Qt5: Update to 5.15.13

Update devel/pyside2* and devel/shiboken to 5.15.13

Update www/qt5-webengine to latest commit. Python 3.x support has been
integrated upstream, so local patches have been removed.

Release note:
https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.13/release-note.md

devel/py-setuptools-scm: update to 8.0.4

Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.

Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.

Further details: https://wiki.freebsd.org/Python/setuptools

Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288

Qt5: Update to 5.15.12

Update devel/pyside2* and devel/shiboken2 to 5.15.12

Release note:
https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.12/release-note.md

Qt5: Update to 5.15.11

Update devel/pyside2* and devel/shiboken2 to 5.15.11

Release note:
https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.11/release-note.md

Qt5: Update to 5.15.10

Update devel/qt5-script* and www/qt5-webengine to 5.15.15-lts
Update devel/pyside2* and devel/shiboken2 to 5.15.10

Release note:
https://code.qt.io/cgit/qt/qtreleasenotes.git/about/qt/5.15.10/release-note.md

PR:		273934
Exp-run by:	antoine

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

audio/opus: bump consumers after update to 1.4

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel/pyside2*: optionize webengine support

PR:		262558
Approved by:	tcberner

cleanup: remove transitive py27 deprecation (www/qt5-webengine)

misc/qtchooser: remove

QtChooser allows you to select your version of Qt among those installed.
However, this tool is no longer supported upstream and will not be
available for Qt6.
By default, our Qt installations are done in
${LOCALBASE}/lib/qt${QT_VERSION} as recommended.

We have added symbolic linking for the main binaries to
${LOCALBASE}/bin with the suffix -qt5.

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Mark ports recursively depending on Python 2.7 for expiration on June 23.

For ports optionally dependending on Python 2.7, just mark those options
as expired. Remove konquerer from the x11/kde-baseapps metaport and bump
its PORTREVISION.

Submitted by:	rene
Reviewed by:	portmgr, adridg, ehaupt, lme, madpilot, pizzamig, se, sunpoet, yuri
Approved by:	portmgr
Differential Revision:	https://reviews.freebsd.org/D28665

PySide pass maintainership to kde@

PySide is the "official" QT/Python-binding and should be under the same
maintainership as qt.

Approved by:	cmt (via email)

Update Qt/PySide2 to 5.15.2 / PyQt to 5.15.1 / SIP to 5.4.0
This commit combines several updates.

- Update Qt to 5.12.2
- Update PyQt to 5.15.1
- Since PySide 5.15.1 is broken with Qt 5.15.2, so PySide and Shiboken are also
updated to 5.15.2.
- Update sip to 5.4.0

SIP is a collection of tools  to create Python bindings for C and C++ libraries
and used by PyQt and wxPython. There are some changes with sip5 [1]:
- python 3.5+ is required
- sip drops support of old deprecated methods as sipdistutils & cie.
- this version breaks also PyQt5 extension ABI. SIP files will be installed in
${PYTHON_SITELIBDIR}/PyQt${_PYQT_VERSION}/bindings
- some ports will use the new pyqtbuilder package with the pyproject.toml setup.
Instead if the project have a setup.py, you should use sip-build to build it.
- if a port needs sip, it should also needs pysip. BTW, py-qt5-core requires
pysip, so that should be enough for PyQt packages.

update pyside2 to 5.15.1

devel/pyside2: disable webengine on non-x86

Port builds fine without webengine on powerpc64.

remove leftovers from pyside2 ports

python 2 support was removed from these ports in r531621, but I forgot
to remove the python2/python3 switcheroo from pkg-plist back then.

update pyside2 and friends to 5.15.0

following the Qt 5 upgrade.
bump cad/freecad for "needed shared library changed"

update pyside2 to 5.14.2.2

https://lists.qt-project.org/pipermail/pyside/2020-May/002965.html

pyside2 and friends: update to 5.14.2.1

Announcement:
  https://lists.qt-project.org/pipermail/pyside/2020-April/002951.html

update devel/pyside2 and friends to 5.14.2

following r531601 (Qt 5.14.2), PySide2 can be updated, too
- pyside2-tools don't bring their own pyside2-rcc and pyside2-uic but
  use Qt's rcc and uic - patch cad/freecad to handle that
- remove Python 2 support: it's going to go away soon anyway, it did
  complicate these ports a lot, and it would have required more
  workarounds in FreeCAD when using Qt's rcc instead of the old pyside2-rcc.
- while here, do some polishing in freecad's makefile

devel/pyside2: add more qt5 dependencies

Qt5RemoteObjects is an "optional" module for pyside2 - it will be picked
up automatically when qt5-remoteobjects is found during pyside2's build.
Add it to enable the full functionality of pyside2, and to avoid staging
errors in unclean environments. [1]
The Qt53DExtras module may pull in qt5-gamepad (another contaminated-
build-issue is suspected), depend on qt5-gamepad to avoid breakage in
case this had happened with qt53DExtras. [1]
While here, remove some now-obsolete staging area cleanup, the files are
not installed anymore by the port. [2]

PR:		241855
Reported by:	rhurlin@gwdg.de [1]

update "Qt for Python" to 5.13.2

that's shiboken2, pyside2, pyside2-tools

Announcement:
  https://lists.qt-project.org/pipermail/pyside/2019-November/002803.html

The distfile now uses a slightly different naming.

devel/pyside2 and friends: update to 5.13.1

Announcement:
  https://lists.qt-project.org/pipermail/pyside/2019-September/002786.html

While here, pet portlint. Bump FreeCAD, pyside2's consumer

update PySide2 ports to 5.12.3

Announcement: https://lists.qt-project.org/pipermail/pyside/2019-May/002734.html

another stab at fixing the build of devel/pyside2

the QtWebEngineWidgets submodule depends on the QtWebEngineCore submodule,
but that internal dependency wasn't reflected in the CMakeLists.

another shot at fixing pyside2's build

the failure is still not reproducable, but I'm still getting fallout
mails. the log files seem to be pointing at a build order problem,
that is, a undeclared dependency between targets. set MAKE_JOBS_UNSAFE
until I figured out what exactly is missing, and to get out some
packages, and to reduce fallout mails.

blind-fix build of devel/pyside2

pyside2 fails to build on the package cluster, e.g.
http://beefy5.nyi.freebsd.org/data/120i386-default/498628/logs/py27-pyside2-5.12.2.log
I cannot reproduce that failure locally, but I sincerly hope that the
additional patch fixes it. Add a comment, else I'll forget that patch
is required.
While here, update the pre-existing patch file to reduce confusion when
looking at patch and code (patch was fine with the file, which did surprise
me).

update pyside2 ports to 5.12.2

now that we have Qt 5.12.2, pyside2, pyside2-tools and shiboken2 follow

devel/pyside2: fix dependencies in QtWebEngineWidgets

This fixes a failing build on some platforms (reproducable: 11.2 i386).
On most platforms, the build succeeded by pure luck only.

Reported by:	pkg-fallout

Clean up MASTER_SITE_SUBDIR usage

pyside2 etc al: fix Python flavors

shared library (and other files, too) naming is very different between
python 2 and python 3 variants, this makes things harder than I would
like them to be.

Reported by:	pkg-fallout

add PySide2 - Python Binding for Qt5

keeping the organization of the old pyside ports, this is split in
pyside2, pyside2-tools and shiboken2