01:51 linimon 

Fix up Makefiles for ports that used to fetch from www.sourcefiles.org.
It is gone.

While here, chase other mastersites, pet portlint, and set DEPRECATED
for ports that do not fetch from alternative sites.

Note: most of these ports are ancient and unmaintained.

 

10:48 mat 

Cleanup after removal of libexecinfo from ports.

PR:		220271
Submitted by:	mat (review), Yasuhiro KIMURA (PR)
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D11488

 

10:48 mat 

Remove USES=execinfo.

PR:		220271
Submitted by:	mat (review), Yasuhiro KIMURA (PR)
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D11488

 

15:30 arved 

Make fetchable

PR:		210033
Submitted by:	lightside@gmx.com

 

16:44 antoine 

Deprecate ports broken for more than 6 months

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

16:20 amdmi3 

Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket

 

12:59 antoine 

Mark a few ports BROKEN: unfetchable

 

18:33 antoine 

Convert to USES=jpeg

 

17:51 amdmi3 

- Clarify LICENSE
- Add LICENSE_FILE
- Strip binary

 

17:55 pawel 

- Switch to USES=execinfo
- Cleanup pkg-plist

 

20:54 bapt 

Bump portrevision after png update

 

19:04 antoine 

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

 

22:29 gahr 

- Reset maintainership of my ports

 

16:48 tijl 

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.
The ports install a symlink with the old library version.  When enough
of their dependent ports have had regular updates the remaining ones can
get a PORTREVISION bump and the links can be removed.

Also remove the devel/pcre dependency from USE_GNOME=glib20.  It causes
over 2200 packages to depend on devel/pcre while less than 200 actually
link with it.  The glib20 package still depends on devel/pcre so this
should not make a difference for ports with USE_GNOME=glib20.  Also,
libdata/pkgconfig/glib-2.0.pc lists pcre as a private library so
USE_GNOME=glib20 should not propagate it.

PR:		195724
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

23:30 adamw 

Add DOCS to OPTIONS for ports that have PORTDOCS in the plist.

 

22:03 amdmi3 

- Switch to USES=libtool, drop .la files
- Convert USE_BZIP2 to USES

Approved by:	portmgr blanket

 

18:28 zeising 

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)

 

05:04 danfe 

- Stagify, drop indefinite article from COMMENT, modernize LID_DEPENDS syntax
- Remove the check for a long-time unsupported "alpha" architecture
- Check if libexecinfo.so is available in the base; convert USE_GMAKE, etc.

 

17:36 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
games)

 

05:26 dinoex 

- update png to 1.5.10

10:18 mva 

- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions

Tested by:      exp-run by pav

21:29 crees 

Add LICENSE data.

PR:             ports/149564 (based on)
Submitted by:   Ullrich Franke <uf@raindogs.org>
Approved by:    [no objections from maintainers in four weeks]

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

07:34 ade 

Sync to new bsd.autotools.mk

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

11:46 dinoex 

- update to jpeg-8

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

11:11 dinoex 

- update to jpeg7
Tested by:      pav on pointyhat

20:36 pav 

- Remove conditional checks for FreeBSD 5.x and older

06:18 rafan 

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)

14:28 miwi 

- Chase devel/sdl12 shlib version bump

15:56 gahr 

- Remove USE_XPM in favor of USE_XORG

Approved by:    miwi (mentor)

21:20 gahr 

My reference e-mail address as a ports maintainer is now gahr@FreeBSD.org.

Approved by:    miwi (mentor)

19:08 miwi 

- Fix build with gcc 4.2
- Pass maintainership to submitter

PR:             118633
Submitted by:   Pietro Cerutti <gahr@gahr.ch>

22:53 kris 

BROKEN with gcc 4.2

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

02:42 kris 

Use libtool port instead of included version to avoid objformat a.out botch

11:21 stas 

 - Update devel/sdl12 to version 1.2.11. Now we employ stock SDL directory
   structure (i.e. include/SDL for includes and sdl-config for configuration
   binary)
 - Update graphics/sdl_ttf to version 2.0.8
 - Update graphics/sdl_image to version 1.2.5
 - Update audio/sdl_mixer to version 1.2.7
 - Update net/sdl_net to version 1.2.6
 - Update Mk/bsd.sdl.mk accordingly
 - Fix dependent ports to fit the new directory structure and avoid several
   API breakages
 - Bump up portrevisions for all dependent ports to allow them to be upgraded
   by portupgrade/portmaster etc tools

Approved by:    kris (portmgr), sem (mentor)

23:06 clsung 

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include dns/ editors/ emulators/ finance/
  games/ graphics/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

20:51 jylefort 

- Update to 0.2.4 [1]
- Improve pkg-message/COMMENT grammar

[1]:
PR:             ports/82673
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

19:56 oliver 

change the libtool version to use from 1.3 to 1.5

17:43 marcus 

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

04:23 edwin 

Chase library bump of libSDL-1.1 for all ports which were depending
on sdl12-1.2.5

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

01:01 edwin 

Properly use SDL everywhere:
        USE_SDL=yes     -> USE_SDL=sdl  (good examles everywhere)
        WANT_SDL/HAVE_SDL instead of exists(localbase/lib/lib...)

See
http://www.freebsd.org/doc/en_US.ISO8859-1/books/porters-handbook/using-sdl.html
for more information on how to use USE_SDL, WANT_SDL and HAVE_SDL.

PR:             follow-ups of ports/55494, ports/61877
Submitted by:   Edwin Groothuis <edwin@mavetju.org>

08:06 kris 

BROKEN on alpha 5.x: Configure fails

05:21 marcus 

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

12:18 trevor 

Use the CPIO macro defined in bsd.port.mk.

11:04 edwin 

Chase up new MASTER_SITE_SAVANNAH.

PR:             ports/56970
Submitted by:   Jean-Yves Lefort <jylefort@brutele.be>

07:56 krion 

Update to 0.2.3

PR:             55242
Submitted by:   Ports Fury

13:33 daichi 

update games/adgali: 0.1.0 --> 0.2.2

PR:             53580
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

17:32 knu 

De-pkg-comment.

15:06 sobomax 

Update version number of SDL shared library.

02:50 ijliao 

Replace ${PERL} with ${REINPLACE_CMD}

PR:             40012
Submitted by:   Oliver Braun <obraun@informatik.unibw-muenchen.de>

12:38 sobomax 

Chase increase of libSDL version number.

11:16 sobomax 

Adjust in accordance with the new location of freetype1 includes
(${PREFIX}/include/freetype1/freetype, not ${PREFIX}/include/freetype).

21:46 jim 

Add USE_LIBTOOL and respect CFLAGS.    

02:05 petef 

Add a dependancy on libgnugetopt    

10:51 ijliao 

add adgali   An open source game library useful for 2D games programmation