21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:53 Dmitry Marakasov (amdmi3) 

emulators/joytran: fix build by removing -Werror

While here, add -fcommon to a more suitable var (cflags instead of
warning flags) and in a less obscure way (through patch instead of
reinplace_cmd).

Approved by:	portmgr blanket

    e979cc6

14:21 Tobias C. Berner (tcberner) 

emulators: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alejandro Pulver <alejandro@varnet.biz>
  *  Alexander Best <arundel@gmx.net>
  *  Alexander Nedotsukov <bland@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey V. Antipovsky <kemm@in-line.ru>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Brian Gaeke <brg@dgate.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  David Naylor <naylor.b.david@gmail.com>
  *  David O'Brien (obrien@cs.ucdavis.edu)
  *  Edward Tomasz Napierala <trasz@FreeBSD.org>
  *  Eric L. Hernes <erich@FreeBSD.org>
  *  Felix Palmen <felix@palmen-it.de>
  *  Ganael Laplanche <ganael.laplanche@martymac.org>
  *  Gerald Pfeifer <gerald@FreeBSD.org>
  *  Gunter Wambaugh <techgunter@yahoo.com>
  *  Jacques Vidrine <nectar@FreeBSD.org>
  *  Janni
  *  Jeffrey H. Johnson <CPE1704TKS@bellsouth.net>
  *  Jeremy Karlson
  *  Jeroen Ruigrok van der Werven <asmodai@FreeBSD.org>
  *  Joel Sutton <jsutton@webnet.com.au>
  *  Joerg Wunsch <joerg@FreeBSD.org>
  *  Jonathan M. Bresler (jmb)
  *  Jose Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Juergen Lock <nox@jelal.kn-bremen.de>
  *  Kaltashkin Eugene <zhecka@gmail.com>
  *  Kevin Bowling <kbowling@FreeBSD.org>
  *  Li-Lun Wang <llwang@infor.org>
  *  Mario S F Ferreira <lioux@linf.unb.br> et al.
  *  Martin Hinner
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Neumann <mneumann@ntecs.de>
  *  Miguel Mendez <flynn@energyhq.homeip.net>
  *  Naram Qashat <cyberbotx@cyberbotx.com>
  *  Nicole Reid <root@cooltrainer.org>
  *  Nishika <nishika@cheerful.com>
  *  Pavel I Volkov <pavelivolkov@googlemail.com>
  *  Piotr Kubaj
  *  Ruan Wei (iamayan@gmail.com)
  *  Sebastian Schuetz <sschuetz@fhm.edu>
  *  Seiichirou Hiraoka
  *  Shaun Amott <shaun@FreeBSD.org>
  *  Sheldon Hearn <axl@iafrica.com>
  *  Simon Dick <simond@irrelevant.org>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Stijn Hoop <stijn@win.tue.nl>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Thomas Bernard <nanard@free.fr>
  *  Timothy Beyer <beyert@cs.ucr.edu>
  *  Tobias Reifenberger <tr@freebsd.mayn.de>
  *  Tom Carrick <knyghtmare@knyghtmare.com>
  *  Travis Poppe <tlp@liquidx.org>
  *  Uffe Jakobsen <uffe@uffe.org>
  *  Vladimir Kondratiev <wulf@mail.mipt.ru>
  *  Yukihiro Nakai <Nakai@Mlab.t.u-tokyo.ac.jp>
  *  Yukihiro Nakai <nakai@FreeBSD.org>
  *  alepulver
  *  alex
  *  dchapes@ddm.on.ca
  *  dk
  *  elbarto
  *  janek@gaja.ipan.lublin.pl
  *  jhb
  *  jmz
  *  joerg
  *  jraynard
  *  krion
  *  kstailey
  *  mbr@FreeBSD.org
  *  okeeblow <root@cooltrainer.org>
  *  pixel
  *  pjm
  *  tenser@spitfire.ecsel.psu.edu
  *  trasz
  *  trasz <trasz@pin.if.uz.zgora.pl>
  * # Created by Timothy Beyer <beyert@cs.ucr.edu>

With hat:	portmgr

    27eb52a

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

02:36 danfe 

- Add -fcommon to CFLAGS to unbreak the build against modern compilers,
  e.g. Clang 11 or GCC 10
- While here, fix CMAKE_ARGS to avoid multi-page complaints from CMake
  and replace USE* knobs in somewhat more logical order

Reported by:	pkg-fallout

 

10:08 tobik 

e*: Add missing USES={gnome,sdl,xorg}

 

15:48 zeising 

Add USES=xorg USES=gl, ports categories e

Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories
starting with 'e'.

 

20:25 tcberner 

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

05:40 pi 

emulators/joytran: 0.9.5.1 -> 0.9.5.2

- stripped binary
- USES update

PR:		191893
Submitted by:	beyert@cs.ucr.edu (maintainer)

 

00:46 bapt 

Part 1 at removing now useless FETCH_ARGS redifition

 

10:53 pawel 

- Update to version 0.9.5.1 (fixes joystick support when SDL 2.x is used) [1]
- Support staging
- Define supported DOCS option

PR:		ports/184064 [1]
Submitted by:	maintainer [1]

 

12:33 mva 

- Switch devel/sdl20 to use the autotools-based configuration, since the
  cmake-based one is not maintained that well
- Fix library naming to ensure backwards compatibility on minor version
  changes
- Bump the PORTREVISION on ports depending on devel/sdl20, since its
  shared library name changed

PR:		ports/183975
Submitted by:	Jan Kokemuller <jan.kokemueller@gmail.com>

 

16:16 mva 

- Chase devel/sdl20 shlib version change

 

16:43 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
emulators)

 

14:46 pawel 

Update to version 0.9.5

PR:		ports/178294
Submitted by:	Timothy Beyer <beyert@cs.ucr.edu> (maintainer)

 

20:06 makc 

- convert USE_CMAKE to USES
- while here clean up some ports from CMAKE_VERBOSE, which is intended
  for users

Approved by:	portmgr (miwi)

 

17:48 ak 

- Update to 0.8.7
   Appropriate credits given to hosts in documentation
- Install Profiles system-wide (defaults to local profiles if available)
- Install Optional Documentation system-wide (depends on NOPORTDOCS)
- Fix fetch with BerliOS

PR:     ports/166487
Submitted by:   Timothy Beyer <beyert@cs.ucr.edu> (maintainer)
Approved by:    eadler (mentor)
Feature safe:   yes

10:18 mva 

- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions

Tested by:      exp-run by pav

18:55 jgh 

- Update to 0.8.2

PR:     ports/164758
Submitted by:   maintainer, beyert at cs.ucr.edu

22:35 pawel 

Joytran is a joystick to keyboard/mouse events translator written in C.

The project has several advantages over similar software:

- Portable to a wide variety of platforms, since it is based on SDL and the X11
  XTest Extension (Developed on FreeBSD)
- It is easy to use the joystick in places where it is not usually supported
- Supports keyboard and mouse emulation
- Supports multiple joysticks
- Handles the presence of non-joystick devices, such as USB mice/trackballs
  that masquerade as joysticks gracefully
- Easy switching between profiles
- Lightweight, with few dependencies
- Comprehensive feature set (if there are features missing that are important
  to you, I will at least consider implementing them)
- Freely available (MIT License)

WWW: http://chiselapp.com/user/beyert/repository/joytran/

- Timothy Beyer
beyert@cs.ucr.edu

PR:             ports/159325
Submitted by:   Timothy Beyer <beyert@cs.ucr.edu>