Remove expired ports:

2020-10-25 converters/zbase32: does not build with python3
2020-10-25 devel/py-PEAK-Rules: does not build with python3
2020-10-25 editors/nvi-devel: Unsupported upstream since 2015, please switch to
editors/nvi2

See https://people.freebsd.org/~rene/stuff/old-ports.txt for "unremoveable"
ports.

editors/nvi-devel: Deprecate in favor of editors/nvi2

nvi-devel is based on a 2015 tarchive with several port patches
while nvi2 is an active project with over 600 commits since 2011
(including a pull request I submitted just today) that currently
has no port patches.

Please let me know if nvi-devel does anything that nvi2 does not
and I will attempt to rectify.

editors/nvi-devel: Take maintainership. Update MASTER_SITES to use
the University of Waterloo Computer Science Club mirror (with
LOCAL/leres as a secondary) since ftp.stack.nl no longer exists.

Approved by:	Approved by: johans (maintainer timeout, 3 months and 3 consecutive
timeouts), ler (mentor, implicit)

editors/nvi-devel: Fix DB_CREATE error and segmentation fault; add
the DB_CREATE flag when using bdb >= 4.4.

PR:		238712
Approved by:	johans (maintainer timeout, 2 weeks), matthew (mentor, implicit)
Obtained from:	Mac Ports
	https://trac.macports.org/browser/trunk/dports/editors/nvi/files/patch-common__db.h?rev=108622

For those of us who prefer vi over vim there are no good options
for editing Python code. This patch (based on one by rokuyama at
rk.phys.keio.ac.jp) that adds the EXPANDTAB option to nvi (defaults
to off) which adds an expandtab option to nvi.

PR:		235446
Approved by:	johans (maintainer timeout, 6 weeks), matthew (mentor, implicit)

Unlike the base vi (nvi 2.1.3), nvi-devel calls flock() on a writable
file descriptor. This has the unfortunately side effect of causing
the "Text file busy" error when you edit a script in one window and
try to run it in another.

The fix is to change the initial open() just prior to calling
file_lock() in file_init() to use O_RDONLY instead of O_RDWR. This
does not impact nvi's ability to write files, nvi creates a new
file when writing.

PR:		235445
Approved by:	johans (maintainer timeout, 6 weeks), ler (mentor, implicit)

Remove libiconv.so.3 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

editors/nvi-devel: Fix ports ncurses header detection

Approved by:	ncurses blanket

Cleanup no longer needed CHMOD usage after r424898.

PR:		213743
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

USE_BDB cleanup.

- USE_BDB=4x+ -> USES=bdb.
- USE_BDB=yes -> USES=bdb.
- USE_BDB=xx  -> USES=bdb:xx.

Other modernisations when I see them.

PR:		209183
Sponsored by:	Absolight

editors/nvi-devel: document ncurses requirement (USES+=ncurses)

approved by:	infrastructure blanket

- Switch to options helpers
- Fix stage-qa

Approved by:	portmgr blanket

Copied distfile to my own site to make it fetchable again
Thanks to Julian H. Stacey for the copy

Mark as broken unfetchable ports

Cleanup plist

- Drop .la files, no dependees require them

Approved by:	portmgr blanket

Berkeley DB cleanup, remove versions 4.0 ... 4.7.
- Mk/bsd.database.mk rewrite, new default to db5.
- db6 is eligible by default only if installed on the system.
- Bump PORTREVISION of all ports that directly depend on BerkeleyDB or
  where USE_BDB is found in the port's directory
- Patch a few ports such that they will pick up or work with newer
  versions.
- Add UPDATING entry
- Drive-by format fix for pks
- Drop BerkeleyDB option from mail/popular for now, requires more work.
- Exp-run logs linked from the PR below.
- Ports that do not build (IGNORE, BROKEN, etc.) have pro-forma changes
  for new Berkeley DB, but are untested.

NOTE: please read UPDATING and the Wiki page before proceeding!

Announcement:	http://lists.freebsd.org/pipermail/freebsd-ports-announce/2014-August/000090.html
Wiki reference:	https://wiki.freebsd.org/Ports/BerkeleyDBCleanup
PR:		192690
Approved by:	portmgr (implicit, PORTREVISION bump on unstaged ports)

Convert a bunch of USE_BZIP2 to USES=tar:bzip2

Approved by:	portmgr (not really, but touches unstaged ports)

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

- Convert USE_AUTOTOOLS=libtool to USES=libtool.
- Fix build on FreeBSD 10 where libiconv isn't used.
- Remove post-install. Not needed with staging.

PR:		ports/186592
Submitted by:	tijl

Enable stage support

Add NO_STAGE all over the place in preparation for the staging support (cat:
editors)

Add a missing dependency on pkgconf

Update MASTER_SITES and trim header

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	bapt, kwm

Convert to new options framework

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Bump USE_BDB requirement from yes to 42+, as nvi breaks with DB 4.1
probably due to BDB issue #8852, "Remove restriction that DB_TRUNCATE is
not allowed on files with subdatabases. This restriction was introduced
in 4.1.25." -- source: Berkeley DB 4.2.52 ChangeLog

nvi-devel works with db42 and db51 on 8.2-amd64.

Approved by: johans (maintainer)

Fix up Berkeley DB dependencies ahead of databases/db3 removal later

PR:             ports/155761
Submitted by:   mandree

- Get Rid MD5 support

Sync to new bsd.autotools.mk

- iconv should be a library dependency

Reported by:    Christian Weisgerber

- Fix previous commit, now actually enabling wide character support
- Fix iconv support as well (the dependency was not used)
- Bump portrevision

Reported by:    Christian Weisgerber

- Enable wide-character support by default (enabling UTF-8 text editing);
  This has no effect for people who don't use wide-characters
- Bump portrevision
- Claim maintainership

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

Use LTMAIN and LIBTOOL instead of hardcore.

Fix build with custom LOCALBASE.

Reported by:    QATty

Change to installing binaries with 'n' prefix as to not conflict with
editors/2bsd-vi.  It does, however, now conflict with editors/nvi-m17n.

Remove dead MASTER_SITES.

Remove unnecessary RELENG_4 hack.

PR:             ports/124547
Submitted by:   Robert Wilson <hotaru@safe-mail.net>

Upgrade to version 1.81.6.

Upgrade to version 1.81.6.

Attempt to fix build on 7.x with gcc4.2.

PR:             ports/118077
Submitted by:   "J.R. Oldroyd" <fbsd at opal dot com>
Approved by:    portmgr (self)

BROKEN with gcc 4.2

- Fix after objformat removal

Reported by:    pointyhat

Maintainer has had his port bit taken for safekeeping.  While here,
remove stale mastersites and pet portlint.

Hat:            portmgr

SHA256ify

Approved by:    krion@

Add size data.

Approved by:    maintainers

No need to split bsd.ports.mk.

Reported by:    Sheldon Hearn <sheldonh@starjuice.net>

Make buildable on -current.

BROKEN on 5.1: does not compile

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

BerkeleyDB cleanup - stage 2

Update databases/db3 to 3.3.11, and fix the few ports that need sorting
after the shlib version update, and a slight API change from 3.2.x->3.3.x

Something seems to have happened to the master site at www.kotnet.org,
since everything under ~skimo is returning 404s.  This is probably
temporary, but host the distfile locally just in case for the time
being.

Submitted by:   fenner's distfile survey

Bump PORTREVISION to reflect the (lib)iconv upgrade.

Iconv cleanup, stage 1b: correct {BUILD,LIB,RUN}_DEPENDS of all ports that need
libiconv.

Belatedly upgrade to 1.81.5.  Notes: (a) patch-vi-relative has been  
incorporated; (b) this now compiles on -current after libdb from   databases/db3
was renamed to libdb3; (c) this now compiles on -stable   (removed BROKEN since
-stable has wchar.h now); and (d) fixed plist.    

Back out the db3 port update because some of these dependent ports had   been
broken by the incompatibility between db3.2 and db3.3.    

Reflect databases/db3's shlib version bump from 2 to 3.    

Remove a master site due to lack of bandwidth.    

Remove my hack and replace it with a better, more correct patch from   the
vendor.  

Add nvi-devel, the development snapshot of nvi.