d1f9f3
|
|
Tue, 12 May 2020
|
[ 15:47 mandree ] (Only the first 10 of 39 ports in this commit are shown above. )
graphics/ilmbase: graphics/openexr: update to upstream release 2.5.1
Upstream release notes:
* A patch release that corrects the SO version for the v2.5 release,
which missed getting bumped in v2.5.0.
* This release also fixes an improper failure in IlmImfTest
when running on ARMv7 and AAarch64.
Bump PORTREVISION of all port directly requiring ilmbase or openexr
that are not marked BROKEN (shlib/.so file version bump).
Test build of all port directly depending on ilmbase or openexr
succeeded in poudriere in a 12.1-RELEASE amd64 jail.
|
|
Fri, 8 May 2020
|
[ 11:57 mandree ] (Only the first 10 of 43 ports in this commit are shown above. )
graphics/ilmbase: graphics/openexr: update to v2.5.0
ChangeLog:
- https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.5.0
* Bump PORTREVISION of all consumers except py-openimageio (BROKEN).
* cad/PrusaSlicer:
LIB_DEPENDS: remove version from libHalf.so
BUILD_DEPENDS+=qt5-buildtools as package (needed on bare metal builds)
USE_GL+=gl
USES+=pkgconfig (needed to find libHalf)
|
|
Sun, 5 Jan 2020
|
[ 02:17 mandree ] (Only the first 10 of 64 ports in this commit are shown above. )
graphics/ilmbase, graphics/openexr: upgrade to upstream v2.4.0
graphics/gstreamer1-plugins-openexr: switch from C++98 to C++11 to
match new OpenEXR headers and unbreak compilation.
Bump PORTREVISION of all ports depending directly on either, based
on assessing INDEX-12 (bump_portrevision.pl -l (shallow) used).
Release Notes:
https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.4.0
The update was deliberately deferred until after 2020Q1, and should
not be MFH'd back to it.
|
|
Wed, 16 Oct 2019
|
[ 15:24 pkubaj ]
graphics/exrtools: unbreak on arm
Builds fine.
Approved by: mentors (implicit approval)
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Thu, 20 Dec 2018
|
[ 08:21 ehaupt ]
- Fix build with GCC-based architectures
- Add USES=localbase:ldflags
- Re-generate patch files
- Pacify portlint
PR: 234187
Submitted by: pkubaj@anongoth.pl
|
|
Sat, 22 Sep 2018
|
[ 10:15 mandree ] (Only the first 10 of 70 ports in this commit are shown above. )
Update ilmbase and openexr to 2.3.0, rename OpenEXR to openexr.
Release notes: <https://github.com/openexr/openexr/releases/tag/v2.3.0>
Adjust LIB_DEPENDS of all ports that require ilmbase or openexr to chase
the new lower-case spelling of the name, and to omit the version from the
library name to ease future maintenance.
Bump PORTREVISION of all ports that depend on ilmbase or openexr directly,
so that they all get rebuilt on upgrades.
Add patches to graphics/ampasCTL to keep it alive, with (a) ilmbase now
that its Iex::BaseExc class is no longer derived from std::string,
details were given upstream through https://github.com/ampas/CTL/issues/71
and (b) to unwind semicolon/;-lists in cmake that stem from openexr/
ilmbase pkg-config variables.
(Note ampasCTL is unmaintained as FreeBSD port, and upstream,
and I cannot run-time test it.)
Poudriere build tests on 11.2-RELEASE-p1 amd64 of ALL ports depending
directly or indirectly on ilmbase and/or openexr have passed without
regressions. Thus invoking due diligence, I believe I have done the
equivalent of an -exp run, and do not require approval for the dependency
chases to third-party ports.
|
|
Fri, 1 Dec 2017
|
[ 01:58 mandree ] (Only the first 10 of 49 ports in this commit are shown above. )
Security update OpenEXR and ilmbase to 2.2.1.
While here, fix libIlmImfUtil_la_LDFLAGp so that when linking libIlmImfUtil,
the locally built libIlmImf gets precedence over the one in /usr/local,
to permit upgrades in a running system with the older version installed.
This changes the library's SONAME, so bump PORTREVISION of all dependees.
Unfortunately, this looks a bit too intrusive for an MFH to 2017Q4.
Security: CVE-2017-9110
Security: CVE-2017-9111
Security: CVE-2017-9112
Security: CVE-2017-9113
Security: CVE-2017-9114
Security: CVE-2017-9115
Security: CVE-2017-9116
Security: 803879e9-4195-11e7-9b08-080027ef73ec
|
|
Thu, 30 Nov 2017
|
[ 06:13 linimon ] (Only the first 10 of 189 ports in this commit are shown above. )
For ports that are marked BROKEN on armv6, and also fail to build on
armv7, mark them so.
This is part two of a multipart commit to bring armv7 ports to parity
with armv6.
Approved by: portmgr (tier-2 blanket)
Obtained from: lonesome.com -exp run
|
|
Sat, 27 May 2017
|
[ 20:33 linimon ] (Only the first 10 of 22 ports in this commit are shown above. )
Mark some ports failing on armv6, for errors classified as "configure_error".
Note: this skips all the ports that _sometimes_ fail with CMake errors. We
need to investigate that problem, and find out if it is specific to the qemu
environment.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
|
|
Mon, 8 Aug 2016
|
[ 14:24 ehaupt ]
Register graphics/ilmbase as LIB_DEPENDS
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Mon, 22 Jun 2015
|
[ 18:33 antoine ] (Only the first 10 of 374 ports in this commit are shown above. )
Convert to USES=jpeg
|
|
Tue, 6 Jan 2015
|
[ 09:38 ehaupt ]
Move MASTER_SITES from CRITICAL to LOCAL/ehaupt
|
|
Thu, 25 Dec 2014
|
[ 20:54 bapt ] (Only the first 10 of 446 ports in this commit are shown above. )
Bump portrevision after png update
|
[ 19:04 antoine ] (Only the first 10 of 332 ports in this commit are shown above. )
Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Fri, 15 Aug 2014
|
[ 20:37 mandree ] (Only the first 10 of 522 ports in this commit are shown above. )
Upgrade OpenEXR and ilmbase to 2.2.0.
GCC 4.2 in FreeBSD 8.X/9.X base is now too old to compile OpenEXR, so
GCC-based systems will upgrade to the default ports compiler (GCC 4.7
currently.)
Add two patches to OpenEXR to permit building it in a live system with
the older OpenEXR version installed. Bug report filed to upstream Github
at https://github.com/openexr/openexr/issues/130
Couple OpenEXR more tightly to ilmbase and require its exact .so
version.
Add UPDATING note, and bump PORTREVISION of all dependent ports.
Proto-STAGE hugin-devel, and mark it IGNORE because hugin is newer.
Approved by: portmgr (implicit for bumping PORTREVISION on unstaged ports)
|
|
Wed, 18 Dec 2013
|
[ 14:35 ehaupt ] (Only the first 10 of 15 ports in this commit are shown above. )
Use new LIB_DEPENDS regime
|
|
Wed, 20 Nov 2013
|
[ 14:25 nemysis ] (Only the first 10 of 38 ports in this commit are shown above. )
- Bump dependent ports' revisions (graphics/ilmbase and graphics/OpenEXR)
Approved by: wg (mentor)
|
|
Thu, 31 Oct 2013
|
[ 00:32 nemysis ] (Only the first 10 of 58 ports in this commit are shown above. )
graphics/ilmbase
- Update to 2.0.1
- Change master sites to SAVANNAH
- Change maintainer email to @FreeBSD.org
- Remove conflict with non existent Port
- USES pathfix pkgconfig
- Add executable
- Add DOCS Option
- Support STAGEDIR and add OPTIONS_SUB
- Use pathfix instead of simple patches
- Adjust patches
- Change WWW
graphics/OpenEXR (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 25 Oct 2013
|
[ 12:42 ehaupt ] (Only the first 10 of 19 ports in this commit are shown above. )
Fix package list.
|
|
Wed, 23 Oct 2013
|
[ 10:26 ehaupt ] (Only the first 10 of 48 ports in this commit are shown above. )
Support staging.
|
|
Fri, 20 Sep 2013
|
[ 18:35 bapt ] (Only the first 10 of 1084 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)
|
|
Wed, 24 Jul 2013
|
[ 08:19 ehaupt ] (Only the first 10 of 161 ports in this commit are shown above. )
Remove MAKE_JOBS_SAFE which is now default.
|
|
Mon, 8 Jul 2013
|
[ 18:42 ehaupt ] (Only the first 10 of 73 ports in this commit are shown above. )
- Convert USE_GMAKE to USES=gmake
- Change pkgconfig:build to pkgconfig since it's the same and it's bad practice.
It accidentally slipped in during the original introduction
- Trim header
|
|
Tue, 23 Apr 2013
|
[ 07:59 ehaupt ]
Convert to USES=pkgconfig
|
|
Thu, 17 Jan 2013
|
[ 03:32 swills ]
- Fix build with new OpenEXR
Approved by: ehaupt
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Tue, 27 Dec 2011
|
[ 15:14 ehaupt ] (Only the first 10 of 72 ports in this commit are shown above. )
Pacify portlint
Feature safe: yes
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Tue, 25 Jan 2011
|
[ 19:59 ehaupt ] (Only the first 10 of 87 ports in this commit are shown above. )
Add LICENSE and remove MD5 sums.
Feature safe: yes
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
|
Fri, 27 Mar 2009
|
[ 09:53 ehaupt ] (Only the first 10 of 132 ports in this commit are shown above. )
Mark MAKE_JOBS_SAFE
|
|
Thu, 27 Mar 2008
|
[ 19:27 ehaupt ] (Only the first 10 of 72 ports in this commit are shown above. )
Use MASTER_SITE_CRITICAL
|
|
Thu, 20 Mar 2008
|
[ 09:46 pav ] (Only the first 10 of 70 ports in this commit are shown above. )
- Remove USE_GETOPT_LONG which is a no-op since March 2007
|
|
Sun, 7 Oct 2007
|
[ 17:46 nork ] (Only the first 10 of 13 ports in this commit are shown above. )
Chase OpenEXR library version bumped.
|
|
Thu, 4 Oct 2007
|
[ 01:10 edwin ] (Only the first 10 of 27 ports in this commit are shown above. )
Remove always-false/true conditions based on OSVERSION 500000
|
|
Sun, 11 Mar 2007
|
[ 08:50 nork ]
o Update to 1.4.0
o Chase libraries version bump to depending on this port.
[NOTE]
I disabled FLTK support, so you can't use OpenEXR's applications.
Because I'm validating FLTK support.
Spotted by: Nikolaj Thygesen <nikolaj.thygesen <@> diamondbox.dk>
Obtained from: Florian Kainz <kainz <@> ilm.com>
Committed at: AsiaBSDCon 2007 in Tokyo, Japan
Memorial Committing with:
bushman, kuriyama, hrs, gnn, nobutaka, nyan, motoyuki, metal,
simokawa, akiyama, ume, rwatson, pjd, mckusick, takawata,
murray, cjh, brooks, daichi, delphij, ups, rrs
|
|
Thu, 1 Jun 2006
|
[ 12:13 ehaupt ] (Only the first 10 of 83 ports in this commit are shown above. )
Add an additional mirror.
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Sun, 19 Feb 2006
|
[ 11:39 ehaupt ] (Only the first 10 of 55 ports in this commit are shown above. )
Remove deprecated USE_REINPLACE
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Thu, 6 Oct 2005
|
[ 11:57 ehaupt ] (Only the first 10 of 107 ports in this commit are shown above. )
Change MAINTAINER address for my ports.
Approved by: novel (mentor)
|
|
Sun, 18 Sep 2005
|
[ 00:13 pav ]
- Fix build on 4.X
PR: ports/86282
Submitted by: Emanuel Haupt <ehaupt@critical.ch> (maintainer)
Reported by: krismail
|
|
Sat, 17 Sep 2005
|
[ 00:04 nork ]
Add MASTER_SITES.
PR: ports/86238
Submitted by: Emanuel Haupt <ehaupt@critical.ch> (maintainer)
|
|
Thu, 15 Sep 2005
|
[ 15:22 nork ]
Add exrtools 0.4, utilities for manipulating with HDR
images in OpenEXR format.
PR: ports/84945
Submitted by: Emanuel Haupt <ehaupt@critical.ch>
|
Number of commits found: 67 |
As an Amazon Associate I earn from qualifying purchases.