| non port: french/med/Makefile |
|
SVNWeb
|
Number of commits found: 82 |
|
Sun, 23 Apr 2023
|
[ 09:09 Gerald Pfeifer (gerald)  ]    8d3e020 (Only the first 10 of 2091 ports in this commit are shown above.  )
*: Bump PORTREVISIONs for math/mpc update to 1.3.1
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:35 Tobias C. Berner (tcberner) ] 5564b3b (Only the first 10 of 87 ports in this commit are shown above. )
science/hdf5: bump PORTREVISION of consumers
The SO-version increased in the update to 1.12.2 in
a43418b81530f7e897abfbe18dd59f44265a1a0f .
Reported by: VVD <vvd@unislabs.com>
|
[ 14:21 Tobias C. Berner (tcberner) ] 0c7138c
french: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Andreas Fehlner (fehlner@gmx.de)
* Dan Phillips <dan-ports@dp.id.au>
* Elvis Chiang <elvis@sslab.cs.ccu.edu.tw>
* Frederic Culot <frederic@culot.org>
* Thierry Thomas <thierry@pompo.net>
* janos.mohacsi@bsd.hu
* thierry@pompo.net
With hat: portmgr
|
|
Mon, 18 Jul 2022
|
[ 12:50 Po-Chuan Hsieh (sunpoet) ] 295de93
french/med: Change LIB_DEPENDS from hdf5 to hdf5-110
- Bump PORTREVISION for dependency change
|
|
Thu, 16 Jun 2022
|
[ 15:13 Po-Chuan Hsieh (sunpoet) ] 014002e
french/med: Fix build with HDF5 1.10.8+
- While I'm here, use sed from basd system instead of gesed from ports
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Mon, 23 Dec 2019
|
[ 20:10 thierry ]   (Only the first 10 of 21 ports in this commit are shown above. )
Upgrade Code_Aster to 14.4.0-1.
PR: 242655
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Mon, 22 Apr 2019
|
[ 13:16 gerald ] (Only the first 10 of 225 ports in this commit are shown above. )
Related to revision 499061 bump ports with USES=fortran to have them
benefit from the improved situation where libgcc_s is only used when
absolutely necessary.
Suggested by: tijl
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
|
Thu, 8 Nov 2018
|
[ 20:55 thierry ]
Upgrade science/hdf5-18 to 1.8.21.
Release notes at:
<https://portal.hdfgroup.org/display/HDF5/Software+Changes+from+Release+to+Release+for+HDF5-1.8#SoftwareChangesfromReleasetoReleaseforHDF5-1.8-Release1.8.21ofMay2018versusRelease1.8.20>
PR: 233071
Submitted by: wenheping2000 (at) hotmail.com (Original maintainer)
|
|
Sat, 18 Aug 2018
|
[ 08:51 thierry ]
Upgrade Code_Aster to 13.6.0-1.
|
|
Sun, 29 Jul 2018
|
[ 22:18 gerald ] (Only the first 10 of 1480 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
|
|
Thu, 7 Jun 2018
|
[ 08:34 amdmi3 ]
- Switch to new test framework
- Switch to options helpers
Approved by: portmgr blanket
|
|
Sat, 10 Mar 2018
|
[ 17:46 gerald ] (Only the first 10 of 1104 ports in this commit are shown above. )
Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).
|
|
Sun, 28 Jan 2018
|
[ 15:55 thierry ]
Fix build on head.
Reported by: packages cluster
|
|
Sun, 3 Dec 2017
|
[ 15:14 thierry ]
Upgrade HDF5 to 1.8.20.
Release notes at
https://support.hdfgroup.org/ftp/HDF5/releases/hdf5-1.8/hdf5-1.8.20/src/hdf5-1.8.20-RELEASE.txt
|
|
Tue, 14 Nov 2017
|
[ 18:29 thierry ] (Only the first 10 of 59 ports in this commit are shown above. )
Upgrade - endly! - to Code_Aster 13.4.0-3.
Notes:
- I have (not yet) succeeded to enable MFront in this version;
- it uses math/mumps-edf, repocopied from math/mumps;
- cad/scotch is now taken out of the aster tarball;
- french/eficas is no more used: to be replaced by "aster-study" in Salome_Meca
(the port cad/salome should be resurrected!)
|
|
Sun, 10 Sep 2017
|
[ 20:55 gerald ] (Only the first 10 of 1201 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
|
|
Sat, 17 Jun 2017
|
[ 09:48 thierry ]
Upgrade science/hdf5-18 to 1.8.19.
Changelog at
<https://support.hdfgroup.org/HDF5/doc1.8/ADGuide/Changes.html#1819>.
|
|
Sat, 1 Apr 2017
|
[ 15:23 gerald ] (Only the first 10 of 1118 ports in this commit are shown above. )
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
|
|
Wed, 7 Dec 2016
|
[ 13:24 gerald ] (Only the first 10 of 227 ports in this commit are shown above. )
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.
The first part covered ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.
PR: 214965
Reported by: thierry
|
|
Sun, 13 Nov 2016
|
[ 12:44 thierry ] (Only the first 10 of 27 ports in this commit are shown above. )
Upgrade Code_Aster to 12.0.6-4.
This brings french/eficas to 2016.0.1,
cad/astk-serveur and astk-client to 1.13.8.2,
french/med to 3.2.0 (built against hdf5-18),
bump PORTREVSION to math/metis-edf and fix soname,
and french/homard to 11.7-1.
|
|
Wed, 20 Apr 2016
|
[ 20:42 sunpoet ] (Only the first 10 of 32 ports in this commit are shown above. )
- Update to 1.10.0
- Add LICENSE_FILE
- Remove outdated PORTSCOUT
- Re-enable SZIP option by default: it was changed unintentionally in r398300
Changes: https://www.hdfgroup.org/ftp/HDF5/releases/hdf5-1.10/hdf5-1.10.0/src/hdf5-1.10.0-RELEASE.txt
https://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Sun, 24 May 2015
|
[ 08:10 sunpoet ] (Only the first 10 of 27 ports in this commit are shown above. )
- Update to 1.8.15
- Bump PORTREVISION for science/hdf5 shlib change
Changes: http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.15-RELEASE.txt
http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
|
|
Wed, 18 Feb 2015
|
[ 22:06 thierry ] (Only the first 10 of 13 ports in this commit are shown above. )
Update Code_Aster to 11.7.0-1, with its different tools.
|
|
Sun, 18 Jan 2015
|
[ 10:39 sunpoet ] (Only the first 10 of 28 ports in this commit are shown above. )
- Update to 1.8.14
- Update MASTER_SITES
- Use INSTALL_TARGET=install-strip instead of
MAKE_ENV=INSTALL_STRIP_FLAG=${STRIP}
- Bump PORTREVISION for science/hdf5 shlib change
Changes: http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.14-RELEASE.txt
http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Sun, 24 Aug 2014
|
[ 07:58 amdmi3 ]
- Drop .la files, no dependees require them
Approved by: portmgr blanket
|
|
Sat, 3 May 2014
|
[ 00:55 sunpoet ] (Only the first 10 of 28 ports in this commit are shown above. )
- Update to 1.8.12 (from science/hdf5-18)
- Add LICENSE
- Convert to new LIB_DEPENDS format
- Convert to new options helper
- Use NOT_FOR_ARCHS
- Strip shared library
- Remove deprecated PTHREAD_*
- Use MAKE_CMD
- Bump PORTREVISION for science/hdf5 shlib change [1]
Changes: http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.12-RELEASE.txt
http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
Approved by: portmgr (bapt) [1]
|
|
Wed, 23 Apr 2014
|
[ 13:25 tijl ] (Only the first 10 of 462 ports in this commit are shown above. )
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
(Only the first 15 lines of the commit message are shown above )
|
|
Tue, 18 Mar 2014
|
[ 21:09 thierry ] (Only the first 10 of 31 ports in this commit are shown above. )
Upgrade Code_Aster to 11.5.0-4.
N.B.: french/aster is still marked BROKEN, but this allows to unbreak
other ports sharing the same dependencies.
Patch for french/med provided by tijl.
|
|
Mon, 10 Mar 2014
|
[ 20:55 gerald ] (Only the first 10 of 1081 ports in this commit are shown above. )
Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3. This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.
Part II, Bump PORTREVISIONs.
PR: 182136
Supported by: Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by: bdrewery (two -exp runs)
|
|
Tue, 18 Feb 2014
|
[ 08:50 gahr ]
- Convert to USES=tk
- Convert to new LIB_DEPENDS format
- STAGE-clean
|
|
Sun, 16 Feb 2014
|
[ 17:15 tijl ] (Only the first 10 of 211 ports in this commit are shown above. )
Convert all USE_FORTRAN=yes to "USES=fortran, USE_GCC=yes". In most cases
USE_GCC=yes has been omitted though.
Remove USE_FORTRAN handling from bsd.port.mk and bsd.gcc.mk.
Minor cleanups in some ports like USE_GMAKE, NOPORTDOCS,...
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
|
|
Sat, 26 Oct 2013
|
[ 00:52 gerald ] (Only the first 10 of 1147 ports in this commit are shown above. )
Update to libmpc version 1.0.1 which brings the following fixes:
- Switched to automake 1.11.6, see CVE-2012-3386.
- #14669: Fixed extraction of CC from gmp.h.
- Fixed case of intermediate zero real or imaginary part in mpc_fma,
found by hydra with GMP_CHECK_RANDOMIZE=1346362345.
This is on top of the following changes from version 1.0
- Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
invariant sections) for the documentation.
- 100% of all lines are covered by tests
- Renamed functions
. mpc_mul_2exp to mpc_mul_2ui
. mpc_div_2exp to mpc_div_2ui (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 20 Sep 2013
|
[ 17:21 bapt ] (Only the first 10 of 28 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
french)
|
|
Fri, 22 Mar 2013
|
[ 17:58 thierry ]
Fix plist.
Reported by: miwi
|
|
Tue, 19 Mar 2013
|
[ 20:33 thierry ]
Upgrade to 3.0.6.
|
|
Sat, 7 Jul 2012
|
[ 15:15 thierry ] (Only the first 10 of 41 ports in this commit are shown above. )
Upgrade Code_Aster to 10.6.0-3.
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Fri, 15 Jul 2011
|
[ 07:00 sunpoet ] (Only the first 10 of 26 ports in this commit are shown above. )
- Bump PORTREVISION for science/hdf5-18 shlib change
|
|
Sat, 26 Feb 2011
|
[ 10:23 thierry ]
Chase the upgrade of science/cgnslib to 2.5-5; this implies to
switch some dependencies from science/hdf5 to science/hdf5-18.
As a side note: I think that all ports depending on science/hdf5
could be switched to science/hdf5-18, by defining H5_USE_16_API
when necessary, and then science/hdf5 could be deprecated.
PR: ports/154736
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Sat, 16 Oct 2010
|
[ 11:52 ade ] (Only the first 10 of 445 ports in this commit are shown above. )
Punt autoconf267->autoconf268
|
|
Thu, 16 Sep 2010
|
[ 21:23 thierry ]
Chase Code_Aster's upgrade and depends on Tcl/Tk 8.5.
|
|
Wed, 15 Sep 2010
|
[ 18:35 ade ] (Only the first 10 of 652 ports in this commit are shown above. )
Autotools update. Read ports/UPDATING 20100915 for details.
Approved by: portmgr (for Mk/bsd.port.mk part)
Tested by: Multiple -exp runs
|
|
Sat, 19 Jun 2010
|
[ 15:08 thierry ]
Fix plist when NOPORTEXAMPLES is defined.
Feature safe: yes
|
|
Fri, 26 Mar 2010
|
[ 18:30 thierry ] (Only the first 10 of 13 ports in this commit are shown above. )
Upgrade to 2.3.6.
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Tue, 20 Jan 2009
|
[ 18:29 thierry ]
Chase Aster's main tarball. No change.
|
|
Wed, 14 Jan 2009
|
[ 20:25 thierry ]
- Upgrade to 2.3.5;
- Use aster's distfiles.
|
|
Sun, 24 Aug 2008
|
[ 13:04 amdmi3 ]
- Respect NOPORTDOCS, NOPORTEXAMPLES
- Fix plist
Reported by: QAT
|
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Aug 2008
|
[ 00:57 ade ] (Only the first 10 of 398 ports in this commit are shown above. )
Conversion from (now defunct) autoconf-2.61 to autoconf-2.62
Tested by: exp build run (erwin)
|
|
Wed, 23 Apr 2008
|
[ 20:50 thierry ]
Upgrade to 2.3.4.
|
|
Sun, 23 Mar 2008
|
[ 10:15 thierry ] (Only the first 10 of 19 ports in this commit are shown above. )
Upgrade to 2.3.3.
|
|
Sun, 30 Sep 2007
|
[ 04:47 linimon ] (Only the first 10 of 300 ports in this commit are shown above. )
Switch autoconf dependencies from 2.53 or 2.59 to 2.61.
PR: ports/116639
Submitted by: aDe
|
|
Sat, 14 Jul 2007
|
[ 10:02 maho ]
Now we use USE_FORTRAN=yes to use FORTRAN compiler.
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Thu, 25 Jan 2007
|
[ 22:33 thierry ]
Fix plist: since the gfortran migration, some tests are no more installed.
Reported by: pointyhat via pav
|
|
Wed, 17 Jan 2007
|
[ 06:06 maho ]
* Migrate to gfortran.
* Bump port revision.
* Always use F90.
|
|
Tue, 12 Dec 2006
|
[ 18:24 thierry ]
- Upgrade MED to 2.3.1;
- Assign better CATEGORIES;
- Support gfortran;
- Add a regression-test target.
|
|
Mon, 14 Aug 2006
|
[ 23:06 clsung ] (Only the first 10 of 81 ports in this commit are shown above. )
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include dns/ editors/ emulators/ finance/
games/ graphics/ maintained by ports@
PR: ports/101916
Submitted by: Gea-Suan Lin <gslin_AT_gslin dot org>
|
|
Wed, 7 Jun 2006
|
[ 13:33 sat ]
- Limit INDEX contents to 7-bit ASCII characters for greater compatibility
|
|
Sun, 7 May 2006
|
[ 11:09 edwin ] (Only the first 10 of 51 ports in this commit are shown above. )
Remove USE_REINPLACE from all categories starting with F
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Sat, 21 Jan 2006
|
[ 09:01 thierry ]
- Fix plist [1]
- Fix xmdump.
Reported by: pointyhat via Kris [1]
|
|
Sun, 15 Jan 2006
|
[ 23:15 thierry ]
Upgrade to 2.2.3.
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Tue, 12 Apr 2005
|
[ 03:26 obrien ] (Only the first 10 of 773 ports in this commit are shown above. )
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
|
|
Mon, 11 Apr 2005
|
[ 08:04 obrien ] (Only the first 10 of 776 ports in this commit are shown above. )
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
|
|
Mon, 17 Jan 2005
|
[ 21:08 thierry ] (Only the first 10 of 18 ports in this commit are shown above. )
Upgrade to 2.2.2.
|
|
Fri, 9 Jul 2004
|
[ 17:43 marcus ] (Only the first 10 of 489 ports in this commit are shown above. )
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
|
Wed, 28 Apr 2004
|
[ 20:30 thierry ]
Fix pkg-plist and install examples.
Noticed on dosirak & bento.
Approved by: mat (mentor).
|
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
|
Wed, 25 Feb 2004
|
[ 22:55 pav ]
Chase repomove graphics/hdf* -> science/hdf*
|
|
Wed, 4 Feb 2004
|
[ 05:21 marcus ] (Only the first 10 of 1588 ports in this commit are shown above. )
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 2)
|
|
Wed, 10 Dec 2003
|
[ 23:09 pav ] (Only the first 10 of 14 ports in this commit are shown above. )
- www.code-aster.org was reorganized. fix fetching
PR: ports/60121
Submitted by: Thierry Thomas <thierry@pompo.net>
|
|
Wed, 23 Jul 2003
|
[ 14:35 oliver ] 
Add med 2.1.5, mod?lisation et ?changes de Donn?es.
PR: 54761
Submitted by: thierry@pompo.net
|
Number of commits found: 82 |
As an Amazon Associate I earn from qualifying purchases.