19:34 Rene Ladan (rene) 

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

    3d9a815

15:58 Dmitry Marakasov (amdmi3) 

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

    77d6847

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:21 Tobias C. Berner (tcberner) 

finance: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Christopher Boumenot <boumenot@gmail.com>
  *  David Naylor <naylor.b.david@gmail.com>
  *  Dermot Tynan <dtynan@kalopa.com>
  *  Dorit Rottner (<rottner@punkt.de>)
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Eric Freeman <freebsdports@chillibear.com>
  *  Glenn Johnson <glennpj@charter.net>
  *  James FitzGibbon <jfitz@FreeBSD.org>
  *  Janky Jay <ek@purplehat.org>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Reifenberger <mr@freebsd.org>
  *  Mikhail T. <m.tsatsenko@gmail.com>
  *  Mikhail Teterin
  *  Neil Booth
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Qian Jin <eric.siroh@gmail.com>
  *  Ryan Steinmetz <zi@FreeBSD.org>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  TAKAHASHI Kaoru <kaoru@kaisei.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Trevor Caira <trevor@bitba.se>
  *  Vick Khera <vivek@khera.org>
  *  Vivek Khera <vivek@khera.org>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen heping <wenheping@gmail.com>
  *  Yen-Ming Lee <leeym@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  Zach Thompson <hideo@lastamericanempire.com>
  *  anarcat@anarcat.ath.cx
  *  chinsan
  *  courou <courou@users.sourceforge.net>
  *  ijliao
  *  lth@FreeBSD.org
  *  wcarey
  *  will

With hat:	portmgr

    302a061

21:37 Muhammad Moinur Rahman (bofh) 

finance/py-stripe: Update version 2.74.0=>2.76.0

Relnotes: https://github.com/stripe/stripe-python/releases/tag/v2.76.0

    235ae94

17:57 Muhammad Moinur Rahman (bofh) 

finance/py-stripe: Update version 2.70.0=>2.74.0

Relnotes: https://github.com/stripe/stripe-python/releases/tag/v2.74.0

    a54ca32

08:40 Muhammad Moinur Rahman (bofh) 

finance/py-stripe: Update version 2.67.0=>2.70.0

Relnotes:
https://github.com/stripe/stripe-python/blob/master/CHANGELOG.md

    2a2c74f

10:37 Muhammad Moinur Rahman (bofh) 

finance/py-stripe: Update version 2.29.4=>2.67.0

Relnotes: https://github.com/stripe/stripe-python/releases/tag/v2.67.0

    3215924

02:09 Muhammad Moinur Rahman (bofh) 

*/*: Take maintainership

    bc808e2

19:07 Rene Ladan (rene) 

all: return koobs' ports to the pool after safekeeping his commit bit.

    3d89f95

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

22:03 rene 

Simplify some ports using PYTHON_VER and Python 3.6+

 

23:02 antoine 

Drop python 2.7 support from a few ports

With hat:	portmgr

 

07:31 koobs 

finance/py-stripe: Update to 2.29.4

Changelog:

  https://github.com/stripe/stripe-python/blob/v2.29.4/CHANGELOG.md

 

09:44 koobs 

finance/py-stripe: Update to 2.29.0

Changelog:

  https://github.com/stripe/stripe-python/blob/v2.29.0/CHANGELOG.md

 

07:48 koobs 

finance/py-stripe: Update to 2.28.0

Changelog:

  https://github.com/stripe/stripe-python/blob/v2.28.0/CHANGELOG.md

 

17:05 mat 

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

04:02 koobs 

finance/py-stripe: Revert (part of) r426059

Revert r426059 which removed py-unittest2.

(1) The port was revived and (2) the change was incomplete, breaking the
test target/phase because tests were not confirmed to continue to work
(without downloading the dependency, which is not allowed in poudriere),
or updated to work without unittest2.

Removing *_DEPENDS alone for whatever reason (expiry/deletion in this case)
is insufficient for ports of Python packages, as their code may still
register, reference or attempt to import that (package) code, and fatally
error if it is not available.

Other ports modified in that revision very likely require similar
updates, if they haven't been updated or fixed already.

[1] svnweb.freebsd.org/changeset/ports/426059

 

16:14 rene 

Clean up TEST_DEPENDS, devel/py-unittest2 was removed at 2016-09-26

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

10:11 koobs 

finance/py-stripe: Update to 1.30.0

- Update PORTVERSION and distinfo checksum (1.30.0)
- Update mock in TEST_DEPENDS (now any version)
- Update setup.py patch to add tests_require for future upstreaming

Changes:

  https://github.com/stripe/stripe-python/blob/v1.30.0/CHANGELOG

 

07:18 koobs 

finance/py-stripe: Update to 1.29.1, Modernize

- Update PORTVERSION and distinfo checksum (1.29.1)
- Add LICENSE_FILE
- Update TEST depends and test target
- Update test target environment variable [1]
- Remove TESTS option bits accordingly
- Patch setup.py tests_require to allow the latest version of mock [2]
- Remove patch to setup.py:package_data (upstreamed) [3]

Changes:

  https://github.com/stripe/stripe-python/blob/v1.29.1/CHANGELOG

[1] https://github.com/stripe/stripe-python/issues/172
[2] https://github.com/stripe/stripe-python/issues/205
[3] https://github.com/stripe/stripe-python/pull/170

 

23:43 sunpoet 

- Move ftp/py-curl to ftp/py-pycurl
- Bump PORTREVISION for dependent ports

 

11:43 koobs 

finance/py-stripe: Update to 1.25.0

- Update to 1.25.0
- Switch to CHEESEHOP for distribution files (Geo-aware CDN)
- Canonicalize COMMENT (According to setup.py:description=)
- Switch to requests (2.x)
- Add TESTS option
- Update TEST_DEPENDS values and assignment
- Replace post-patch with a patch, submitted upstream [1]
- Use PYDISTUTILS_SETUP to ensure its setuptools wrapped
- Run pycurl tests that are disabled by default with this weird reverse
  logic bit of code, issue created upstream [2]

    if not os.environ.get('SKIP_PYCURL_TESTS'):
        self.skipTest('Pycurl skipped as SKIP_PYCURL_TESTS is set'

[1] https://github.com/stripe/stripe-python/pull/170
[2] https://github.com/stripe/stripe-python/issues/172

QA: Ran 195 tests in 44.446s OK (skipped=9)

 

10:58 koobs 

finance/py-stripe: Take MAINTAINER'ship

 

13:51 amdmi3 

- Add NO_ARCH

 

07:54 erwin 

Reset maintainer

<trevor@bitba.se>: Host or domain name not found. Name service error for
    name=bitba.se type=AAAA: Host not found

Sponsored by:	DK Hostmaster A/S

 

17:18 mva 

- Convert finance/ to new USES=python

Approved by:	portmgr (implicit)

 

20:32 antoine 

- Stage support
- Switch from easy_install to install

 

12:14 koobs 

Sweep www/py-requests dependants to www/py-requests1

Point all www/py-requests dependants to www/py-requests1 in preparation for
the upgrade of www/py-requests to version 2.x, which substantially breaks API
compatibility.

Maintainers of these ports can update their requests dependency independently
as time for sufficient testing permits.

PR:		ports/185631

 

07:18 koobs 

finance/py-stripe: Fix missing closing brace in TEST_DEPENDS assignment

Reported by:	jgh

 

06:44 koobs 

finance/py-stripe: Update to 1.9.8

- Update to 1.9.8

  I missed this during the initial port commit. It fixes the failing unit
  test.

Changes:

 1.9.8 2013-10-17: Removed incorrect test.
 1.9.7 2013-10-10: Add support for metadata.
 1.9.6 2013-10-08: Fix issue with support for closing disputes.

PR:		ports/182313

 

06:16 koobs 

finance/py-stripe: Python bindings for Stripe.com [NEW PORT]

Python bindings for the Stripe.com payment service REST API.

WWW: https://github.com/stripe/stripe-python

PR:		ports/182313
Submitted by:	Trevor Caira <trevor@bitba.se>