devel/talloc: Update to 2.3.4

PR:		257432

*/*: Remove redundant '-*' from CONFLICTS definitions

The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").

Approved by: portmgr (blanket)

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

devel/talloc: switch to PYTHON_EXT_SUFFIX

Update Samba supplimentary libs to the recent ones.

PR:		246284
		246285
		246286
		246287

Clean up USES

With hat:	portmgr

- Update to 2.3.0, fixing build with python 3.8

PR:		241791 [1], 241793 [2]
Submitted by:	yasu@utahime.org [1], osidorkin@gmail.com [2]
Reported by:	amdmi3 [1]
Approved by:	maintainer timeout (timur, 2 weeks)

Grammar nit

Upgrade Samba supplimentary ports to the new build system. Effectively they are
dependent now from Python 3.4+ for the build, unless NO_PYTHON is specified,
in which case ports still can be build with Python 2.7.

That should address legacy Python dependencies for some non-Samba ports as well.

Update Samba supplimentary libs to the newer versions.

Sponsored by:	iXsystems Inc.

Update Samba supplimentary libraries, fixed (new) portlint errors, changed
Python3 version knob.

Remove unused remnant of old patch, not needed since r454532.

Approved by:	portmgr (tier-2 blanket)

Update supplimentary Samba libs to the latest versions.

Sponsored by:	iXsystems Inc.

Small useless bump of the version to make poudriere pick up changes in
WITH_SAMBA4_PYTHON3 usage

Make sure that you can compile all supplimentary ports without Python bindings

Fix too broad Python specification, cut down to 2.7 explicitly.

Update Samba supplimentary libraries to the most recent versions.

Fix build of devel/talloc on powerpc and powerpc64

Base gcc doesn't accept -Wno-format-length.  Remove its usage on powerpc and
powerpc64.  It could probably be generalized to all gcc-based targets, but that
hasn't been tested on other architectures.

PR:		219455
Submitted by:	linimon
Approved by:	swills

Mark some ports failing on power64.  In cases where the error message
was a stub, provide a real one.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

Bump port version to 2.1.9, required by Samba4.6.

Update Samba4* supplimentary libraries to the newer versions.
Made databases/ldb to depend on openldap-sasl-client, so it won't conflict with
the corresponding requirement of net/samba4* ports.

This is routine update for the Samba supplimentary libraries, bumping them to
the versions that commonly acceptable by recent Samba ports, in particular,
samba44.

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Update Samba supplimentary libs

Fix to the coredump in the library code of the Samba libs. Provided by Andrey
Kramarenko.

https://bugzilla.samba.org/show_bug.cgi?id=11455

Upgrade relevant ports to the latest releases.

PR:		202041

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

Upgrade talloc to 2.1.2 version, needed for samba42

Add a new USES=waf to handle the waf building system, allowing to factorise code
Plug waf into MAKE_CMD and CONFIGURE_CMD so the regular defined targets can be
reused

Always define _MAKE_JOBS so that when bsd.port.mk will stop overwritting
_MAKE_JOBS when parallel jobs are disabled we can enforce -j1 (which is needed
to really disable parallelisation with waf

WAF_CMD has been created to allow one to override the location of the waf script
relatively to WRKSRC

CONFIGURE_TARGET is by default defined to "configure"
ALL_TARGET is by default defined to "build"
INSTALL_TARGET is by default defined to "install"

USES=waf is by default stagedir safe

Upgrade supplimentary net/samba ports to the minimal common required versions.

- Convert ports of devel/ to USES=python

Approved by:	portmgr (implicit)

Convert the Python framework bits to USES=python.

Please use USES=python instead of USE_PYTHON.

  USE_PYTHON=yes becomes USES=python
  USE_PYTHON=2.7+ becomes USES=python:2.7+
  USE_PYTHON_BUILD=3.3 becomes USES=python:3.3,build
  ...

A new PYTHON_FEATURES variable was added, which enables certain features for a
port and replaces some knobs at the same time;

  PYTHON_FEATURES=distutils replaces USE_PYDISTUTILS
  PYTHON_FEATURES=autoplist replaces PYDISTUTILS_AUTOPLIST
  PYTHON_FEATURES=py3kplist replaces PYTHON_PY3K_PLIST_HACK

A couple ports added support for OPTIONS but forgot to add them to
OPTIONS_DEFINE.

Add NO_PYTHON knob to make lev@ a bit happier. Minor version update of tdb.

On whatever reason configure requires gettext, although it's not used anywhere
in the resulting libs. Explicitly disable this.

Didn't commit all the changes due wrong command line

Convert port to support STAGE

Stage support

Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 4)

- Remove last vestiges of MAKE_JOBS_SAFE knob

Approved by:	portmgr (bapt)

- Fix build after the recent lang/python changes

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

Update relevant ports to the latest release and fix disappeared --prefix
from the bsd.ports.mk.

PR:		180102, 180103, 180136

- adoption of optionsNG
- trim historical headers

Approved by:	portmgr (miwi)

Convert devel to USES=pkgconfig

Update port to the latest version

- strict python version to 2.x (doesn't build with python3)

PR:		170074
Submitted by:	Kimmo Paasiala <kpaasial at gmail dot com>
Approved by:	timur (maintainer)

Fix damage cause by commits of eadler and miwi

- Respect LOCALBASE

- Get ready for upcoming X11BASE removal
- While here remove useless portepoch
- Pet portlint

Approved by:    portmgr (pav)

Update port version to 2.0.7

Update to version 2.0.5

-remove MD5

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

Missed some cleanup

Upgrade talloc to the new version 2.0.1.

Fix CONFLICTS

Adding slave ports for the net/samba4-devel. We are installing this
libraries separately, so they can be used by other ports.