15:41 rene 

Mark QT4 ports/functionality for removal on 2019-03-15

While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.

Submitted by:	tcberner
Reviewed by:	adridg, jhale, rene, tcberner
Approved by:	portmgr (implicit, flavor hook)
Differential Revision:	https://reviews.freebsd.org/D17741

 

20:18 tcberner 

pyqt: Change install directories for Python flavor support

* PyQt could not be installed for multiple Python versions at
  the same time, as there were conflicting files.

  This patch creates Python-version versioned directories for
  all these, and further installs binaries with a version number.

* Note, there might be some hickups for software that depends on
  on of the .so's provided by PyQt5, which might not be found
  anymore autmotically, and maybe need some LD-flaggery.

* Update PyQt5 to 5.10.1

* Mark www/py-qt5-webengine broken. It is unforuntately no longer
  compatible with the old qt5-webengine-5.9.4 we ship.

PR:		232745
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D8714

 

16:19 tcberner 

Update the QScintilla2 ports to 2.10.4

 

20:06 jrm 

New ports: www/py-qt5-webchannel and www/py-qt5-webengine

Reviewed by:    mat, tcberner
Approved by:	tcberner
Differential Revision:	https://reviews.freebsd.org/D12964

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

16:49 rakuco 

PyQt: Replace bsd.pyqt.mk with Uses/pyqt.mk.

In preparation for landing PyQt5 ports, generalize devel/py-qt4's
bsd.pyqt.mk and make it a proper file in Uses/.

Ports wishing to depend on PyQt4 ports can now do the following:
  USES=		pyqt:4
  USE_PYQT=	foo bar_build baz_run

Other changes include the renaming of the PYQT4_DIST variable to PYQT_DIST
and the introduction of the PYQT_SIPDIR plist substitution variable. The
rest of the contents of Uses/pyqt.mk are pretty much identical to what we
had in bsd.pyqt.mk with additional processing of USE_PYQT.

Even though this patch touches files in many different ports, the goal is
for it to be a no-op from an end-user perspective (so that the basic
infrastructure is landed before the other, riskier changes): no dependencies
have been changed, PyQt/SIP/QScintilla have not been upgraded and the plists
should remain exactly the same, since PYQT_SIPDIR currently contains the
same value that used to be hardcoded in the plists.

Huge thanks to Guido Falsi (madpilot@) for spearheading most of the work: he
took the initiative to work on PyQt5 and sent D2910 to Phabricator with the
original version of this patch. Tobias Berner (tcberner@gmail.com) later
applied it to kde@'s experimental area51 repositories and did some more work
on it.

 

18:49 rakuco 

Convert to USES=metaport, take 2.

This time, also stop setting MASTER_SITES and do not override the existing
USES entry, which broke the build.

 

08:20 antoine 

Revert broken conversion to USES=metaport

With hat:	portmgr

 

19:22 rakuco 

Convert kde@ ports to USES=metaport.

Submitted by:	alonso@

 

23:20 rakuco 

Update PyQt and its dependencies.

* PyQt4 has been updated to 4.11.3.
* QScintilla has been updated to 2.8.4.
* SIP has been updated to 4.16.5.

This update is much smaller than the previous one, as there has been no
further need for clean ups in the ports infrastructure.

Pretty much the entire patch set has been originally contributed by Tobias
Berner, who sent it to the KDE on FreeBSD mailing list. Thanks a lot!

PR:		198016
Submitted by:	Tobias Berner <tcberner@gmail.com>

 

18:25 alonso 

Replace USE_PYTHON* by USES=python.

This commit consists of area51's r10314 and r10356 patchsets.

Approved by:	rakuco (mentor)

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

19:53 rakuco 

Update PyQt to 4.11.1, QScintilla to 2.8.3 and SIP to 4.16.2.

... And bump PORTREVISION on ports that depend on devel/qscintilla2 due to
the shlib version change.

This is brought to you by the KDE on FreeBSD team. Besides updating to newer
upstream releases, this commit also contains a lot of under-the-hood changes
to the PyQt/QScintilla/SIP ports. Their Makefiles had accumulated a lot of
cruft over time, so it was time for some summer cleaning:

- General, belated changes:
  * Use OPTIONS helpers wherever possible, stop including
    <bsd.port.options.mk> when not necessary, stop checking for
    ${PORT_OPTIONS:MDOCS} and ${PORT_OPTIONS:MEXAMPLES} when not necessary,
    add options such as DOCS and/or DEBUG where they were only checked for.

- QScintilla ports:
  * Drop the API option from py-qt4-qscintilla2. It had been broken ever
    since staging support was added, and its existence does not make much
    sense: QScintilla is a hard dependency regardless of the state of this
    option anyway, they all come from the same tarball and the configuration
    script assumes the .api file will always be installed.

- PyQt ports:
  * The configure.py patch shared by all PyQt ports has been trimmed down to
    the minimum. Changes for Qt3 compatibility or for things that are just
    not needed anymore have been removed.

  * Several post-configure targets in the PyQt ports have been removed, as
    they had no effect on the way the ports were built whatsoever.

  * In some cases, instead of calling Python's py_compile.py on `ls *.py
    */*.py */*/*.py` to generate .pyc and .pyo files, we just call
    compileall.py, which is made for this kind of task.

  * The patch + sed hack to build py-qt4-dbussupport has been replaced by
    only extracting the dbus/ directory for that port and excluding it from
    all others.

  * Move the bulk of the code in all Makefiles to bsd.pyqt.mk, like the
    non-Python Qt ports do with bsd.qt.mk and the QT_DIST variable. A large
    portion of all PyQt Makefiles were very similar and contained a lot of
    boilerplate code that can be shared among all of them since they all
    come from the same tarball. bsd.pyqt.mk now has a PYQT4_DIST variable
    that, when set, automatically sets several common variables and the
    do-configure target for a port. This allows us to considerably reduce
    the size of all the py-qt4-* Makefiles.

  * To make the above possible and also to allow us to use as many OPTIONS
    helpers as possible, the ARGS variable is now called CONFIGURE_ARGS.
    That's what it was used for anyway.

PR:		191990

 

14:31 makc 

- Bump PORTREVISION after KDE4_PREFIX change

 

14:24 makc 

devel/py-qt4:
- Improve comment
- Use options helpers
- Add options for all PyQt4 ports

 

21:52 rakuco 

Update SIP to 4.15.2 and PyQt to 4.10.3.

This commit also adds proper staging support to all the ports being updated.

In collaboration with Schaich Alonso <alonsoschaich@fastmail.fm> and
Tomasz Kowalczyk <kowalczfbsd@gmail.com>.

 

17:13 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

 

18:16 makc 

KDE/FreeBSD team presents:
 SIP 4.14.3
 QScintilla 2.7
 PyQt 4.9.6

The area51 repository features commits by jhale and myself.

Changes:
- Trim Makefile header
- Convert to new option framework

 

19:47 makc 

KDE FreeBSD team is glad to present Qt 4.7.1 in ports.

Along with Qt4 the following ports are updated:

PyQt4 ports to 4.8.1
devel/py-sip to 4.11.2
devel/qscintilla2 to 2.4.5
PyKDE3 to 3.16.7
PyQt3 tp 3.18.2-snapshot-20091119

New ports added:
devel/qt4-declarative
devel/py-qt4-declarative
x11/qt4-graphicssystems-opengl

This release has been contributed by:
Thomas Abthorpe (tabthorpe)
Max Brazhnikov (makc)
Dima Panov (fluffy)
Alberto Villa (avilla)

We'd like to thank Martin Wilke (miwi) for exp-run.

22:48 makc 

Respect NOPORTEXAMPLES
Fix build

Reported by:    QAT

10:43 fluffy 

- The FreeBSD KDE team is pleased to announce SIP-4.10.2, PyQt-4.7.3
        and QScintilla-2.4.3 for FreeBSD.

With hat on:    kde@

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

14:27 fluffy 

The KDE FreeBSD team is proud to announce the release of SIP-4.10 and
PyQt-4.7 for FreeBSD. The official update notes can be found at
http://www.riverbankcomputing.com

We'd like to say thanks to all helpers, testers and submitters.