| non port: graphics/exif/Makefile |
|
SVNWeb
|
Number of commits found: 37 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 022e658 (Only the first 10 of 771 ports in this commit are shown above. )
graphics: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Abel Chow <ozsanh45vds001@sneakemail.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Ade Lovett <ade@lovett.com>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Hayward <xelah@xelah.com>
* Alex Ivasyuv <siegerstein@pochta.ru>
* Alex Samorukov <samm@os2.kiev.ua> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sat, 10 Oct 2020
|
[ 07:44 sunpoet ]  
Use NLS_CONFIGURE_ENABLE
|
|
Mon, 5 Oct 2020
|
[ 17:24 sunpoet ]
Update to 0.6.22
- Update MASTER_SITES
- Update WWW
Changes: https://github.com/libexif/exif/blob/master/NEWS
|
|
Thu, 8 Dec 2016
|
[ 19:23 tijl ] (Only the first 10 of 122 ports in this commit are shown above. )
Remove libiconv.so.3 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps. Bump dependent ports that have not
been bumped since.
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Mon, 19 Oct 2015
|
[ 20:20 sunpoet ]
- Add LICENSE_FILE
- Use USES=localbase
|
|
Thu, 4 Jun 2015
|
[ 09:08 amdmi3 ]
- Add CPE info
Approved by: portmgr blanket
|
|
Fri, 25 Oct 2013
|
[ 17:10 sunpoet ]
- Add LICENSE
- Convert to new options helper
- Support STAGEDIR
|
|
Fri, 20 Sep 2013
|
[ 18:35 bapt ] (Only the first 10 of 1084 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)
|
|
Fri, 13 Sep 2013
|
[ 15:41 sunpoet ]
- Update to 0.6.21
- Convert to new LIB_DEPENDS format
- Use USES=gmake
- Use ICONV_CONFIGURE_ARGS
- Cosmetic change
- Take maintainership
Changes: http://libexif.cvs.sourceforge.net/viewvc/libexif/exif/NEWS
|
|
Wed, 14 Aug 2013
|
[ 22:35 ak ] (Only the first 10 of 1725 ports in this commit are shown above. )
- Remove MAKE_JOBS_SAFE variable
Approved by: portmgr (bdrewery)
|
|
Tue, 9 Jul 2013
|
[ 21:26 pav ] (Only the first 10 of 52 ports in this commit are shown above. )
- Drop all my ports
|
|
Mon, 29 Apr 2013
|
[ 22:27 bapt ] (Only the first 10 of 54 ports in this commit are shown above. )
Convert a bunch of ports from WITHOUT_NLS -> ${PORT_OPTIONS:MNLS}
While here:
- trim headers
- convert to new options framework
|
|
Sat, 27 Apr 2013
|
[ 11:59 mva ] (Only the first 10 of 219 ports in this commit are shown above. )
- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here
Reviewed by: zeising
|
|
Fri, 26 Apr 2013
|
[ 10:44 ak ] (Only the first 10 of 277 ports in this commit are shown above. )
- Convert USE_GETTEXT to USES (part 4)
Approved by: portmgr (bapt)
|
|
Tue, 23 Apr 2013
|
[ 10:47 bapt ] (Only the first 10 of 84 ports in this commit are shown above. )
Convert g* to USES=pkgconfig
|
|
Thu, 14 Mar 2013
|
[ 08:17 pclin ] (Only the first 10 of 35 ports in this commit are shown above. )
- graphics/libexif:
* Update to 0.6.21
* Add LICENSE
* Switch to OptionsNG and PORTDOCS
- Document libexif 2012-07-12 vulnerabilty
- Bump PORTREVISION for libexif related ports
- Trim headers while here
PR: ports/175910
Approved by: swills (mentor)
Security: d881d254-70c6-11e2-862d-080027a5ec9a
|
|
Tue, 7 Feb 2012
|
[ 07:24 miwi ]
- Respect LOCALBASE
|
|
Wed, 16 Mar 2011
|
[ 21:54 pav ]
- Update to 0.6.20
|
|
Fri, 4 Mar 2011
|
[ 02:11 wen ]
- Bump PORTREVISION to chase the update of libexif
|
|
Thu, 3 Jun 2010
|
[ 11:31 pav ]
- Update to 0.6.19
|
|
Mon, 31 May 2010
|
[ 02:01 ade ] (Only the first 10 of 1416 ports in this commit are shown above. )
Bounce PORTREVISION for gettext-related ports. Have fun, ya'll.
|
|
Sat, 22 Aug 2009
|
[ 00:23 amdmi3 ] (Only the first 10 of 415 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with G
|
|
Fri, 30 Jan 2009
|
[ 09:00 pav ]
- Update to 0.6.17
|
|
Fri, 6 Jun 2008
|
[ 13:35 edwin ] (Only the first 10 of 304 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Fri, 29 Feb 2008
|
[ 20:25 pav ]
- Bandaid build of gettext refusenicks
PR: ports/121231
Submitted by: Helge Oldach <ports-graphics-exif-feb08@oldach.net>
|
|
Mon, 23 Jul 2007
|
[ 09:36 rafan ] (Only the first 10 of 437 ports in this commit are shown above. )
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
|
|
Sun, 27 May 2007
|
[ 15:24 pav ]
- Update to 0.6.15
|
|
Fri, 25 May 2007
|
[ 12:07 pav ] (Only the first 10 of 18 ports in this commit are shown above. )
- Chase libexif update
|
|
Tue, 24 Apr 2007
|
[ 18:39 pav ]
- Support WITHOUT_NLS
PR: ports/111459
Submitted by: Helge Oldach <ports-exif-apr07@oldach.net>
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Tue, 24 Jan 2006
|
[ 08:29 pav ]
- Record dependency on iconv
Reported by: krismail
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Tue, 18 Oct 2005
|
[ 08:30 pav ]
- May this port always find it's popt.
Reported by: dosirak via kris
|
|
Mon, 2 May 2005
|
[ 19:46 pav ]
Command line utility to read, write, modify and display EXIF data found
in digital image files written by digital cameras, using libexif.
|
Number of commits found: 37 |
As an Amazon Associate I earn from qualifying purchases.