02:41 fluffy 

- WPS import plugin request libwps-0.4, not -0.3
- Plan require KF5Holidays and AkonadiKontacts for services integraion
- Depend on KF5Contacts for Adsress book support

With hat:	kde

 

06:36 jbeich 

devel/boost-*: update to 1.70.0

Changes:	http://www.boost.org/users/history/version_1_70_0.html
PR:		235956
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D19303

 

21:29 tcberner 

graphics/poppler: update to 0.75

Release 0.75.0:
	core:
		* Fix rendering of some annotations
		* Fix crashes in broken files
		* Small internal code improvements

	cpp:
		* Improve documentation
		* tests: Add showing version information to poppler-dump

	utils:
		* pdfattach: new util
		* pdftohtml: add -dataurls parameter
		* pdftoppm: add -sep and -forcenum parameters
		* pdftohtml: make singleHtml and stout not mutually exclusive
		* pdfsig: fix use after free

- bump revisions of dependent ports due to shlib version change

PR:		236791
Exp-run by:	antoine
Approved by:	kwm (gnome)

 

21:32 tcberner 

multimedia/phonon, multimedia/phonon-gestreamer,
multimedia/phonon-designerplugin: remove flavorse (Qt4 deprecation)

 

20:16 tcberner 

devel/qca: remove flavors (Qt4 deprecation)

 

19:44 tcberner 

Bump revisions after poppler upgrade.

As reported libreoffice requires a bump in revision, to be on the save
side, bump all the consumers of poppler.

Reported by:	Walter Schwarzenfeld <w.schwarzenfeld@utanet.at>

 

17:10 tcberner 

Update graphics/poppler* to 0.74.0

Changelog can be found here:
  https://poppler.freedesktop.org/releases.html

PR:		235609
Exp-run by:	antoine
Approved by:	gnome (kde)
Differential Revision:	https://reviews.freebsd.org/D18805

 

11:13 tijl 

Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call
in the weak wrapper resolves to the weak wrapper itself creating an infinite
call loop that overflows the stack and causes a crash.  Some of the
allocation functions are variants of C++ new and delete and it probably
depends on the compiler whether these variants are used in other parts of
Qt5Webengine.

Remove the weak wrappers (make them Linux specific).  This isn't binary
compatible but we are already breaking that with the changes to the symbol
versions.

[1]
https://github.com/qt/qtwebengine/commit/5c2cbfccf9aafb547b0b30914c4056abd25942a4
[2]
https://github.com/qt/qtwebengine/commit/2ed5054e3a800fa97c2c9e920ba1e6ea4b6ef2a5
[3]
https://github.com/qt/qtwebengine/commit/009f5ebb4bd6e50188671e0815a5dae6afe39db5

Bump all ports that depend on Qt5.

PR:		234070
Exp-run by:	antoine
Approved by:	kde (adridg)

 

09:06 tcberner 

Update math/eigen3 to 3.3.7

- http://eigen.tuxfamily.org/index.php?title=ChangeLog#Eigen_3.3.6
- http://eigen.tuxfamily.org/index.php?title=ChangeLog#Eigen_3.3.7

 

20:25 tcberner 

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

 

15:10 tcberner 

Update poppler to 0.72

This update brings many changes
- the build system has switched to cmake
- some ports needed to be switched to use their bundled
  version of poppler:
  - print/tex-luatex (r487226)
  - print/tex-xetex (r487226)
  - editors/opeonffice-devel
- Qt4 support has been dropped
  - print/frescobaldi has been removed for this reason.
- most of the added patches can be removed with the next
  upgrade of the concerning port.

PR:		233452
Exp-run by:	antoine
Approved by:	gnome (kwm)
Differential Revision:	https://reviews.freebsd.org/D17456

 

01:35 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

 

00:15 jbeich 

devel/boost-*: update to 1.69.0

Changes:	http://www.boost.org/users/history/version_1_69_0.html
PR:		232525
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17645

 

19:00 tcberner 

Merge lang/qt5-qml and x11-toolkits/qt5-quick into x11-toolkits/qt5-declarative

- There was no obvious reason to split these ports, and it makes
  porting simpler; the set of ports using either mostly coincided.

Exp-run by:	antoine
PR:		223687
PR:		232751

 

10:15 mandree 

Update ilmbase and openexr to 2.3.0, rename OpenEXR to openexr.

Release notes: <https://github.com/openexr/openexr/releases/tag/v2.3.0>

Adjust LIB_DEPENDS of all ports that require ilmbase or openexr to chase
the new lower-case spelling of the name, and to omit the version from the
library name to ease future maintenance.

Bump PORTREVISION of all ports that depend on ilmbase or openexr directly,
so that they all get rebuilt on upgrades.

Add patches to graphics/ampasCTL to keep it alive, with (a) ilmbase now
that its Iex::BaseExc class is no longer derived from std::string,
details were given upstream through https://github.com/ampas/CTL/issues/71
and (b) to unwind semicolon/;-lists in cmake that stem from openexr/
ilmbase pkg-config variables.
(Note ampasCTL is unmaintained as FreeBSD port, and upstream,
and I cannot run-time test it.)

Poudriere build tests on 11.2-RELEASE-p1 amd64 of ALL ports depending
directly or indirectly on ilmbase and/or openexr have passed without
regressions.  Thus invoking due diligence, I believe I have done the
equivalent of an -exp run, and do not require approval for the dependency
chases to third-party ports.

 

06:58 jbeich 

devel/boost-*: update to 1.68.0

- Switch to C++14 for libboost_system to support C++14 consumers

Changes:	http://www.boost.org/users/history/version_1_68_0.html
PR:		229569
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D16165

 

22:18 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

 

17:39 tcberner 

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

 

16:52 tcberner 

multimedia/*phonon*: update and flavorize with @qt4/@qt5

Approved by:	portmgr (mat)
Differential Revision:	https://reviews.freebsd.org/D14632

 

09:28 tcberner 

Update calligra, krita, kexi (and their dependencies) to their newest versions

 

13:57 jbeich 

devel/boost-*: update to 1.67.0

Changes:	http://www.boost.org/users/history/version_1_67_0.html
PR:		227427
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D15030

 

11:09 tcberner 

devel/qca, devel/qca-qt5 -- create flavors

Approved by:	portmgr (mat)
Differential Revision:	https://reviews.freebsd.org/D14651

 

04:11 jbeich 

devel/boost-*: update to 1.66.0

Changes:	http://www.boost.org/users/history/version_1_66_0.html
PR:		223922
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D13279

 

16:49 tcberner 

New USES=eigen

  Usage:
    USES=eigen:<version>[,<type>]

    version: 2 or 3 (required)
    type:    build (default), run

  For example:
    USES=eigen:2,build,run
  will add a BUILD- and RUN_DEPENDS on math/eigen2, and
    USES=eigen:3
  will add a BUILD_DEPENDS on math/eigen3.

* Convert the existing ports to use it
  - biology/iqtree: remove run time dependency (seemed not to be needed)
  - graphics/movit: remove run time dependency (seemed not to be needed)
  - science/avogadro: add run time dependeny (installed cmake file requires it
to be present)

Reviewed by:	rakuco, mat
Differential Revision:	https://reviews.freebsd.org/D13702

 

01:58 mandree 

Security update OpenEXR and ilmbase to 2.2.1.

While here, fix libIlmImfUtil_la_LDFLAGp so that when linking libIlmImfUtil,
the locally built libIlmImf gets precedence over the one in /usr/local,
to permit upgrades in a running system with the older version installed.

This changes the library's SONAME, so bump PORTREVISION of all dependees.

Unfortunately, this looks a bit too intrusive for an MFH to 2017Q4.

Security:	CVE-2017-9110
Security:	CVE-2017-9111
Security:	CVE-2017-9112
Security:	CVE-2017-9113
Security:	CVE-2017-9114
Security:	CVE-2017-9115
Security:	CVE-2017-9116
Security:	803879e9-4195-11e7-9b08-080027ef73ec

 

20:43 adridg 

Update KDE ports that use OpenEXR, to use it optionally. This makes
it easier to switch off if OpenEXR is removed.

Reported by:	mandree
Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D13132

 

00:08 jbeich 

devel/boost-*: update to 1.65.1

Changes:	http://www.boost.org/users/history/version_1_65_1.html
PR:		218835
Approved by:	maintainer timeout (1.65.1: 2 weeks; 1.65.0: 1 month)
Tested by:	jhibbits (on powerpc64, earlier version)
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D11582

 

00:05 jbeich 

devel/boost-*: enable C++11 features

PR:		218835
Obtained from:	https://github.com/DragonFlyBSD/DeltaPorts/pull/690
Approved by:	maintainer timeout (2 months)
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D11582

 

20:55 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

 

15:49 swills 

Add missed PORTREVISION bumps after recent poppler update

 

20:38 tcberner 

Update math/gsl to 2.4

Exp-Run by:	antoine
PR:		220408

 

13:44 rakuco 

Update the Calligra ports to 3.0.1.

The 3.x series is based on KDE Frameworks 5, and some programs have been split
into separate ports:
- Sheets, Words & co are in editors/calligra.
- Krita is in graphics/krita.
- Kexi is in databases/kexi.
- The calligra-l10n* ports are now part of editors/calligra itself.

Okular support in editors/calligra and Marble support in textproc/kreport have
been disabled for now because they need the KF5 version of those ports.

Thanks to everyone who's tested it and worked on it in our area51 repository.

Submitted by:	Adrian de Groot <groot@kde.org>, tcberner, rakuco
Reviewed by:	rakuco, mat (earlier versions)
Differential Revision:	https://reviews.freebsd.org/D10167

 

08:39 tcberner 

Ent-eigen editors/calligra.

The recent update of math/eigen3 broke editors/calligra, as opencv and
eigen-3.2+ contain same named parts.
Remove the using namespace Eigen from the files, and import the qualified class
names instead.

This is a simplified backport of
https://phabricator.kde.org/R37:2db4438671e17002c7b02e3ad3a5208930765e4f .

Reviewed by:	rakuco
Differential Revision:	https://reviews.freebsd.org/D11243

 

05:03 rezny 

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

 

06:48 jbeich 

devel/boost-*: update to 1.64.0

Changes:	http://www.boost.org/users/history/version_1_64_0.html
PR:		218835
Approved by:	office (bapt)
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D10472

 

05:26 tcberner 

Update math/gsl to 2.3

This release introduces some new features and fixes several bugs:
	http://savannah.gnu.org/forum/forum.php?forum_id=8751

* update to 2.3 and take maintainership
* update math/py-gsl to 2.2.0 for gsl2 support
* update math/rubygem-rb-gsl to 2.1.0.2 for gsl2 support

PR:		218952
Exp-run by:	antoine
Reviewed by:	mat, rakuco
Approved by:	rakuco (mentor)
Differential Revision:	https://reviews.freebsd.org/D10522

 

08:20 riggs 

Chase ffmpeg 3.3 update (ABI changes)

PR:		218658
Submitted by:	riggs

 

15:23 gerald 

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

 

10:42 olivierd 

Chase update of graphics/poppler (and slaves ports) in revision r430777

 

08:45 jbeich 

devel/boost-*: update to 1.63.0

Changes:	http://www.boost.org/users/history/version_1_63_0.html
PR:		215598
Exp-run by:	antoine
Approved by:	office (bapt)
MFH:		2017Q1

 

12:45 jbeich 

devel/boost-*: update to 1.62.0

- Enable `long double` C99 math usage
- Switch 9.x back to building with GCC

Changes:	http://www.boost.org/users/history/
PR:		199601
Submitted by:	Chen Xu, bapt, amdmi3, truckman (based on)
Reviewed by:	rakuco (kde) (earlier version)
Exp-run by:	antoine (3 tries), truckman (consumers only, earlier versions)
Approved by:	bapt (office)

 

20:02 olivierd 

Chase update of Poppler after revision r421386

 

08:20 tcberner 

Replace Mk/bsd.kde4.mk by Mk/Uses/kde.mk in preparation for KDE Frameworks and
Plasma5 ports

At the moment KDE ports use bsd.kde4.mk to handle their dependencies. When
working on the ports for KDE Frameworks and Plasma5 it seemed to be more
reasonable to create a new kde.mk instead of adding an bsd.kde5.mk.

The kde.mk in this review is a stripped down version of the one we are using in
the KDE Test repositories plasma5 branch [1] to only contain the parts relevant
to the current KDE4 ports in the portstree [2].

Changes to the KDE Ports needed by this:

Replace USE_KDE4 by USE_KDE [3]
Add USES=kde:4 [4]
[1] http://src.mouf.net/area51/view/branches/plasma5/KDE/Mk/Uses/kde.mk
[2] The version in the plasma5 branch also handles frameworks/plasma5 and
    handles MASTER_SITES via a KDE_DIST variable similar to bsd.qt.mk for Qt
    Ports -- I chose to leave this out for now, as the diff is already large
    enough.
[3] I chose USE_KDE instead of USE_KDE4, USE_KDE5, USE_KDEX as the version we
    want is already specified as argument to kde:<arg>
[4] For KDE Frameworks and Plasma5 ports this would be kde:5

PR:             210667
Approved by:    portmgr, mat (mentor), rakuco (mentor)
Reviewed by:    mat, rakuco
Differential Revision:   https://reviews.freebsd.org/D6961

 

20:56 rene 

Remove expired misc/kdehier4 and update all of its consumers to not reference it
any
longer. This is a no-op because KDE4_PREFIX is equal to LOCALBASE

Fix up properties for misc/kde4-l10n/files/bsd.l10n.mk to make svn happy.

PR:		209014 (partial)
Submitted by:	myself
Approved by:	portmgr (bapt)
Differential Revision:	https://reviews.freebsd.org/D6542

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

12:35 rakuco 

Change header installation location for kdelibs4-based ports.

Install x11/kdelibs4's headers into include/kde4 instead of include (which
consequently causes several other ports to have their installation paths
changed too).

The idea behind this is to reduce path conflicts between KDE4 ports and the
upcoming KDE Frameworks 5 ports that will be installed into include/KF5. If
we continue installing the KDE4 headers into include/, we can end up in a
situation like this:

    c++ [...] -I/usr/local/include -I/usr/local/include/KF5 file.cpp

If the KDE4 and KF5 versions of a port have the same headers, the KDE4 port
will unintentionally be picked up first and the build will fail.

Most of this huge patch is just PORTREVISION bumps, pkg-plist changes and a
few patches to FooConfig.cmake files to make them look into the kde4/
subdirectory in include/.

Changes which don't fit into the above are:
- deskutils/kdepimlibs4: Import an upstream patch to remove some double
  semicolons that cause base GCC to fail. They have always been present, but
  since the faulty header was referenced via -isystem /usr/local/include
  this never caused any problems.
- devel/subversion, devel/subversion18: Update patch-configure. The current
  kwallet changes there date back to 2011 (r272490), at a time when the
  build could fail when both KDE3 and KDE4 were installed. Replace those
  bits with a change I've submitted upstream to use the kde4-config program
  to determine where KDE4's headers and libraries are installed instead of
  assuming the headers are always in include/.

Once again, huge thanks to Tobias Berner <tcberner@gmail.com> for being the
first one to notice this problem when working on the KDE Frameworks 5 ports,
coming up with the solution and bugging me until I had time to work on this
and ask for the exp-run :-)

PR:		207906 (exp-run)

 

12:27 rakuco 

Fix plist with the GMIC option on after r408504.

Submitted by:	Matthew Rezny <matthew@reztek.cz>

 

19:18 rakuco 

Update Calligra to 2.9.11.

This time it did not take us 2 years to update Calligra. In fact, we're
updating it 5 days after its official release \o/

Announcement: https://www.calligra.org/news/calligra-2-9-11-released/

 

19:40 kwm 

Update poppler to 0.40.0. [1]

Add patches to py-poppler [2] and rubygem-poppler [3] to fix the build
of these ports with poppler 0.39+.

PR:		206293 [1]
Submitted by:	olivierd@ [1]
Obtained from:	ubuntu [2], rubygem-poppler upstream [3]

 

18:10 rakuco 

Update Calligra to 2.9.10.

This is the latest Calligra release, and the 2.9 series will be the last
KDE4-based release series.

As usual, huge thanks to Tobias Berner <tcberner@gmail.com> for working on this
in kde@'s area51 experimental repository (including previous Calligra releases
between 2.7.5 and 2.9.10).

Notable changes from a packaging perspective:
- Several dependencies have been updated to use more recent ports versions.
- Old translations not shipped by the current Calligra release have been
  removed.
- The dependency on sysutils/nepomuk-core has been dropped, following what
  upstream has done.
- The dependency on Qt3-compatibility Qt4 ports has been dropped, following
  upstream.
- CONFLICTS with ancient ports have been removed.
- Support for G'MIC (GREYC's Magic for Image Computing), introduced after
  2.7.5, is disabled by default, as building the code with clang requires
  insane (>24GB) amounts of memory. We reported this bug to the LLVM developers
  (bug 22199) almost a year ago, but there has been no activity upstream.
- Stopped depending on graphics/pstoedit in an unorthodox way: just follow what
  every major Linux distribution does and unconditionally depend on it. I could
  not figure out why we were originally depending on the port if it was already
  installed.
- Stop playing tricks with PACKAGE_BUILDING: we do not package Vc
  (https://github.com/VcDevel/Vc) so it does not make sense to turn on support
  for it when building packages. Not only that, but the CMake option name was
  wrong (it should be PACKAGERS_BUILD, not WITH_PACKAGERS_BUILD).

 

15:44 rakuco 

Uses/iconv.mk: Set iconv-related CMake variables.

The way we deal with iconv in base and ports across different FreeBSD
releases is complicated: 9.x does not have iconv.h in base, 10.1 has it with
a different prototype for iconv(3) and later versions have the right
iconv(3) prototype. And, in some cases (USES=iconv:{translit,wchar_t}), we
must always use the libiconv port.

This is why there are so many checks in Uses/iconv.mk: we need to know the
situation we currently have in order to decide whether to pull iconv from
converters/libiconv, whether to just use its header (and pull the library
from base) or whether to use everything from base.

r384038 adjusted several CMake-based ports, but did so in a way that was not
very scalable and required a few intrusive patches to some ports. Most ports
that have both USES=cmake and USES=iconv use variations of FindIconv.cmake
that behave similarly. This change passes the header and library values we
really want to use to CMake using the most common variable names, bypassing
the calls to find_path() and find_library() that would sometimes end up
finding the wrong file. The few ports that use different variable names have
had their Makefiles adjusted (we manually pass the values we want via
CMAKE_ARGS).

Other changes:
- chinese/fcitx: Explicitly set LIBICONV_LIBC_HAS_ICONV_OPEN=OFF as we
  always want the version from ports because of USES=iconv:wchar_t.
- editors/calligra: Explicitly use iconv:translit because Kexi needs it.
- irc/weechat and irc/weechat-devel: The FindIconv.cmake patches could not
  be entirely removed because the check_library_exists() calls are wrong.
  Sent upstream: https://github.com/weechat/weechat/pull/513
- textproc/ctpp2: Use iconv:translit when the TRANSLITERATE option is used.

PORTREVISION has been bumped in editors/calligra and textproc/ctpp2 because
their dependency list has changed in 10.2 and later as the ports version is
always used now.

PR:		202798
Reviewed by:	antoine, tijl
Approved by:	portmgr (antoine)

 

16:06 kwm 

Update poppler to 0.34.0. [1]

Chase all users of shlib version change of libpoppler.so.

PR:		201477 [1]
Submitted by:	olivierd@ [1]

 

08:04 jkim 

editors/calligra still requires libwps 0.2.x.  Resurrect the old version.

 

18:33 antoine 

Convert to USES=jpeg

 

10:15 mat 

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

 

08:28 amdmi3 

- Add CPE info

Approved by:	portmgr blanket

 

18:19 makc 

- Remove deprecated USE_KDE4=kdehier
- while here, remove any reference to KDE in deskutils/charmtimetracker (Qt-only
app)
  and supposedly fix build of graphics/gnash with KDE4 option

 

12:28 kwm 

Update poppler to 0.30.0 [1].

Make sure we use openjpeg1 in poppler, while openjpeg2 support
was added there still bugs in openjpeg2 that need to be fixed.
Add patches to inkscape for API changes in poppler 0.29.0 [2].

PR:		196599 [1]
Submitted by:	olivierd@ [1]
Exp-run by:	antoine@
Obtained from:	upstream [2]

 

20:54 bapt 

Bump portrevision after png update

 

19:04 antoine 

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

 

12:55 makc 

Bump PORTREVISION after graphics/poppler update to 0.26.3

 

19:13 crees 

Switch to USES=pgsql

 

15:59 makc 

- Chase shlib bump in astro/marble and graphics/okular after update to 4.14.2

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

16:36 tijl 

math/fftw3:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Remove PTHREAD_CFLAGS and PTHREAD_LIBS
- Use MAKE_CMD

 

13:09 tijl 

math/gsl:
- Add USES=libtool and bump dependent ports
- Add USES=pathfix and INSTALL_TARGET=install-strip

Approved by:	portmgr (implicit, bump unstage port)

 

20:37 mandree 

Upgrade OpenEXR and ilmbase to 2.2.0.

GCC 4.2 in FreeBSD 8.X/9.X base is now too old to compile OpenEXR, so
GCC-based systems will upgrade to the default ports compiler (GCC 4.7
currently.)

Add two patches to OpenEXR to permit building it in a live system with
the older OpenEXR version installed. Bug report filed to upstream Github
at https://github.com/openexr/openexr/issues/130

Couple OpenEXR more tightly to ilmbase and require its exact .so
version.

Add UPDATING note, and bump PORTREVISION of all dependent ports.

Proto-STAGE hugin-devel, and mark it IGNORE because hugin is newer.

Approved by:	portmgr (implicit for bumping PORTREVISION on unstaged ports)

 

21:07 adamw 

Convert a bunch of USE_XZ to USES=tar:xz.

Approved by:	portmgr (not really, but touches unstaged ports)

 

09:41 tijl 

Bump PORTREVISION on all ports with USE_SQLITE=yes or USE_SQLITE=3 that
have not been bumped yet after the latest libsqlite3.so library version
change.

Approved by:	portmgr (implicit)

 

14:42 kwm 

Update openjpeg to 2.1.0.

Version 2.x is incompatible with openjpeg 1.5. Preserve it as openjpeg15
and update users.

Approved by:	portmgr (implicit) for NO_STAGE ports

 

18:28 zeising 

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)

 

20:36 danfe 

- Chase libexiv2.so shlib version bump after r350163
- Fix nearby minor style issues while here (not all)

Approved by:	portmgr (bapt), some ports are still NO_STAGE :(

 

14:31 makc 

- Bump PORTREVISION after KDE4_PREFIX change

 

11:44 bapt 

Chase boost and icu bump
While here convert some LIB_DEPENDS

 

12:17 makc 

Replace KDE4 sharedmime with USES=shared-mime-info. KDE4 sharedmime is
deprecated and will be removed along with switching KDE4_PREFIX to
${LOCALBASE} soon.

 

16:54 kwm 

Update poppler to 0.24.4.

Update comment.
Use new LIB_DEPENDS syntax, use USES=pathfix.
Stagify.

Bump portrevision of all affected ports, and Update poppler* LIB_DEPENDS to
new syntax.

 

22:59 avilla 

- Update Calligra Suite to 2.7.5.
- Require a new compiler to build Calligra.
- Make GTL really an option in Calligra.
- STAGEify.
- Use OPTIONS helpers.
- Set NO_ARCH for translation ports.
- Add translation port for Intelingua.

Calligra 2.7 release notes:
http://www.calligra.org/news/calligra-2-7-released

 

10:53 bapt 

Convert LIB_DEPENDS for ports depending on boost

 

14:25 nemysis 

- Bump dependent ports' revisions (graphics/ilmbase and graphics/OpenEXR)

Approved by:	wg (mentor)

 

00:32 nemysis 

graphics/ilmbase

- Update to 2.0.1
- Change master sites to SAVANNAH
- Change maintainer email to @FreeBSD.org
- Remove conflict with non existent Port
- USES pathfix pkgconfig
- Add executable
- Add DOCS Option
- Support STAGEDIR and add OPTIONS_SUB
- Use pathfix instead of simple patches
- Adjust patches
- Change WWW

graphics/OpenEXR

- Update to 2.0.1
- Change master sites to SAVANNAH
- Change maintainer email to @FreeBSD.org
- Use the new format for LIB_DEPENDS
- USES gmake pathfix pkgconfig
- Add DOCS and EXAMPLES Options
- Support STAGEDIR and add OPTIONS_SUB
- Change REINPLACE_CMD
- Add extra patch for EXAMPLES
- Remove obsolete patches

- Bump dependent ports' revisions

Approved by:	pawel / wg (mentors)

 

00:52 gerald 

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui
 - 0^0, which returned (NaN,NaN) previously, now returns (1,+0).
 - Removed compatibility with K&R compilers, which was untestable due
   to lack of such compilers.
 - New functions
   . mpc_log10
   . mpc_mul_2si, mpc_div_2si
 - Speed-ups
   . mpc_fma
 - Bug fixes
   . mpc_div and mpc_norm now return a value indicating the effective
     rounding direction, as the other functions.
   . mpc_mul, mpc_sqr and mpc_norm now return correct results even if
     there are over- or underflows during the computation.
   . mpc_asin, mpc_proj, mpc_sqr: Wrong result when input variable has
     infinite part and equals output variable is corrected.
   . mpc_fr_sub: Wrong return value for imaginary part is corrected.

Convert to the new LIB_DEPENDS standard and remove hard-coded
.so versions from a couple of dependent ports.

Bump PORTREVISIONS of all dependent ports.

PR:		183141
Approved by:	portmgr (bdrewery)

 

16:36 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
editors)

 

09:00 bapt 

Convert to new perl framework

 

16:06 bf 

Update math/gsl to 1.16 and adjust some dependent ports

 

22:35 ak 

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

 

08:50 mva 

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	bapt, kwm

 

10:19 bapt 

Convert e* to USES=pkgconfig

 

10:07 avilla 

- Fix MySQL option.

PR:		177628
Submitted by:	John Marino <draco@marino.st>

 

14:36 avilla 

- Fix plist.
- Bump PORTREVISION.

HDR support doesn't depend anymore on OpenGTL.

Reported by:	pointyhat via miwi
Approved by:	portmgr via miwi

 

23:51 avilla 

- Update Calligra and l10n ports to 2.6.2:
  * Japanese translation is stuck at 2.5.5;
  * Southern Catalan translation is now up to date;
  * Bosnian, Slovenian and Turkish translations were added.

This update brings several new features and the new Calligra Author;
for a full list, please read 2.6 release notes:
http://www.calligra.org/news/calligra-2-6-released

 

12:00 makc 

Chase libkipi, marble, okular shlib bump after KDE 4.10.1 update

 

20:06 makc 

- convert USE_CMAKE to USES
- while here clean up some ports from CMAKE_VERBOSE, which is intended
  for users

Approved by:	portmgr (miwi)

 

05:27 mezz 

- Update poppler to 0.22.2.
- Bump the rest ports that depend on the poppler and poppler-qt because of
  shared library version have been changed.
- Add a note in the UPDATING for require to rebuild all ports that depend
  on poppler.

Submitted by:	kwm (poppler* part)

 

11:36 makc 

Merge from area51 repository:
- Update to 2.5.5
- Convert to new options framework
- minor cleanups

Courtesy of:	avilla

 

20:11 makc 

Bump PORTREVISION after KDE SC update.

 

13:38 bapt 

Chase boost update

 

03:32 swills 

- Chase lib version changes from ilmbase and OpenEXR updates

 

08:50 avilla 

- Update Calligra to 2.5.1.
- Remove header from Makefiles.

This release contains a number of important bug fixes to 2.5.0 and we
recommend everybody to update. Release notes can be found in the
official announcement:
http://www.calligra.org/news/calligra-2-5-1-released

 

16:46 avilla 

The KDE/FreeBSD team is pleased to announce version 2.5 of Calligra,
coming to the ports tree after a short testing period which showed it
to be quite stable.

For the productivity part of the suite (word processor, spreadsheet,
and presentation program) the target user of version 2.5 is still the
student or academic user. This version has a number of new features
that will make it more suitable for these users.
The artistic applications of the Calligra Suite are the most mature
ones and are already used by professional users everywhere.

As usual, detailed release notes can be found in the official
announcement:
http://www.calligra.org/news/calligra-2-5-released

Meanwhile, new translations were added:
- editors/calligra-l10n-gl (Gallegan)

15:29 bsam 

Update graphics/exiv2 to version 0.23.
The so library version has changed.
Bump PORTREVISIONs at dependent ports.

PR:		ports/169733
Submitted by:	bsam (me)
Approved by:	multimedia (maintainer timeout 3 weeks)