| non port: emulators/qemu-sbruno/distinfo |
|
SVNWeb
|
Number of commits found: 78 |
|
Thu, 12 Dec 2019
|
[ 18:47 kevans  ]  
emulators/qemu-user-static{,-devel}: unbreak after base r355641
r355641 added sigorset to base, which collides with sigorset in
qemu-user-static. This is effectively a patch (applied in the qemu-bsd-user
repo) that makes the qemu version private and uses that for now, until
sigorset in FreeBSD stabilizes across older branches.
Approved by: 0mp (ports)
|
|
Tue, 12 Nov 2019
|
[ 21:11 kevans ]
emulators/qemu-user-static: update to head as of 2019/11/12
With this update, sendmsg/recvmsg (thus, casper'ized) applications now work
again on mips. Various signal handling issues have also been addressed,
most notably qemu-user-static should no longer deadlock when evaluating
whether printf survives out-of-memory conditions or not.
PR: 224740
Approved by: ler (ports), sbruno (maintainer, implicit)
MFH: 2019Q4
|
|
Tue, 29 Oct 2019
|
[ 13:56 kevans ]
qemu-user-static: fix the RFSPAWN fix + kevent(2) emulation
The RFSPAWN fix included a bogus dependency on qemu-user-static being built
against headers that included the RFSPAWN flag. This is incorrect in
emulation-land, where we must assume the target may not match the host.
kevent(2) emulation was also not preserving event udata coming from the
kernel; the fix for this is als included.
Approved by: antoine (ports), sbruno (maintainer, implicit)
MFH: 2019Q4
|
|
Sun, 27 Oct 2019
|
[ 00:08 kevans ]
qemu-user-static: pull in fixes for the 2.x branch
Short list:
- __sysctlbyname(2) implemented
- posix_spawn breakage due to RFSPAWN averted
- some _umtx_op misbehavior fixed*
Some _umtx_op operations were processing a timeout, but failed to pass in
the size of the timespec/_umtx_time to the kernel, passing in '0' instead.
This would cause unbounded sleep until interrupted, rather than timeout
expected by the caller.
PR: 240763
Approved by: ler (ports), sbruno (maintainer, implicit)
MFH: 2019Q4 (runtime fix)
|
|
Tue, 30 Jul 2019
|
[ 21:14 sbruno ]
qemu-sbruno qemu-user-static update
- cleanup a stray debugging printf
- fixup for sendmsg/recvmsg
- fixup openat()
Submitted by: miki kevans
|
[ 02:46 sbruno ]
qemu-sbruno:
- fix qemu-user-static hangs with wc -l //
- add qemu-user-static redirection for riscv64, no support, yet.
Thanks to kevans, miki and others for fixing this nonsense.
Submitted by: kevans miki
|
|
Thu, 18 Jul 2019
|
[ 18:52 sbruno ]
emulators/qemu-sbruno
emulators/qemu-user-static
- Capture fix for keeping track of the thread counts being optimized.
https://github.com/seanbruno/qemu-bsd-user/commit/9ac22b222b5f3844dc303c2da2c40efd3ba67661
Submitted by: Mark Millard <marklmi at yahoo.com>
Reviewed by: kevans
|
|
Tue, 19 Mar 2019
|
[ 11:53 sbruno ]
emulators/qemu-sbruno:
- Add a "-O argv0" argument to qemu-bsd-user for use in execve() calls:
Prior to this commit, the value of argv[0] was discarded as it was
overwritten by the path to the program being executed. This commit
uses the new -0 option to retain that information; in particular,
this unbreaks mailwrapper+sendmail, which makes use of this to know
which of multiple functions should be performed.
Submitted by: cperciva
|
|
Sun, 11 Nov 2018
|
[ 17:15 sbruno ]
Bump qemu-sbruno to capture 4ef7d07
- Avoid the overflow reported by Mark Millard...New version is safer
end_addr >= addr is assured earlier in this loop.
Submitted by: kevans
Reported by: Mark Millard <marklmi@yahoo.com>
|
|
Fri, 9 Nov 2018
|
[ 18:14 sbruno ]
Incorpororate fixes to build packages after freebsd svn r339655. (kevans)
Add uname change for AARCH64. (miki)
|
|
Sat, 23 Jun 2018
|
[ 00:02 sbruno ]
qemu-user-static update:
- Increase user stack when emulating aarch64.
Submitted by: Mikael Urankar <mikael.urankar@gmail.com>
|
|
Tue, 1 May 2018
|
[ 23:35 sbruno ]
qemu-sbruno + qemu-user-static highlights:
- regen syscall list
(imp)
- Fix syscall handler for readv()
(miki)
- new syscall support for getrandom() (fixes perl/python builds)
(miki)
- cleanup some sysv-ipc detrius
(brooks)
|
|
Sun, 11 Feb 2018
|
[ 19:56 brooks ]
Update to the latest on github.
Clean up distfile handling.
Suppress unimportant and very noisy warnings in qemu-user-static.
PR: 225831
Approved by: sbruno (maintainer)
Sponsored by: DARPA, AFRL
|
|
Sun, 17 Dec 2017
|
[ 00:14 sbruno ]
emulators/qemu-sbruno
emulators/qemu-user-static
Update to 2.11.50 + patches from submitters. Upstream introduced some git
nonsense with remotes inside their repos. Change the way we fetch our
distributions with GH_TUPLE instead of the previous way. Clean up a couple
lines commented out for the PCAP features that aren't stored in a patch, but
merely direct committed to this tree.
- Remove the interpreter name and interpreter prefix when retrieving the
argument vectors using kvm_getargv (Mikael Urankar)
- No need to check msg_controllen: msg_controllen can have the value 0 and
the kernel discards negative value (Mikael Urankar)
- Implement/modify kevent64 related syscalls. (Mikael Urankar)
- Implement ktimer_{create, delete, settime, gettime} (Mikael Urankar)
- Stop using basename_r(3). Fix build after FreeBSD svn r326719 (Ed Shouten)
Changelogs can be found at https://github.com/seanbruno/qemu-bsd-user
PR: 224016
|
|
Tue, 24 Oct 2017
|
[ 16:44 sbruno ]
Fix build on FreeBSD 10. (cpm@)
Fix sendmsg/recvmsg emulation. (Michal Melon)
|
|
Fri, 20 Oct 2017
|
[ 21:28 sbruno ]
Update to capture some feature fixes:
Sync do_altsigstack with linux-user (mikael urankar)
Implement UMTX_OP_SHM mutex operations (michal meloun)
|
|
Thu, 12 Oct 2017
|
[ 16:31 sbruno ]
Repair a lock order reversion and remove mmap_fork_end() from fork_end()
Submitted by: Michal Meloun <mmel@freebsd.org>
|
|
Fri, 25 Aug 2017
|
[ 22:53 sbruno ]
Bump qemu-sbruno to chase qemu release candidates.
Add redirection for "armv7" so the poudriere can be tested for this
target when its ready.
Fix bsd-mem.h do_obreak() to invoke an mmap() with a proper -1 argument
for the fd argument.
Submitted by: Mikael Urankanar <mikael.urankar@gmail.com>
|
|
Fri, 21 Jul 2017
|
[ 21:15 sbruno ]
Update host kernel signal state when using sa_sigaction.
Merge linux-user change to allocate heap memory for execve args.
Submitted by: Mikael Urankanar <mikael.urankar@gmail.com>
|
|
Mon, 17 Jul 2017
|
[ 19:38 sbruno ]
Sync to QEMU for today.
Switch to using sysutils/dtc for libfdt with qemu-sbruno, remove
use of nox's homedir for providing dtc/libfdt and remove it as
a build depend in the qemu-user-static path if it was even being
built.
|
|
Tue, 11 Jul 2017
|
[ 20:03 sbruno ]
Bump after pull requests.
- add strace logging for new syscalls after ino64 update
- sync mmap() code with linux-user
- implement posix_fallocate()
-- this should help building aarch64 ports a bit.
- tcg: add handling for EXCP_ATOMIC
Submitted by: Mikael Urankanar <mikael.urankar@gmail.com>
|
|
Fri, 7 Jul 2017
|
[ 21:01 sbruno ]
Bump for today's pull request:
Change certain bits of mmap.c to check for the fd that is passed into
mmap() for the value -1 instead of MAP_ANONYMOUS. This should be much
more reliable as we will avoid doing an mmap() of -1. :-)
Also include sys/param.h in mmap.c to capture __FreeBSD_version so that
MAP_GUARD code is actually run on versions that support it.
https://github.com/seanbruno/qemu-bsd-user/pull/45
Submitted by: Guy Yur
|
[ 14:14 sbruno ]
Bump qemu-sbruno/qemu-user-static to capture fixes that are now required
in -current in support of mmap() MAP_GUARD.
Thanks to kib@ for the explanations and test program that I used to
come up with a solution.
While here, sync to upstream a bit. This requires a little bit of a
fixup for NODOC builds.
|
|
Mon, 12 Jun 2017
|
[ 14:35 sbruno ]
Update qemu-sbruno and qemu-user-static to 2.9.50
- Fix handling of ino64 changes in head (Michal Meloun)
- Don't return 0 if pending signal is detected before call to real select().
This causes cmake timeout failures - a select() with NULL as
timeout argument returns (erroneously) 0. (Michal Meloun)
- Allow users to compile bsd-user dynamically (Michal Meloun)
|
|
Tue, 7 Mar 2017
|
[ 18:44 sbruno ]
Disable FPU on 32 bit mips. This will cause some additional breakage in
pkg building on mips. Some ports errneously try and use FPU instructions
and will insta-crash when run on real hardware. This change will identify
those ports that have these types of instructions so they can be fixed.
- dnelson
Add handler for fdatasync(). Quiesce noise about missing handler.
- jkim
|
|
Wed, 1 Mar 2017
|
[ 22:07 sbruno ]
Capture improvements to allow -j arguments to gmake work.
|
[ 20:41 sbruno ]
update sha256 and size as I didn't do that when I updated.
Submitted by: w.schwarzenfeld@utanet.at
|
[ 16:50 sbruno ]
Capture fix for getrlimit()/setrlimit() which helps out with proper
handling of wait6().
https://github.com/seanbruno/qemu-bsd-user/commit/34a5a54e4df983d9611233770b36be161d12a033
|
|
Thu, 23 Feb 2017
|
[ 14:34 sbruno ]
Accept patch to fix fetching of distfiles (getifaddrs) on big endian machines.
As a side affect, we get a semi-functional ifconfig now. :-)
|
|
Mon, 23 Jan 2017
|
[ 18:11 sbruno ]
Fixup build of port for new and shiny man pages that appeared.
|
|
Sun, 22 Jan 2017
|
[ 20:28 sbruno ]
Update to capture fixes for signal handling from:
Fix typo in fork_end() in bsd-user/main.c. #32
https://github.com/seanbruno/qemu-bsd-user/pull/32
Upstream merge and update as well.
|
|
Thu, 29 Dec 2016
|
[ 01:12 sbruno ]
Bump qemu-sbruno to capture today's removal of signal blocking in
the bsd-user code. This update should allow normal operation with the
bugs that we all were familiar with!
PR: 214944 215552
|
|
Mon, 26 Dec 2016
|
[ 15:08 sbruno ]
Update to qemu 2.8.50:
- we should be able to build devel/m4 again, even though the configure
script will segfault instead of hanging forever. Progress!
PR: 214944
|
|
Thu, 17 Nov 2016
|
[ 18:13 sbruno ]
Track QEMU upstream as we approach 2.8.0
|
|
Fri, 11 Nov 2016
|
[ 21:58 sbruno ]
Update qemu-sbruno/bsd-user to caputre a pile of memory leak abatements
in upstream QEMU.
|
|
Tue, 8 Nov 2016
|
[ 13:57 sbruno ]
Delete duplicate distinfo lines that I inserted with make makesum.
Pointyhat fits nicely.
PR: 214309
Submitted by: pkubaj@anongoth.pl
|
[ 02:00 sbruno ]
Update and track upstream QEMU 2.7.50
No changes to qemu-user are intended here, nor are there and fixes here.
|
|
Thu, 28 Jul 2016
|
[ 16:18 sbruno ]
Update qemu-sbruno to upstream.
Add patch to fixup error message from kevent() emulation:
kevent: failed (Bad address)
Submitted-by: Mikail Urankar <mikael.urankar@gmail.com>
|
|
Tue, 12 Jul 2016
|
[ 15:17 sbruno ]
Update qemu-sbruno/qemu-static-user to track upstream development.
Change the way qemu-user-static builds with relationship to glib20 (ian@)
Update a couple of patches for changes to include file locations.
|
|
Tue, 28 Jun 2016
|
[ 18:03 sbruno ]
Update qemu-sbruno/user-static to capture pull request:
- Allow utimensat() syscall on FreeBSD 10.3, where pkg(8) requires it.
Update qemu-sbruno Makefile to not build qemu-tools when building
qemu-user-static slave port. (ian@)
|
|
Tue, 21 Jun 2016
|
[ 14:59 sbruno ]
Capture upstream pull request from jkim@
https://github.com/seanbruno/qemu-bsd-user/pull/23
Limit sysctl(3) output for hw.availpages to 4GB.
- This output should be limited to 4GB on 32-bit targets to be consistent
with hw.physmem. Note this also limits sysconf(3) with _SC_PHYS_PAGES
because libc uses sysctlbyname("hw.availpages", ...) to get the value.
- Properly swap output for hw.physmem, etc. while I am in the neighborhood.
Submitted by: jkim@
|
|
Sat, 11 Jun 2016
|
[ 16:56 sbruno ]
Update to capture pull request from jkim@
- Clean up locking/unlocking path names
Submitted by: jkim
|
|
Thu, 2 Jun 2016
|
[ 19:11 sbruno ]
Update to a merged copy of 2.6.50
|
|
Thu, 19 May 2016
|
[ 17:27 sbruno ]
Update qemu-sbruno/qemu-static-user:
Disable atomic macros which conflict with C++ QEMU's atomic header defines
a few macros which conflict with standard C++ function names, namely
atomic_fetch_{add,sub,and,or}. Disable these macros when compiling for C++.
PR: 209590
Submitted by: dim
|
|
Thu, 28 Apr 2016
|
[ 21:01 sbruno ]
Update qemu-sbruno to track upstream at version 2.5.93.
Fix aarch64 bsd-user by aligning the stack properly. (andy turner).
https://github.com/seanbruno/qemu-bsd-user/commit/743fbfffc13f5717a8611e7a128c39dd9e3495d7
Fix bsd-user syscall implementation of renameat. (mikael urankar).
https://github.com/seanbruno/qemu-bsd-user/pull/20/commits/aa90a1b960f96738ae80778ac13b95508b83842a
Fix bsd-user log_file argument handling now that handling of NULL isn't
being done by the called functions.
https://github.com/seanbruno/qemu-bsd-user/commit/e3d069e8b149b7a1027837cce81b9fe68de85bf1
PR: 208952
|
|
Mon, 25 Apr 2016
|
[ 15:38 sbruno ]
Fix arguments for renameat() to resolve issues with building certain
ports.
PR: 208952
Submitted by: Mikael Urankar <mikhael.urankar@gmail.com>
|
|
Mon, 15 Feb 2016
|
[ 19:47 sbruno ]
A couple of portlint nits for tabs/spaces and a proper WWW note in a
URL in the pkg-descr.
Install stripped enabled for ivshmem* and the palcode-clipper utility.
Drop patch for procctl() and commit it upstream.
|
|
Sat, 13 Feb 2016
|
[ 19:18 sbruno ]
Update qemu-sbruno and qemu-user-static.
Sync bsd-user do_obreak with linux-user (do_brk).
Merging to QEMU upstream provides fixes for the following CVEs:
CVE-2015-8345
CVE-2015-8567
CVE-2015-8568
CVE-2015-8613
CVE-2015-8619
CVE-2015-8701
libvxl upstream has been updated to 1.12 and has accepted a slightly
modified version that addresses the issue in the patch.
PR: 205813
|
|
Thu, 14 Jan 2016
|
[ 15:40 sbruno ]
Bump qemu-sbruno to capture merge request that sync's bsd-user mmap()
code to look/feel/behave like the linux-user mmap() code.
Submitted by: mikhael.urankar@gmail.com
|
|
Mon, 4 Jan 2016
|
[ 18:26 sbruno ]
Bump to 2.5.50.g20160103, catchup with latest bug fixes.
Fix dereference of wrong pointer arg in ipc/semctl syscall.
Fix return from mmap() to setEINVAL and MAP_FAILED when len is 0
PR: 203852 200613
Submitted by: mikael.urankar@gmail.com
|
|
Thu, 24 Dec 2015
|
[ 23:06 sbruno ]
Update qemu-sbruno tracking my github branch.
- merge to 2.5.0 release
- Add support for arm(v4/5) and improve its ability to do stuff. (cognet)
|
|
Sun, 6 Dec 2015
|
[ 16:15 sbruno ]
Bump qemu-sbruno to capture commits in upstream project.
- Fix build on freebsd9 (rakuco)
- When using readlink(1) to read /proc/curproc/file, return the emulated
program name, not qemu. (jkim)
|
|
Sun, 11 Oct 2015
|
[ 22:11 sbruno ]
Update qemu-sbruno to track my github repo.
- Update MIPS user target to work on head after svn r286871
- Bump UPDATING as this makes the current pkg incompatible with current
prior to this revision.
Submitted by: kan
|
|
Sun, 16 Aug 2015
|
[ 19:13 sbruno ]
Update qemu-sbruno to track bsd-user branch on github. I *am* the
upstream of this port and maintainer notified developers on 07/17/15 to
update his ports while he is AFK.
Sync's to pre-release 2.4.0
Differential Revision: https://reviews.freebsd.org/D3385
|
|
Wed, 15 Jul 2015
|
[ 17:38 nox ]
Catch up with github tree - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
|
|
Fri, 10 Jul 2015
|
[ 17:05 nox ]
Catch up with github tree - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
|
|
Thu, 9 Jul 2015
|
[ 19:42 nox ]
Catch up with github tree - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
|
|
Wed, 8 Jul 2015
|
[ 18:45 nox ]
Catch up with github tree - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
|
|
Thu, 2 Jul 2015
|
[ 15:41 nox ]
Catch up with github tree - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
PR: 201168
|
|
Sun, 28 Jun 2015
|
[ 15:17 nox ]
Catch up with github tree, fixing bug caused by struct kinfo_proc typo -
changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
|
|
Fri, 19 Jun 2015
|
[ 18:43 nox ]
Catch up with github tree, adding bsd-user aarch64 fixes - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
|
|
Wed, 17 Jun 2015
|
[ 20:15 nox ]
Catch up with github tree, adding setsockopt handling for IPV6 - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
PR: 200680
|
|
Sat, 13 Jun 2015
|
[ 17:27 nox ]
- Catch up with github tree, adding IP_OPTIONS support sockopt syscalls -
changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
PR: 200703
|
[ 11:33 nox ]
- Catch up with github tree, adding more bsd-user ppc fixes - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
- Add aarch64 to qemu-user-static rc.d script.
|
|
Fri, 12 Jun 2015
|
[ 20:59 nox ]
Catch up with github tree - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
|
|
Mon, 8 Jun 2015
|
[ 16:18 nox ]
Catch up with github tree, adding translation of struct kinfo_proc -
changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
PR: 200615
|
|
Sat, 30 May 2015
|
[ 00:51 nox ]
Catch up with github tree - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
|
|
Fri, 29 May 2015
|
[ 18:23 nox ]
Catch up with github tree, fixing bsd-user pthread crashes among
other things - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
PR: 200485
|
|
Sun, 17 May 2015
|
[ 16:46 nox ]
Catch up with github tree - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
|
|
Fri, 1 May 2015
|
[ 19:10 nox ]
- Catch up with github tree - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
- Switch to new USE_GITHUB syntax.
|
|
Tue, 10 Mar 2015
|
[ 19:30 nox ]
Catch up with github tree - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
|
|
Mon, 16 Feb 2015
|
[ 21:25 nox ]
Catch up with github tree - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
(Looks like aarch64-bsd-user starts becoming usable...)
|
|
Sun, 15 Feb 2015
|
[ 20:03 nox ]
Catch up with github tree - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
|
|
Thu, 12 Feb 2015
|
[ 17:47 nox ]
Catch up with github tree - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
|
|
Sat, 7 Feb 2015
|
[ 20:04 nox ]
Catch up with github tree - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
|
|
Sat, 24 Jan 2015
|
[ 11:32 nox ]
Catch up with github tree - changelog:
https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
|
|
Tue, 6 Jan 2015
|
[ 19:47 nox ] (Only the first 10 of 73 ports in this commit are shown above.  )
- Update emulators/qemu-sbruno to latest github snapshot, fixing
the bsd-user targets on 8 and 9.
- Switch emulators/qemu-user-static to be slave of emulators/qemu-sbruno.
- Update emulators/qemu-devel to latest upstream release 2.2.0, now
w/o bsd-user patches and knob again. (Or at least until the
patches are merged upstream...) [1]
- Add appropriate CONFLICTS to emulators/qemu too and bump its
PORTREVISION.
Suggested by: andrew [1] (for the benefit of testing aarch64 guests)
|
|
Tue, 30 Dec 2014
|
[ 23:50 nox ] (Only the first 10 of 15 ports in this commit are shown above. )
Add new port emulators/qemu-sbruno, to be used for qemu-user-static
once it builds again on 8 and 9:
QEMU is a FAST! processor emulator using dynamic translation to achieve
good emulation speed.
QEMU has two operating modes:
* Full system emulation. In this mode, QEMU emulates a full system
(for example a PC), including a processor and various peripherials.
It can be used to launch different Operating Systems without rebooting
the PC or to debug system code.
* User mode emulation. In this mode, QEMU can launch
Linux processes compiled for one CPU on another CPU. It can be used to
launch the Wine Windows API emulator or to ease cross-compilation and
cross-debugging.
As QEMU requires no host kernel patches to run, it is very safe and easy to use.
http://wiki.qemu.org/Main_Page
This is building sbruno's bsd-user github branch:
WWW: https://github.com/seanbruno/qemu-bsd-user/commits/bsd-user
|
Number of commits found: 78 |
As an Amazon Associate I earn from qualifying purchases.