graphics/poppler: bump portrevision of consumers

framework: convert bsd.gstreamer.mk to Uses/gstreamer.mk

- convert bsd.gstreamer.mk to Uses/gstreamer.mk
- convert ports tree to make use of USES=gstreamer
- remove duplicate dependency lines from the tree

Differential Revision: https://reviews.freebsd.org/D35097

graphics/evince: Enable PDF in meson

graphics/poppler: bump portrevision of consumers

Bump revisions after 0ee787592d5a due to so-version bump.

PR:		 263009

graphics/evince: reinstate PDF backend

The PDF backend was dropped, as evince was updated to 42.2
which requires poppler >=22.02 while that one still being
at 22.01 in fe838ad373e26eb5880b1f3450af1350cf9b5904.

While here, add missing plist-subs to the @lite plist

PR:		263009
PR:		263536
PR:		263577

graphics/evince: Update to 42.2

textproc/libxml2: bump all LIB_DEPENDS consumers

This is a separate commit to facilitate easier cherry-picking for
quarterly.

PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)

graphics/poppler: bump consumers

Bump consumers of graphics/poppler after
e25859e09380f5930718094423dc8616cbb202b3

textproc/libxml2: bump all dependencies

This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246

graphics/evince: unbreak build with Meson 0.61.0

backend/meson.build:55:7: ERROR: Function does not take positional arguments.

PR:		260943
Reported by:	antoine (via exp-run)
Regressed by:	https://github.com/mesonbuild/meson/commit/61f2866a9fa1

Fix CONFLICTS entries of multiple ports

There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.

This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.

Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port

graphics/poppler: update to 21.12

Release 21.12.0:
    core:
         * Add API to add images
         * CairoOutputDev: Fix de-duping of Flate images
         * Fix crash on broken files when using non-default
ENABLE_ZLIB_UNCOMPRESS. Issue #393
         * Minor code improvements

    glib:
         * Add API for validation of signatures
         * Add API to read/save to file descriptor

    utils:
         * pdftohtml: Reduce sensitivity of duplicate detection. Issue #1117

    build system:
         * Increase C++ standard to 17

Exp-run by:	antoine
PR:		260344

graphics/evince: Update to 41.3

graphics/evince: fix option handling in plist

The plist subs for some of the options got lost during the upgrade
in 1c65e8910cf990e9ad7158ecc8a70137423be370 .

Restore them.

PR:		259694
Reported by:	VVD <vvd@unislabs.com>, amdmi3,  fullermd@over-yonder.net

Bump PORTREVISION of graphics/poppler consumers.

PR:		259656

graphics/evince: Re-add DVI option

graphics/evince: Update options to current

graphics/evince: Update to 41.2

graphics/poppler: bump consumers after 2dee0997fbc9ee01991f73f0fa55f9b18908a264

INSTALLS_ICONS: retire the macro and rework the related dependencies

While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)

graphics/evince: Add CPE information

Approved by:	portmgr (blanket)

poppler: bump revisions of users

Bump the remaining users of poppler after
d98b56f1deb5b6a03a7e04fc16192ecb2af9df1e

PR:		258206

graphics/poppler: update to 21.08.0

Release 21.08.0:
        core:
         * Add API to allow addition and modification of outlines into a PDF
         * Use additional samples to test for constant parts of an axial
gradient
         * forms: Create fallback fonts for some well known font names
         * Support reading the PDF Version from the Catalog
         * Fix XRef::copy when there are modified objects
         * Take into account that Date string may be in unicode
         * JBIG2Stream: Fix regression in "Do not consider a size-0 to be an
error"
         * Replace a local bubble sort implementation by std::sort
         * Fix issues with malformed files

        build system:

graphics/evince: Update to 40.4

graphics/poppler: update to 21.07.0

Release 21.07.0:
        core:
         * JBIG2Stream: Do not consider a size-0 to be an error. Issue #535
         * PSOutputDev: fix off-by-one error for image masking in L1/L2 output.
Issue #1088
         * CairoOutputDev: Fix memory leak on broken files
         * Minor code improvements

        build system:
         * set C standard to 11 without extensions

Exp-run by:	antoine
PR:		256981

graphics/poppler: update to 21.06.0

Release 21.06.0:
        core:
         * Fix rendering of some extended latin1 characters in annotations.
Issue #1070
         * Support some not so well formed documents with password. Issue #1083
         * Add API to get notified if the xref is reconstructed
         * Add somewhat fancier left/right signature visual representation
         * Fix crashes in malformed files
         * Minor code improvements

        qt6:
         * Change some functions to return std::unique_ptr

        qt5/qt6:

graphics/poppler: update to 21.05.0

Release 21.05.0:
        core:
         * Fix crashes in malformed files
         * Export SplashFont* symbols used by Scribus
         * Minor code improvements

        qt5/qt6:
         * Make sure new signatures are always properly oriented
         * Allow to pass the border width when signing

        glib:
         * Enhance find to support multi-line matching

        utils:
         * pdftoppm: Fix regression when using single scaleTo. Issue #1062

        build system:
         * Allow to disable building manual tests

PR:		255562
Exp-run by:	antoine

graphics/poppler: update to 21.04.0

Release 21.04.0:
        core:
         * Hide symbols by default
         * TextSelectionDumper: fix word order for RTL text
         * Fix rendering of text in some files. Issue #1052
         * Implement rendering of Masks of Image subtype. Issue #1058
         * Forms: fix unclicking standalone form buttons. Issue #1034

        glib:
         * Expose more fields from MediaRendition in PopplerMedia
         * Use stock glib macro to define boxed type
         * Remove incorrecly used volatile from enum type registration code

Remove # $FreeBSD$ from Makefiles.

graphics/poppler: update to 21.03.0

Release 21.03.0:
        core:
         * Fix parsing text in some broken pdf files. Issue #1040
         * Fix memory issue when using threads. Issue #1050
         * TextSelectionDumper: Fix getText() for space after word
         * Change signature of OutputDev:tilingPatternFill
         * Make PDFDocBuilder return a std::unique_ptr
         * Improve well formed check for shading functions
         * Fix leak in case of fread failing
         * Fix memory leak in broken file in JBIG2Stream::readGenericBitmap
         * PSOutputDev: Fix stack overflow in broken files

        glib:

graphics/evince: update to 3.38.2

graphics/poppler: update to 21.02

Release 21.02.0:
        core:
         * GfxCal*ColorSpace: introduce Bradford transform for chromatic
adaptation
         * Fix memory leak if saving the file fails
         * Internal code improvements
         * Fix various issues handling broken files
         * Make checkedAdd work for long long in MSVC

        qt5:
         * Properly export NewSignatureData class
         * Fix regression in QIODeviceOutStream + MSVC

        qt6:
         * Properly export NewSignatureData class
         * Fix regression in QIODeviceOutStream + MSVC

        utils:
         * pdftohtml: Fix error() parameter type

PR:		253183
Exp-run by:	antoine

graphics/evince: update to 3.38.1

graphics/poppler: update to 21.01.0

Release 21.01.0:
        core:
         * Faster routines for jpeg decoding
         * Fix reading signatures in encrypted files
         * Add white point correction when lcms is used
         * JBIG2Stream: Fix byte counting
         * Fix potential data loss if we try to fetch a non existing Ref after
modifying the document
         * Specifically use DeviceGray instead of DefaultGray for softmasks
         * Fix various issues handling broken files

        utils:
         * pdftocairo: Setmode binary for windows
         * pdfsig: Add hability to digitally sign files

graphics/poppler: update to 20.12.0

Changelog:
        core:
         * Draw better circles for circle annotations
         * Fix annotation line width if no appearance stream or style are given
         * Tweak rendering of highlight annotations
         * Fix border rendering of some annotations
         * Fix rendering of some files. Issue #976 Issue #567
         * PSOutputDev: provide options to set the rasterization color space and
ICC profile
         * PSOutputDev: for splashModeCMYK8 and language level >=2 activate
overprint emulation
         * PSOutputDev: use the DeviceN8 bitmap for rasterization with
CMYK-output + overprint
         * Use the font name without subset tag when querying for a system font
         * Splash: Fix wrong x adjustment during clipping
         * Splash: Fix blitImage in uncolored tiling patterns

graphics/evince: update to 3.38.0

PR:		250832
Submitted by:	Neel Chauhan <neel@neelc.org>

graphics/poppler: update to 20.11.0

Release 20.11.0:
        core:
         * More work on rendering of standalone Annot Widgets. Issue #806
         * Fix crashes in embedded file handling on broken files. Issue #967
         * Fix uninitialized memory read on broken files
         * Save a bit of memory in Dict data

        cpp:
         * Fix crashes in embedded file handling on broken files. Issue #966

        utils:
         * pdftohtml: HTML and XML output includes font opacity.

graphics/poppler: update to 20.10.0

Release 20.10.0:
        core:
         * Filter out repeated forms
         * Implement EmbedStream::reset()
         * CairoOutputDev: evict just font faces owned solely by cache.
         * Splash: Rename Yd to Ydown, Xu to Xup, etc.
         * Splash: fix crash in out-of-memory situation.
         * Fix some undefined behaviour situation with forged files

PR:		250052
Exp-run by:	antoine

First batch at upgrading gnome to 3.36/3.38

Update evolution-dataserver to 3.38.0 and because of ABI breakage update ports
depending on it
Update bijiben to 3.38.0
Update gnome-calendar to 3.38.0
Update gnome-contacts to 3.38
Update gnome-maps to 3.38.0
Patch gnome-todo to work with newer evolution-dataserver (patched obtained from
    OpenBSD/Archlinux)
Update evolution to 3.38.0
Update evolution-ews to 3.38.0 (among changes it brings support for office365)
Update folks to 0.14.0

Update cheese to 3.38.0

graphics/evince: fix packaging

- fix DVI option linkage against kpathsea
- fix plist when DBUS=off

PR:		249935
Submitted by:	VVD <vvd@unislabs.com>

Update to 3.36.7

While here convert the slaveport into a flavor

graphics/poppler: update to 20.09.0

Release 20.09.0:
        core:
         * Compability fix for Forms
         * Fix fetching of Objects failing in some cases
         * Fix clearing date in Annot setModified/setDate
         * TextSelectionPainter: support glyphless fonts
         * Splash: Don't try read past end of image
         * avoid abort() on large memory allocation
         * Fix memory leak on broken files
         * Fix potential invalid memory read
         * Small code improvements

        qt5:

Bump revisions of poppler consumers after r544863

graphics/poppler: update to 0.90

Release 0.90.0:
        core:
         * Color profile tweaks
         * Small signature improvements
         * BBoxOutputDev: Fix calculation when type3 fonts are involved
         * Fix potential crash when reading Forms
         * Fix infinite loop in broken file
        glib:
         * Fix adding annots in rotated pages
         * Add ability to reset forms
         * Several fixes to the documentation
        qt5:
         * Make it clear we require Qt 5.5

graphics/poppler: update to 0.89.0

Release 0.89.0:
        core:
         * Add support for ResetForm action. Issue #225
         * Fix crash in PDFDoc::getSignatureFields when there's no Forms at all
         * Fix exporting to PS of some files with CID fonts
         * Use ICC profiles in PS output (if new enough lcms is used)
         * Allow almost-singular tiling pattern matrices. Issue #894
         * Fix memory leak when failing to load some fonts
         * CairoOutputDev: Use stroke opacity when clipping to a stroke path
         * CairoOutputDev: Fix tiling patterns when pattern cell is too far.
Issue #190

        glib:
         * Add poppler_movie_get_aspect

        cpp:
         * Add the font infos to the text_box object

Exp-run by:	antoine
PR:		246848

graphics/poppler: update to 0.88.0

Release 0.88.0:

        core:
         * Support Widget Annotation Buttons not linked to any Form
         * SplashOuputDev: Use stroking opacity when clipping to a stroke path
         * Handle 1 bit RGB images in ICC colorspace
         * Internal code improvements

        qt5:
         * Add Document::signatures. Returns signatures not attached to any page
         * ArthurOutputDev: Fix font hinting
         * ArthurOutputDev: Set the opacity when filling with axial gradients
         * ArthurOutputDev: Implement the clipToStrokePath method

graphics/poppler: update to 0.87.0

Release 0.87.0:
        core:
         * Fix crashes due to inconsistent vtables for Clang builds
         * Fix leak in broken files
         * Internal code improvements

        qt5:
         * Add option to get form choice for export value
         * ArthurOutputDev: Avoid division by zero in updateLineDash. Issue #695

        glib:
         * Internal code improvements

         utils:
         * pdftohtml: Fix memory leak in HtmlOutputDev::getLinkDest

PR:		245150
Exp-run by:	antoine

Update poppler to 0.86.1

Release 0.86.1:
        core:
         * Fix regression in Browse Link handling
         * Internal code improvements

Release 0.86.0:
        core:
         * Fix link content exfiltration attack
         * Splash: Implement gouraudTriangleShadedFill for some non parametrized
shadings. Issue #881
         * Fix case unsensitive search for Old Hungarian, Warang Citi,
Medefaidrin and Adlam
         * Internal code improvements

        glib:

Bump revision of poppler dependencies

- poppler was updated in r525051, bump revisions

graphics/poppler: update to 0.84.0

Release 0.84.0:
        core:
         * Fix crash when converting from Unicode to ASCII-7
         * Splash::scaleImageYdXu: Protect against crash if srcWidth is too big
         * JBIG2Stream: fix potential crash in malformed documents
         * JBIG2Stream: fix leak in reset() if called several times
         * Internal code improvements

        utils:
         * pdfimages: Add error message if first page is larger then number of
pages.
         * pdfinfo: Improved paper size recognition
         * pdfsig: Fix exit code when dumping signatures
         * pdftocairo: Error out when even/odd selects 0 pages

Add USES=xorg USES=gl, ports categories g

Add USES=xorg and USES=gl to ports in categories starting with 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

graphics/poppler: update to 0.82.0

Release 0.82.0:
        core:
         * Fix not being able to open some files. Issue #832
         * Fix crashes in malformed files
         * Fix memory leak on broken files
         * Minor performance improvements
         * Minor code improvements

        glib:
         * Add poppler_document_new_from_bytes
         * PopplerAttachment: Silence deprecation warnings for ctime/mtime

        build system:
         * pdf-inspector: Support builddir != srcdir
         * Install Cairo* headers if Cairo has been found

Thanks to adridg@ for fixing all the fallout.

Exp-run by:	antoine
PR:		241532
Approved by:	gnome (kwm, implicit)

graphics/poppler: update to 0.81.0

Release 0.81.0:
        core:
         * Splash: Always enable support for CMYK rasterization
         * CairoOutputDev: Check scaled dimensions for 0. Issue #737
         * BaseCryptStream: Fix potential uninitialized memory read
         * SplashBitmap: Fix wrong width condition for splashModeDeviceN8
         * Fix crashes in malformed files

PR:		240781
Exp-run by:	antoine
Approved by:	gnome (kwm, implicit)

graphics/poppler: update to 0.80.0

Release 0.80.0:
core:
 * Annotations: Implement support for setting a different text in the appearance
stream than the real text
 * Splash: Optionally use small_vector from boost
 * Fix memory leaks on broken files
 * Fix abort on broken files
 * Small code simplifications
 * Remove USE_FIXEDPOINT support. Issue #821

qt5:
 * Fix MSVC build
 * Add subsitute-font information
 * Fix since marker of some functions

graphics/poppler: update to 0.79.0

Release 0.79.0:
        core:
         * Fix regression on TextSelectionPainter
         * Fix parsing of DefaultAppearance
         * Fix memory leak in PostScriptFunction
         * Fix crashes in fuzzed files

        qt5:
         * Implemented support for setIcon by changing appearance
         * Added option to set the form available to print
         * QString::null is deprecated, use QString()
         * Replace deprecated qStableSort with std::stable_sort

        build system:
         * Turn README into README.md and expand it

PR:		239277
Exp-run by:	antoine
Approved by:	gnome (kwm, implicit)

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

graphics/poppler: update to 0.78.0

Release 0.78.0:
        core:
         * Fix line annotation arrows for usage in dimensioning
         * Handle Ink annots without an InkList but with an AP
         * Fix typos preventing parsing of Movie start and duration
         * Fix crash on malformed files

        glib:
         * Add poppler_document_create_dests_tree()
         * Don't use the deprecated g_type_class_add_private()
         * Document the differences between render() and render_for_printing()
         * Fix introspection for poppler_document_new_from_data
         * Don't create PopplerInputStream with length 0. Issue #414

graphics/poppler: update to 0.77.0

Release 0.77.0:
        core:
         * Fix crash on signature handling. Issue #766
         * Fix small memory leak in SignatureHandler::getCertificateInfo
         * Splash: Restrict filling of overlapping boxes. Issue #750
         * Fix crash on malformed files

        qt5:
         * Fix optional content handling with exclusive layers

        cpp:
         * Make render_page thread-safe

        utils:
         * pdfsig: Fix small memory leak
         * pdftotext: Fix typo in manpage

PR:		238115
Exp-run by:	antoine
Approved by:	gnome (kwm, implicit)

graphics/poppler: update to 0.76.1

From Changelog at https://poppler.freedesktop.org/releases.html :

Release 0.76.1:
        core:
         * Make the mul tables be calculated at compile time with constexpr.
         * splash: Fix compile with SPLASH_CMYK enabled
         * Some typo fixing in error messages

        qt5:
         * Fix regression in annotation handling

        build system:
         * Fix some typos in build system output and comments

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Update evince to 3.28.5.

Obtained from:	GNOME devel repo.

The FreeBSD GNOME team proudly presents GNOME 3.28 for FreeBSD.

The offical GNOME 3.28 release notes can be found at
https://help.gnome.org/misc/release-notes/3.28/

Thanks to Antoine Brodin for running the exp-runs.

PR:		229761

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

graphics/evince: fix plist if DBUS is not selected

PR:		221781
Submitted by:	vvd@unislabs.com

graphics/evince{-lite}: update 3.18.2 -> 3.26.0

PR:		221781
Submitted by:	rozhuk.im@gmail.com, joerg
Reviewed by:	Rainer Hurling <rhurlin@gwdg.de>, Greg Veldman <greg@gregv.net>
Approved by:	gnome (maintainer timeout)
Relnotes:	https://github.com/GNOME/evince/blob/master/NEWS

Some ports had execinfo disabled during the cretaceous era, enable
support back.

PR:		220271
Submitted by:	mat (review), Yasuhiro KIMURA (PR)
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D11488

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

Bump PORTREVISION after recent poppler update

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

Chase update of graphics/poppler (and slaves ports) in revision r430777

Chase update of Poppler after revision r421386

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

The FreeBSD GNOME team proudly presents GNOME 3.18 for FreeBSD.

The offical GNOME 3.18 release notes can be found at
https://help.gnome.org/misc/release-notes/3.18/

This update doesn't contain the glib/gtk c++ bindings which will
be done in a another update due to the requirement on c++11 and the
amount of fallout this probably will give.

GDM is still at version 3.16 due to some issues.

Bump mate-themes to use the gtk 3.18 version of the themes.

Thanks to Antoine Brodin for running the exp-runs.

This release was made possible by the following people:
  Gustau Perez
  Ting-Wei_Lan

PR:	207006

Enable DJVU support in evince[-lite] by default.

While here do the same for atril[-lite].

PR:		203710
Submitted by:	vas@mpeks.tomsk.su

Update poppler to 0.40.0. [1]

Add patches to py-poppler [2] and rubygem-poppler [3] to fix the build
of these ports with poppler 0.39+.

PR:		206293 [1]
Submitted by:	olivierd@ [1]
Obtained from:	ubuntu [2], rubygem-poppler upstream [3]

Drop 8 support.

With hat:	portmgr
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3694

The FreeBSD GNOME team proudly presents GNOME 3.16 for FreeBSD.

The offical GNOME 3.16 release notes can be found at
https://help.gnome.org/misc/release-notes/3.16/

Upgrade instructions for port users:

Delete the old tracker package with:
# pkg delete -f tracker
And user port upgrade tool of choice to upgrade.

Thanks to Antoine Brodin for running the exp-runs.

This release was made possible by the following people:
  Gustau Perez
  Ting-Wei_Lan

PR:		201980

Update poppler to 0.34.0. [1]

Chase all users of shlib version change of libpoppler.so.

PR:		201477 [1]
Submitted by:	olivierd@ [1]

By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do.  On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).

Bump PORTREVISION on all ports where the build log contains -export-symbols.

audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions.  Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to.  Fix a number of other issues in the same

* Add evince-lite port without dbus/nautilus/gnome-desktop
* Drop impress option, it gone.
* The keyring doesn't depend on nautilus anymore. Make it stand-alone,
  and don't depend on it implicitly.
* Sort OPTIONS_DEFINE and OPTIONS_DEFAULT.

The problem causing the build breakage on FreeBSD 8 was fixed
upstream, but the BROKEN tag was never removed from the port.
Remove the flag.

PR:		195943
Differential Revision:	https://reviews.freebsd.org/D2280
Reviewed by:	kwm
Approved by:	mat (mentor)

Update the Gnome stack to the latest in the 3.14 series.

Thanks to Gustau Perez <gustau.perez@gmail.com> for helping to keep thes
   ports updated.

Obtained from:	GNOME dev repo

Update poppler to 0.30.0 [1].

Make sure we use openjpeg1 in poppler, while openjpeg2 support
was added there still bugs in openjpeg2 that need to be fixed.
Add patches to inkscape for API changes in poppler 0.29.0 [2].

PR:		196599 [1]
Submitted by:	olivierd@ [1]
Exp-run by:	antoine@
Obtained from:	upstream [2]

Turn on XPS support by default.
libgxps is already present via nautilus and tracker.

Submitted by:	gabor@zahemszky.hu (freebsd-gnome@ ML)

Mark BROKEN on freebsd 8, fail to build

Reported by:	pkg-fallout

Update GNOME to 3.14.2.

This update was brought to you in collaboration with Gustua Perez

Make sure gtk30 pulls it the default theme (adwaita-icon-theme).
Update the extra gnome-shell-extensions so they work with gnome-shell 3.14.
Drop metacity from gnome3 meta-port.
Remove the gtile gnome-shell extension since it proven to be buggy.

Exp-run done by antoine@ for gdk-pixbuf2 deprecated API.

PR:		195414
Obtained from:	gnome dev repo

Bump PORTREVISION after graphics/poppler update to 0.26.3

Switch compiler:c++11-lang with compiler:c++11-lib to fix the build on 9.x

Submitted by:	antione@

The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2.
Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.

This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.

Apart from updating ports to newer versions

GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example
xscreensaver
can be used for sessions started without GDM.

Shell Extensions can be installed via https://extensions.gnome.org/ , we have

graphics/djvulibre:
- Add USES=libtool and bump dependent ports
- Remove threading related patches

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Link editors/gedit and graphics/evince with libICE.  (Fixup for r351936)

Reported by:	Mike Harding <mvharding@gmail.com>

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

Support stage

Update poppler to 0.24.4.

Update comment.
Use new LIB_DEPENDS syntax, use USES=pathfix.
Stagify.

Bump portrevision of all affected ports, and Update poppler* LIB_DEPENDS to
new syntax.

- Remove manual creation and removal of share/applications, as it's now in the
mtree (categories starting with [fgijk])

Approved by:	portmgr (bdrewery)

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

Add en explicit dependency on pkgconf

Convert to USES=desktop-file-utils, drop depend on unzip it in base these
days, fix a bug the t1lib option that was missed in the OptionsNG conversion.

Obtained from:	GNOME dev repo.

Rectify USE_TEX to support both of teTeX and TeXLive.

TEX_DEFAULT:
	A knob to choose teTeX or TeXLive.  One can specify in /etc/make.conf.

USE_TEX:
	A knob for port developers.  Valid keywords are listed in
	bsd.tex.mk.