Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

graphics/drm-kmod: Fix dependency on firmwares

Don't overwrite RUN_DEPENDS, add to it. Also allow all architectures
supported by the concrete drm port, and IGNORE otherwise instead of only
depending on firmwares.

While here, indent .if/.elif/.endif correctly.

Approved by:		x11 (manu), tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36479

graphics/drm-kmod: Default to drm-510-kmod for >= 13.1

Now that 13.0 is EoL we can default everyone to drm-510-kmod

Sponsored by:	Beckhoff Automation GmbH & Co. KG
MFH:		2022Q3

cleanup: remove support for FreeBSD 13.0 which expired today.

- Mk/bsd.port.mk: mark 13.0 as unsupported
- Tools/scripts/portsearch: Drop support for FreeBSD <= 4
- archivers/zstd: revert "Fix build on FreeBSD 13.0"
- deskutils/xdg-desktop-portal: remove check for 13.0
- devel/libpeas: remove outdated comment
- editors/imhex: remove compatibility for 13.0
- editors/libreoffice: remove compatibility for 13.0
- editors/openoffice-4: remove compatibility for 13.0
- editors/openoffice-devel: remove compatibility for 13.0
- emulators/linux_base-c7: remove compatiblity for 13.0
- graphics/drm-kmod: remove detection for 13.0
- graphics/gpu-firmware-amd-kmod: do not check 13.0 anymore
- graphics/linux-c7-libdrm: remove support for 13.0

graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>

drm: points the WWW to the right place

Reported by:	grog

graphics/drm-kmod: Replace gpu-firmware-kmod depend with the correct version

We changed the version of the gpu-firmware-kmod ports and drm-kmod needs this
one
to work.

Sponsored by:	Beckhoff Automation GmbH & CO. KG

graphics/drm-kmod: Add dep on gpu-firmware-kmod

Missed in a mismerge.
This is needed so a simple pkg install drm-kmod will work 100% of the time.

Sponsored by:	Beckhoff Automation GmbH & Co. KG

graphics/drm-kmod: Track drm-510-kmod on CURRENT

5.10 is mature enough to be used on CURRENT machines.

Sponsored by:	Beckhoff Automation GmbH & Co. KG

cleanup: drop support for EOL FreeBSD 11.X

Search criteria used:
- 11.4
- OSREL*
- OSVER*
- *_FreeBSD_11

Input from:
- adridg: devel/qca-legacy
- jbeich: _WITH_DPRINTF, _WITH_GETLINE, GNU bfd workarounds
- sunpoet: security/p5-*OpenSSL*

Reviewed by:	doceng, kde, multimedia, perl, python, ruby, rust
Differential Revision: https://reviews.freebsd.org/D32008
Test Plan: make index

Remove # $FreeBSD$ from Makefiles.

graphics/drm-kmod: Chase supported kernel version range of drm-fbsd13-kmod

Reported by:	manu
MFH:		2021Q1

Hook drm-fbsd13-kmod to the maser drm-kmod port and bump its PORTREVISION.

Add new drm-fbsd13-kmod to the conflict lists of the other ports.
Be pedantic about version boundaries.

Approved by:	manu (on ports-committers)
MFH:		2021Q1

graphics/drm-kmod: drop support for expired graphics/drm-legacy-kmod

graphics/drm-kmod: simplify logic a bit.

Phabricator:	D26646

graphics/drm*kmod: Update to latest upstream

drm-current-kmod/drm-devel-kmod:
 - Remove local patch, code is upstream now
 - Fix amdgpu build on powerpc64
 - Depend on latest gpu-firmware-kmod (for navi14 and renoir users)

drm-kmod:
 - Need FreeBSD 1300108, missed in r548208

Clean up ports after FreeBSD 12.0 reached end-of-life.

emulators/mesen is left out for now, as it breaks on 11.3

Submitted by:	rene
Reviewed by:	jbeich, zeising
X-Differential Revision:	https://reviews.freebsd.org/D24211

Clean up support for FreeBSD 11.2.

While here, modernize some comments in Mk/bsd.*.mk.

Note that graphics/drm-fbsd11.2-kmod is not renamed yet, this was somewhat
under discussion.

Submitted by:	rene
Reviewed by:	antoine, jbeich, mat, zeising
Differential Revision:	https://reviews.freebsd.org/D21974

graphics/drm-kmod: Update supported versions

Update supported versions and ports selection in graphics/drm-kmod.  This
only affects current.

Reviewed by:	jmd
MFH:		2019Q3 (implicit, drm-drivers blanket)
Sponsored by:	B3 Init

Change maintainer of all drm kmod ports to x11@

Change maintainer of all drm kmod ports to x11@FreeBSD.org.  This way, PRs,
notice about build breakages from package builds and so on goes to the
entire x11@ team, and not just one member.

Approved by:	jmd (maintainer)

LinuxKPI-based DRM ports: move to new ports nomenclature.

After some discussions within the x11 team, it was decided to move to a new
nomenclature for the LinuxKPI-based DRM ports that correctly reflects the
FreeBSD version the ports are for. This will also allow us to move to dedicated
branches per FreeBSD release and eases porting work.

Functionally, this commit is a no-op as we are not moving to new snapshots.

Reflect the move in UPDATING and MOVED. Users using the graphics/drm-kmod meta
port should not be affected. Direct consumers of the DRM ports shall move, as
in MOVED, as follows:

drm-stable-kmod is drm-fbsd11.2-kmod
drm-next-kmod is drm-fbsd12.0-kmod
drm-devel-kmod is drm-current-kmod

Reviewed by:	zeising (x11)
Approved by:	zeising (x11)
Differential Revision:	https://reviews.freebsd.org/D18328

Remove compatibility code for FreeBSD < 11.2 from all ports.

Simplify some ports where DragonFlyBSD no longer needs to be special-cased.
Submitted by:	rene
Reviewed by:	bapt, jbeich
Differential Revision:	https://reviews.freebsd.org/D17724

new port: graphics/drm-kmod

This metaport encompasses the recommndations of the FreeBSDDesktop team for
DRM modules based on the FreeBSD version and architecture.

Reviewed by:	x11 (zeising), imp, rene
Approved by:	x11 (zeising)
Differential Revision:	https://reviews.freebsd.org/D16903

2007-03-01 www/ruby-webunit: has deprecated dependencies
2007-03-07 emulators/grustibus: Project was abandoned 6 years ago and expects an
old version of xmame (0.37b4), please use other frontends instead (like gxmame)
2007-03-10 graphics/drm-kmod: Broken on all supported versions of FreeBSD

Deprecate these ports that are broken on 5.x and above, with expiry in
1 month.

Remove USE_REINPLACE for categories starting with a G

- Add SHA256

SIZEify.

Return to ports@ -- I haven't maintained this in ages.

Set ONLY_FOR_ARCHS= i386.

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Change the BROKEN for 5.0 to IGNORE so that bento won't try to compile it.

Update to drm-kmod including the patches from this port and adding makefile
toggles to disable linux compat.  Fix the website address.

PR:             41854,43149

Update master site and email address, and disable on -current.

Update WWW tag

Approved by:    maintainer

PERL -> REINPLACE_CMD

PR:             ports/40505
Submitted by:   Scott Flatman <sf@dsinw.com>
Approved by:    maintainer

The web site has moved.

Update to match recent changes to current kernel API (mtx_init, suser).

Reviewed by: maintainer

Fix probing of Rage128 cards
Bump PORTREVISION

PR:             36111
Submitted by:   maintainer

Update to 0.9.5

PR: 35997
Submitted by: MAINTAINER

Update to 0.9.4: both fixes linux binary compatibility on some cards   and
quiets down module loading on boot    

update to 0.9.2.    

Add drm-kmod 0.9.2, a FreeBSD kernel modules for 3d acceleration   with the DRI.