15:17 Christian Weisgerber (naddy) 

audio/opus: bump consumers after update to 1.4

    feb1fa3

15:43 Stefan Eßer (se) 

Move more WWW entries from pkg-descr files into Makefiles

The WWW: lines in the pkg-descr files of these ports where not at the
end of those files and have been missed in prior conversion runs.

Approved by:	portmgr (implicit)

    986beaa

14:21 Tobias C. Berner (tcberner) 

games: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <benlutz@datacomm.ch>
  *  <janos.mohacsi@bsd.hu>
  *  Aaron Baugher
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron VonderHaar <avh4@usa.net>
  *  Aaron Zauner <az_mail@gmx.at>
  *  Adam Kranzel (adam@alameda.edu)
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alejandro Pulver <alejandro@varnet.biz>
  *  Alejandro Pulver <alepulver@FreeBSD.org>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Trull <freebsd.alex@trull.org>
  *  Alexander G. Chetirbock <bock@bock.nnov.ru>
  *  Alexander Langer <alex@FreeBSD.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexander Yerenkow <yerenkow@gmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@regency.nsu.ru>
  *  Alfonso S. Siciliano <alfix86@gmail.com>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Amar Takhar <verm@drunkmonk.net>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrej Zverev
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Zakhvatov
  *  Andrey Zakhvatov <andy@icc.surw.chel.su>
  *  Andy Kosela <akosela@andykosela.com>
  *  Anton Yudin <toha@FreeBSD.org>
  *  Arjan van Leeuwen <avleeuwen@piwebs.com>
  *  Ayumi M <ayu@commun.jp>
  *  Bartosz Fabianowski <freebsd@chillt.de>
  *  Beech Rintoul <beech@FreeBSD.org>
  *  Ben Smithurst <ben@scientia.demon.co.uk>
  *  Bob Bomar <bob@fly.homeunix.org>
  *  Brian Buchanan <brian@CSUA.Berkeley.EDU>
  *  Ceri Davies (ceri@FreeBSD.org)
  *  Chris D. Faulhaber <jedgar@FreeBSD.org>
  *  Christian Brueffer <chris@unixpages.org>
  *  Christoph Mallon <christoph.mallon@gmx.de>
  *  Christopher Preston <rbg@gayteenresource.org>
  *  Dag-Erling C. Smørgrav <des@FreeBSD.org>
  *  Daniel J. O'Connor <darius@dons.net.au>
  *  Daniel O'Connor <darius@dons.net.au>
  *  Daniel Roethlisberger <daniel@roe.ch>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  Dave Chapeskie <dchapes@ddm.on.ca>
  *  Dave Walton <dwalton@acm.org>
  *  David Siebörger <drs@rucus.ru.ac.za>
  *  Dmitry Marakasov <amdmi3@FreeBSD.org>
  *  Dom Mitchell <dom@happygiraffe.net>
  *  Dominic Fandrey
  *  Dominic Fandrey <kamikaze@bsdforen.de>
  *  Don Croyle <croyle@gelemna.org>
  *  Donald Burr <dburr@FreeBSD.org>
  *  Eckart "Isegrim" Hofmann
  *  Ed Schouten <ed@fxq.nl>
  *  Edwin Groothuis
  *  Edwin Groothuis <edwin@mavetju.org>
  *  Edwin Mons
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@critical.ch>
  *  Emmanuel Vadot <manu@FreeBSD.org>
  *  Eric Anholt
  *  Eric Anholt <anholt@FreeBSD.org>
  *  Erik Olson <erikolson@olsonexpress.com>
  *  Filippo Natali <filippo@widestore.net>
  *  Frank Laszlo <laszlof@freebsdmatrix.net>
  *  Frederic Culot <culot@FreeBSD.org>
  *  Frederic Culot <frederic@culot.org>
  *  Fredrik Carlsson <fredrik@wasadata.com>
  *  FreeBSD GNOME Team <gnome@FreeBSD.org>
  *  FreeBSD GNOME Team <gnome@freebsd.org>
  *  Ganael Laplanche <ganael.laplanche@martymac.org>
  *  Gautam Mani <execve@gmail.com>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Ginzburg Oleg
  *  GreenDog <fiziologus@gmail.com>
  *  Gustavo Perez Querol <gustau.perez@gmail.com>
  *  Göran Runfeldt <goranrunfeldt@home.se>
  *  HIYAMA Takeshi <th@cis.ibaraki.ac.jp>
  *  HOTARU-YA <hotaru@tail.net>
  *  Holger Lamm <holger@eit.uni-kl.de>
  *  Igor Pokrovsky <ip@doom.homeunix.org>
  *  Igor Pokrovsky <tiamat@comset.net>
  *  Igor Pokrovsky <tiamat@telegraph.spb.ru>
  *  Ilya A. Arhipov <admin@gorodkirov.ru>
  *  Ilya A. Arkhipov <rum1cro@yandex.ru>
  *  James FitzGibbon <jfitz@FreeBSD.org>
  *  James Howard <howardj@wam.umd.edu>
  *  Jan Jungnickel <jan@jungnickel.com>
  *  Jan Stocker <Jan.Stocker@t-online.de>
  *  Janni
  *  Janos Mohacsi <janos.mohacsi@bsd.hu>
  *  Jason Helfman <jgh@FreeBSD.org>
  *  Jean-Marc Zucconi <jmz@FreeBSD.org>
  *  Jean-Yves Lefort <jylefort@FreeBSD.org>
  *  Jean-Yves Lefort <jylefort@brutele.be>
  *  Jeremy <karlj000@unbc.ca>
  *  Jeremy Chadwick <yoshi@parodius.com>
  *  Jesse Smith <jessefrgsmith@yahoo.ca>
  *  Jim Mock <jim@FreeBSD.org>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Joel Sutton <jsutton@bbcon.com.au>
  *  Joel Sutton <sutton@aardvark.apana.org.au>
  *  Jordan DeLong <fracture@allusion.net>
  *  Jordan Irwin <antumdeluge@gmail.com>
  *  Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>
  *  Jose Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Josh Tolbert
  *  Julian Assange
  *  Juraj Lutter <otis@sk.freebsd.org>
  *  Kalten <kalten@gmx.at>
  *  Karsten Brandt <kbrandt@sdf-eu.org>
  *  Kevin Zheng <kevinz5000@gmail.com>
  *  Kirill Ponomarew <krion@FreeBSD.org>
  *  Kirill Ponomarew <ponomarew@oberon.net>
  *  Klaus Goger <klaus.goger@reflex.at>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kris Kennaway <kris@FreeBSD.org>
  *  Kuang-che Wu <kcwu@csie.org>
  *  Kyle Evans <kevans@FreeBSD.org>
  *  Lars Engels <lars.engels@0x20.net>
  *  Lars Thegler <lars@thegler.dk>
  *  Leland Wang <llwang@infor.org>
  *  Loren M. Lang <lorenl@alzatex.com>
  *  Mahdi Mokhtari <mokhi64@gmail.com>
  *  Makoto YAMAKURA <makoto@pinpott.spnet.ne.jp>
  *  Marc van Woerkom <3d@FreeBSD.org>
  *  Mark Huizer <xaa+ports@timewasters.nl>
  *  Mark Murray <markm@FreeBSD.org>
  *  Mark Pulford <mark@kyne.com.au>
  *  Martin Kropfinger
  *  Martin Tournoij <carpetsmoker@xs4all.nl>
  *  Martin Tournoij <martin@arp242.net>
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Mateusz Piotrowski <0mp@FreeBSD.org>
  *  Matthew Gibson <mdg583@hotmail.com>
  *  Matthew Hunt <mph@FreeBSD.org>
  *  Matthew Hunt <mph@pobox.com>
  *  Max Khon <fjoe@FreeBSD.org>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Maxime Henrion <mux@FreeBSD.org>
  *  Michael Alyn Miller <malyn@strangeGizmo.com>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael L. Hostbaek (mich@freebsdcluster.org)
  *  Michael Nottebrock <lofi@FreeBSD.org>
  *  Michael Williams <ports@mgwsoftware.com>
  *  Miguel Mendez <flynn@energyhq.es.eu.org>
  *  Neil Blakey-Milner <nbm@FreeBSD.org>
  *  Nick Johnson <freebsd@spatula.net>
  *  Nicklas Johnson <freebsd@spatula.net>
  *  Nicola Vitale <nivit@FreeBSD.org>
  *  Nik Clayton <nik@FreeBSD.org>
  *  Nikolai Lifanov <lifanov@mail.lifanov.com>
  *  Oleg Alexeenkov
  *  Oliver Lehmann <lehmann@ans-netz.de>
  *  Patrick Li <pat@FreeBSD.org>
  *  Patrick Li <pat@databits.net>
  *  Pav Lucistnik <pav@FreeBSD.org>
  *  Pawel Pekala <pawel@FreeBSD.org>
  *  Peter Dunning
  *  Peter Pentchev <roam@FreeBSD.org>
  *  Philippe Audeoud <jadawin@tuxaco.net>
  *  Pierre-Paul Lavoie <ppl@nbnet.nb.ca>
  *  Piotr Kubaj <pkubaj@FreeBSD.org>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Radim Kolar
  *  Ralf Becker <ralf@akk.org>
  *  Raymond Pasco <ray@cultofray.net>
  *  Robert Gogolok <gogo@cs.uni-sb.de>
  *  Rozhuk Ivan <rozhuk.im@gmail.com>
  *  Rusmir Dusko <nemysis@FreeBSD.org>
  *  Ryo MIYAMOTO
  *  Sakai Hiroaki <sakai@miya.ee.kagu.sut.ac.jp>
  *  Sakai Hiroaki <sakai@seki.ee.kagu.sut.ac.jp>
  *  Satoshi Asami <asami@FreeBSD.org>
  *  Sean Bruno
  *  Sean Farley <sean-freebsd@farley.org>
  *  Seiichirou Hiraoka
  *  Seiichirou Hiraoka <flathill@flathill.gr.jp>
  *  Sergey Akifyev
  *  Shaun Amott <shaun@inerd.com>
  *  Shinya Esu <esu@yk.rim.or.jp>
  *  Simon Barner <barner@gmx.de>
  *  Stas Timokhin <devel@stasyan.com>
  *  Stas Timokhin <stast@bsdportal.ru>
  *  Stefan Eggers <seggers@semyam.dinoco.de>
  *  Stefan Esser <se@FreeBSD.org>
  *  Stefan Farfeleder <e0026813@stud3.tuwien.ac.at>
  *  Stefan Jahn <stefan.jahn@nemesis-sektor.de>
  *  Stefan Zehl <sec@42.org>
  *  Stephen Hurd <shurd@FreeBSD.org>
  *  Steve Wills <swills@FreeBSD.org>
  *  Steven H. Samorodin (samorodi@NUXI.com)
  *  Steven Wallace <swallace@FreeBSD.org>
  *  Sugimoto Sadahiro <ixtl@utmc.or.jp>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Sven Moeller <smoeller@nichthelfer.de>
  *  TAKAHASHI Kaoru <kaoru@kaisei.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Tatsuya Kuidoh <cdr@ga.xdsl.ne.jp>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Thomas Vogt <thomas.vogt@bsdunix.ch>
  *  Tobias Gion
  *  Tobias Rehbein <tobias.rehbein@web.de>
  *  Toru YANO <toru@s-fine.co.jp>
  *  Travis Poppe <tlp@liquidx.org>
  *  UMENO Takashi
  *  UMENO Takashi <umeno@rr.iij4u.or.jp>
  *  Vanilla I. Shu <vanilla@MinJe.com.TW>
  *  Vasily Postnicov <shamaz.mazum@gmail.com>
  *  Vladimir Kondratiev <wulf@cicgroup.ru>
  *  Will Andrews <andrews@technologist.com>
  *  Wouter Reckman <gennerate@zonnet.nl>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yinghong Liu <relaxbsd@gmail.com>
  *  Yinghong.Liu <relaxbsd@gmail.com>
  *  Yonatan <onatan@gmail.com>
  *  Yuichi Narahara
  *  Yukihiro Nakai <Nakai@Mlab.t.u-tokyo.ac.jp>
  *  Yukihiro Nakai <nakai@FreeBSD.org>
  *  Yukihiro Nakai <nakai@mlab.t.u-tokyo.ac.jp>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  aaron@FreeBSD.org
  *  ada@bsd.org
  *  alepulver
  *  arved
  *  asami
  *  ayu <ayunyan@gmail.com>
  *  benlutz@datacomm.ch
  *  buratello@easy.com
  *  chinsan
  *  chinsan <chinsan.tw@gmail.com>
  *  chris_pressey@yahoo.ca
  *  driedfruit
  *  edwin@mavetju.org
  *  eivind
  *  elfrink@introcom.nl
  *  erich@FreeBSD.org
  *  ericyu@mail2000.com.tw
  *  glewis@FreeBSD.org
  *  gmarco@giovannelli.it
  *  gurkan@phys.ethz.ch
  *  ijliao
  *  issei <issei@jp.FreeBSD.org>
  *  jamie
  *  janek
  *  janos.mohacsi@bsd.hu
  *  jkh
  *  jmacd
  *  jmz
  *  joerg
  *  joerg@FreeBSD.org
  *  johans
  *  johnh@isi.edu
  *  jseger@scds.com
  *  krion@FreeBSD.org
  *  kris@FreeBSD.org
  *  lightside <lightside@gmx.com>
  *  loader <loader@freebsdmall.com>
  *  marina@surferz.net
  *  markand
  *  markm
  *  mdodd
  *  mek
  *  michael johnson <ahze@ahze.net>
  *  minter@lunenburg.org
  *  nbm
  *  neuroworker@gmail.com
  *  nox@jelal.kn-bremen.de
  *  pat@databits.net
  *  petef@FreeBSD.org
  *  pgs (original)
  *  proff
  *  pypt
  *  refugee
  *  roam@FreeBSD.org
  *  se
  *  searle
  *  sec@42.org
  *  simonm@dcs.gla.ac.uk
  *  steve farrell
  *  swallace
  *  thierry@pompo.net
  *  tmartin@andrew.cmu.edu
  *  verm@drunkmonk.net
  *  will
  *  xaa@stack.nl

With hat:	portmgr

    d56127b

16:03 Yuri Victorovich (yuri) 

audio/jack: Update to Jack2: 0.125.0 -> 1.9.16

Big thank you to Florian Walpen <dev@submerge.ch> and
Goran Mekić <meka@tilda.center> for working on Jack2.

PR:		251125
Submitted by:	Florian Walpen <dev@submerge.ch> (original version)

    5708ae4

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

12:39 tobik 

Add USES={gl,gnome,mate,sdl,xorg} missed in the last round

 

14:16 tobik 

Do not set CLIENTS?_USES twice

Also drop misspelled CLIENTS_VERS in games/quakeforge.  It probably
was meant to be CLIENTS_VARS but the port does not use Gtk so
INSTALLS_ICONS=yes should not be set anyway.

 

22:21 zeising 

Add USES=xorg USES=gl, ports categories e and g

Add USES=xorg and USES=gl to ports in categories starting with 'e' and 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

 

20:46 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

 

14:12 rene 

games/quakeforge: remove optional dependency on expired multimedia/xmms

 

01:35 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

 

16:12 emaste 

Add -znotext to LDFLAGS on i386, for lld

These ports link some non-PIC code, which fails with lld as it defaults
to disallowing relocations against read-only segments.  For i386 we can
just add -znotext unconditionally: for GNU BFD ld it just affirms BFD's
existing default.

PR:		214864
Approved by:	portmgr (lld blanket)
Sponsored by:	The FreeBSD Foundation

 

22:18 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

 

20:55 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

 

05:03 rezny 

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

 

14:16 amdmi3 

- Fix shebangs
- Add missing python dependency

 

15:23 gerald 

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

 

09:38 gerald 

Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

In particular that is ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.

 

13:43 mat 

Update to 0.7.2

PR:		209296
Submitted by:	tkato432 yahoo com
Sponsored by:	Absolight

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

16:20 amdmi3 

Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket

 

14:30 amdmi3 

Remove support for WANT_SDL/HAVE_SDL knobs

WANT_SDL/HAVE_SDL macros allowed a port to check which SDL components
are installed. This goes against the policy of avoiding automatic
dependencies, and there are actually no cases in the portstree where
these knobs are used properly, so axe them out.

Approved by:	portmgr (mat)
Differential Revision:	D4093

 

20:54 bapt 

Bump portrevision after png update

 

19:04 antoine 

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

 

06:31 amdmi3 

- Clarify LICENSE
- Add LICENSE_FILE
- Drop @dirrm* from plist

 

16:48 tijl 

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.
The ports install a symlink with the old library version.  When enough
of their dependent ports have had regular updates the remaining ones can
get a PORTREVISION bump and the links can be removed.

Also remove the devel/pcre dependency from USE_GNOME=glib20.  It causes
over 2200 packages to depend on devel/pcre while less than 200 actually
link with it.  The glib20 package still depends on devel/pcre so this
should not make a difference for ports with USE_GNOME=glib20.  Also,
libdata/pkgconfig/glib-2.0.pc lists pcre as a private library so
USE_GNOME=glib20 should not propagate it.

PR:		195724
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

11:06 tijl 

- Convert to USES=libtool and add INSTALL_TARGET=install-strip
- Stop trying to build libQFrenderer_sw as a shared library.  The library
  contains x86 asm that does not support PIC.  It looks like this asm can
  be disabled by adding -DPIC to the command line but doing so leads to
  build errors.

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

13:25 danfe 

In preparation to update QuakeForge to the latest version, unbreak, stagify,
and clean up the port beforehand:
- Require compiler that supports nested functions
- Do not enable extra compiler optimizations by default; they're known to be
  the cause of sporadic build and run-time failures
- Make snd_oss actually work: mmap()ped buffer for the DMAing into /dev/dsp
  was set up incorrectly.  FreeBSD always requires MAP_SHARED for device
  mappings
- Remove vestiges of Tier-2 (sparc64) and dropped (alpha) arch gimmicks
- Define LICENSE (GPLv2), miscellaneous cleanups
- Transfer maintainership to games@ while here as well

Submitted by:	kib (sound fix)

 

10:01 bapt 

Reset maintainership for non staged ports

With hat:	portmgr

 

08:05 bapt 

Fix non default LIB_DEPENDS

With hat:	portmgr

 

14:35 miwi 

- Convert gmake, bzip to USES

Approved by:	portmgr

 

17:36 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
games)

 

11:32 bapt 

Convert USE_BISON to USES= bison

It brings bison as a build dependency in case it is set the following way:
USES= bison or USES= bison:build

it brings bison as a run dependency in case it is set the following way:
USES= bison:run

it brings bison both as a run and build dependency in case it the set the
following way:
USES= bison:both

While here trim some headers
Convert some USE_GNOME= gnomehack to USES= pathfix

 

10:18 mva 

- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions

Tested by:      exp-run by pav

16:47 danfe 

Bring unmaintained Quake ports under my wing.

04:54 tabthorpe 

- Reassign ports to heap

Submitted by:   alepulver

07:34 ade 

Sync to new bsd.autotools.mk

20:44 naddy 

Bump PORTREVISION for ports that depend on libogg, directly or indirectly
(via libvorbis, libtheora).

00:23 amdmi3 

- Switch SourceForge ports to the new File Release System: categories starting
with G

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

21:26 naddy 

Bump PORTREVISION after libogg and libvorbisfile major version increment.

16:28 flz 

- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).

06:18 rafan 

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)

17:56 miwi 

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

14:28 miwi 

- Chase devel/sdl12 shlib version bump

10:13 ade 

Migration from bison 1.x to 2.x

PR:             117086
Tested by:      -exp runs

12:27 miwi 

- Chase increase of audio/libvorbis shlib version.
- Bump PORTREVISION

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

02:42 kris 

Use libtool port instead of included version to avoid objformat a.out botch

21:32 alepulver 

- Correctly disable the use of installed libraries if not selected in OPTIONS.

21:12 alepulver 

- Fix clients statically linked to libQFrenderer_sw being unable to load
  console_client.so (the game menus) by making it a dynamic library [1].
- Change INSTALLS_SHLIB to USE_LDCONFIG.
- Remove STATIC_PLUGINS option.
- Bump PORTREVISION.

Reported by:    scalopus@gmail.com
Obtained from:  https://bugzilla.altlinux.org/show_bug.cgi?id=8853 [1]

11:21 stas 

 - Update devel/sdl12 to version 1.2.11. Now we employ stock SDL directory
   structure (i.e. include/SDL for includes and sdl-config for configuration
   binary)
 - Update graphics/sdl_ttf to version 2.0.8
 - Update graphics/sdl_image to version 1.2.5
 - Update audio/sdl_mixer to version 1.2.7
 - Update net/sdl_net to version 1.2.6
 - Update Mk/bsd.sdl.mk accordingly
 - Fix dependent ports to fit the new directory structure and avoid several
   API breakages
 - Bump up portrevisions for all dependent ports to allow them to be upgraded
   by portupgrade/portmaster etc tools

Approved by:    kris (portmgr), sem (mentor)

22:15 alepulver 

- Use NOT_FOR_ARCHS instead of BROKEN on sparc64.
- Remove USE_REINPLACE.
- Add pkg-message (processed by SUB_FILES).
- Run ldconfig on the right directory.
- Fix OPTIONS handling.
- Remove unavoidable autodetection of OPTIONS.
- Don't remove the shared data directory (managed by games/quake-data).

PR:             ports/93729
Submitted by:   Alejandro Pulver <alejandro@varnet.biz>
Approved by:    garga (mentor)

13:08 alepulver 

Change the maintainership address to the @FreeBSD.org one.

Approved by:    garga (mentor)

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

21:58 edwin 

[patch] games/quakeforge does not respond to keyboard input

        After ports recompilation for 6.0 (upgrade from 5-STABLE)
        I noticed that quakeforge start and plays the demo, but
        completely ignores any keyboard input.  Besides that, it
        reports that plugin /usr/local/lib/quakeforge/console_client.so
        cannot be loaded.

        Investigation had shown that the plugin is used to drive
        the game menu, and the reason it cannot be loaded is that
        the main executable of the game does not export the symbol
        Key_Progs_Init.

        Symbol is absent since build links final exe from some
        static libraries, and .o with Key_Progs_Init is (for some
        reasons) not referenced by exe.  As a workaround, I propose
        to add an explicit reference for the symbol.

        Proper fix would be something like -Wl,--whole-archive
        switch for final link, but this does not work due to libtool
        only allows to put switches at the start of the command
        line. And cc links libgcc.a twice, that leads to duplicate
        symbol definitions.

PR:             ports/89065
Submitted by:   Kostik Belousov <kostikbel@gmail.com>
Approved by:    Alejandro Pulver <alejandro@varnet.biz>

10:20 barner 

Pass maintainership to alejandro@varnet.biz.

Submitted by:   Ulrich Spoerlein <q@galgenberg.net> (old maintainer)
PR:             ports/89105

20:55 edwin 

[UPDATE] games/quakeforge: minor changes, integrate with "games/quake-data"

        Changes:
        * Integrate with "games/quake-data".
        * Change PORTNAME to lower-case.
        * Add OPTIONS.
        * Add LDCONFIG_DIRS.
        * Remove SVGA client, pkg-message and patch (it doesn't work, as noted
in pkg-message).

(also SHA256 and maintainer change)

PR:             ports/86175
Submitted by:   Alejandro Pulver <alejandro@varnet.biz>
Approved by:    Ulrich Spoerlein <q@galgenberg.net>

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

14:47 pav 

- Add WITH_STATIC_PLUGINS, requested by Jurij Ivliev <yury@black.cat.kazan.su>
- Remove WITHOUT_TOOLS and WITHOUT_SERVERS

PR:             ports/80940
Submitted by:   Ulrich Spoerlein <q@galgenberg.net> (maintainer)

20:17 thierry 

Change maintainer address.

PR:             ports/80973
Submitted by:   Ulrich Spoerlein <q (at) galgenberg.net>

03:26 obrien 

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

08:04 obrien 

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

19:50 pav 

- Update to 0.55

PR:             ports/70711
Submitted by:   Ulrich Spoerlein <q@uni.de> (maintainer)

17:43 marcus 

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

09:13 kris 

BROKEN on sparc64: Does not compile

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

01:01 edwin 

Properly use SDL everywhere:
        USE_SDL=yes     -> USE_SDL=sdl  (good examles everywhere)
        WANT_SDL/HAVE_SDL instead of exists(localbase/lib/lib...)

See
http://www.freebsd.org/doc/en_US.ISO8859-1/books/porters-handbook/using-sdl.html
for more information on how to use USE_SDL, WANT_SDL and HAVE_SDL.

PR:             follow-ups of ports/55494, ports/61877
Submitted by:   Edwin Groothuis <edwin@mavetju.org>

05:21 marcus 

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

20:39 pav 

- Fix the detection of libvorbis (broken, due to version bump)
- Fix a bug in the network code, found by Vladimir Machulsky
- Use DOCSDIR
- Bump PORTREVISION

PR:             ports/61902
Submitted by:   Ulrich Spoerlein <q@uni.de> (maintainer)

21:18 krion 

- Use new knobs from bsd.sdl.mk

Approved by:    portmgr

16:37 naddy 

Catch up with libogg/libvorbis version bump.

16:01 tom 

Minor change:  Remove a redundant warning and fix a typo.

23:44 edwin 

Chase multimedia/xmms library bump.

Submitted by:   FUJISHIMA Satsuki <sf@FreeBSD.org>
Approved by:    (unbreak of port builds)

13:23 netchild 

Update to 0.5.4.

Submitted by:   maintainer

14:19 daichi 

Unbreak games/quakeforge on 5.1/alpha

PR:             53757
Submitted by:   Ulrich Spoerlein <q@uni.de> (mainttainer)

10:15 netchild 

 - change maintainer to q@uni.de (this time for sure)
 - add patch for zpak (use sh instead of bash)

Submitted by:   q@uni.de

 - bump portrevision due to change in package (zpak)

04:01 anholt 

Fix fetching of quakeforge distfiles.

Approved by:    portmgr

22:53 kris 

Use pre-everything:: instead of pre-everything: to avoid conflict with
targets in bsd.port.mk

17:32 knu 

De-pkg-comment.

09:28 netchild 

Update to 0.5.2.

Give maintainership to Ulrich Spoerlein <q@uni.de> from ports.

Submitted by:   Ulrich Spoerlein <q@uni.de>

15:06 sobomax 

Update version number of SDL shared library.

16:41 alane 

Fixed to build with new stricter auto* rules.

Approved by:    kris

03:10 adamw 

Fix PORTCOMMENTs that were killing INDEX builds.

105 pointy hats to:     me
Approved by:            pat

13:25 pat 

Reset maintainership.

PR:             39519
Submitted by:   Daniel O'Connor <darius@dons.net.au> (previous maintainer)

14:59 sobomax 

- Fix the build broken by the last autoconf/automake overhaul;
- use devel/sdl12 instead of devel/sdl10 because the latter is doomed for
  death.

01:10 pat 

Fix automake problems    

10:53 knu 

Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command;   the ECHO
macro is set to "echo" by default, but it is set to "true" if   make(1) is
invoked with the -s option while ECHO_CMD is always set to   the echo command.  
 

06:57 will 

Force use of autoconf 2.13.    

06:20 will 

First round of auto* cleanups:    - USE_AUTO* -> USE_AUTO*_VER=* where required 
  - USE_AUTO* / *_DEPENDS=.*auto*:*/devel/auto* -> GNU_CONFIGURE where OK    -
Other minor changes to fix things    

12:53 sobomax 

Fix the port: GNU autoheader now called `autoheader213', not just  
`autoheader'.    

09:19 obrien 

Explicity run aclocal and autoheader    

18:51 sobomax 

Unbroke.    

23:53 ade 

Replace explicit build dependency on automake with USE_AUTOMAKE knob    

12:55 sobomax 

Move:   devel/sdl --> devel/sdl10   devel/sdl-devel --> devel/sdl12    

16:55 sobomax 

Respect SDL_CONFIG like others SDL-based ports do.    

17:33 sobomax 

Massive style enforcement - use ^I instead of spaces for variables identation.  
 

11:23 asami 

Change PKGDIR from pkg/ to .  Also fix places where ${PKGDIR} is   spelled out
(many of which are ${PKGDIR}/MESSAGE -> ${PKGMESSAGE} type   fixes that
shouldn't have been necessary) and the string "/pkg/"   appear.    

02:28 asami 

Move PLIST.* to pkg-plist.*.