| non port: devel/py-pyface/Makefile |
|
SVNWeb
|
Number of commits found: 27 |
|
Tue, 18 Jul 2023
|
[ 00:53 Charlie Li (vishwin)  ]    9a80a6e (Only the first 10 of 309 ports in this commit are shown above.  )
devel/py-setuptools: convert individual consumers to ${PY_SETUPTOOLS}
Currently a no-op, but in the future outputs the correct setuptools
port depending on whether USES_PYTHON=distutils is specified.
With hat: python
PR: 270510, 270358
|
|
Thu, 1 Jun 2023
|
[ 08:33 Nuno Teixeira (eduardo) ] b9d6edc
devel/py-pyface: Update to 8.0.0
- Switch to pep517 build
ChangeLog: https://docs.enthought.com/pyface/changelog.html#release-8-0-0
|
|
Tue, 25 Apr 2023
|
[ 15:17 Christian Weisgerber (naddy) ] feb1fa3 (Only the first 10 of 1613 ports in this commit are shown above. )
audio/opus: bump consumers after update to 1.4
|
|
Wed, 11 Jan 2023
|
[ 15:58 Dmitry Marakasov (amdmi3) ] 77d6847 (Only the first 10 of 3335 ports in this commit are shown above. )
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt
|
|
Sun, 1 Jan 2023
|
[ 11:54 Nuno Teixeira (eduardo) ] a6759ca
devel/py-pyface: Update to 7.4.4
ChangeLog: https://github.com/enthought/pyface/releases/tag/7.4.4
|
|
Sun, 18 Dec 2022
|
[ 09:23 Nuno Teixeira (eduardo) ] 49b3932
devel/py-pyface: Update to 7.4.3
ChangeLog: https://github.com/enthought/pyface/releases/tag/7.4.3
|
|
Sun, 11 Sep 2022
|
[ 10:20 Felix Palmen (zirias) ] ddae4e9 (Only the first 10 of 1105 ports in this commit are shown above. )
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
[ 09:45 Nuno Teixeira (eduardo) ] d9e455e
devel/py-pyface: Update to 7.4.2
ChangeLog: https://docs.enthought.com/pyface/changelog.html#release-7-4-2
|
|
Fri, 24 Jun 2022
|
[ 21:39 Nuno Teixeira (eduardo) ] 694bcf4
devel/py-pyface: Adopt/Update to 7.4.1
ChangeLog: https://docs.enthought.com/pyface/changelog.html
|
|
Mon, 7 Mar 2022
|
[ 17:39 Loïc Bartoletti (lbartoletti) ] 2d8f8573 (Only the first 10 of 75 ports in this commit are shown above. )
devel/py-qt5, devel/py-sip: Update versions
- Update sip to 6.5.1
- Update PyQt5 to 5.15.6
- Update PyQtChart, PyQtNetworkAuth and PyQtWebengine to 5.15.5
- Update PyQtSip to 12.9.1
- Update PyQtBuilder to 1.12.2
- Add ${_MAKE_JOBS} for pyqt.mk (reported by Tatsuki Makino)
PR: 261685
Exp-run by: antoine
|
|
Thu, 27 Jan 2022
|
[ 06:12 Loïc Bartoletti (lbartoletti) ] 4f0a5e1 (Only the first 10 of 205 ports in this commit are shown above. )
PyQt: Update sip to 6.5.0, reintroduce sip4 and simplify PyQt framework.
SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.
PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.
This allows us to be in adequacy with the packages that the author of these (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 25 Jan 2022
|
[ 19:22 Kai Knoblich (kai) ] bb93287
*/*: Maintainer reset
Drop maintainership of all ports as his own request. We thank Vladimir
for all his efforts and hope to welcome him back in the future.
PR: 261391
Approved by: Vladimir Chukharev (maintainer)
MFH: 2022Q1
|
|
Sun, 20 Jun 2021
|
[ 16:16 Po-Chuan Hsieh (sunpoet) ] b6ff671
devel/py-pyface: Remove PY_PYGMENTS
With hat: python
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Fri, 22 Jan 2021
|
[ 17:22 yuri ]  
devel/py-pyface: Update 6.1.2 -> 7.2.0
PR: 252909
Approved by: Vladimir.Chukharev@gmail.com (maintainer)
|
|
Tue, 20 Oct 2020
|
[ 07:02 antoine ]
Unbreak bulk -a
|
|
Mon, 21 Sep 2020
|
[ 12:12 antoine ] (Only the first 10 of 20 ports in this commit are shown above. )
Use the PY_PYGMENTS variable
With hat: portmgr
|
|
Tue, 9 Jun 2020
|
[ 11:11 kai ]
devel/py-pyface: Update to 6.1.2
* Introduce new default option QT5 [1] to let the port make use of the Qt5
toolkit.
* Add a "do-test" target, which also makes use of the recently added
enhancements to pyqt.mk that were introduced in r537134, to make future QA
easier.
Changelog since 6.1.2:
https://github.com/enthought/pyface/blob/6.1.2/CHANGES.txt
PR: 239576
Submitted by: vladimir.chukharev@gmail.com (maintainer)
Reviewed by: koobs, maintainer
Approved by: vladimir.chukharev@gmail.com (maintainer) [1]
Differential Revision: https://reviews.freebsd.org/D21792
|
|
Sat, 6 Jul 2019
|
[ 18:09 swills ]
devel/py-pyface: update to 6.1.1
PR: 238974
Submitted by: vladimir.chukharev@gmail.com (maintainer)
|
|
Sun, 30 Jun 2019
|
[ 19:36 swills ]
devel/py-pyface: remove concurrent
PR: 238440
Submitted by: vladimir.chukharev@gmail.com
|
[ 19:33 swills ]
devel/py-pyface: Update to 6.1.0
PR: 238440
Submitted by: vladimir.chukharev@gmail.com (maintainer)
|
|
Wed, 20 Jun 2018
|
[ 17:05 mat ] (Only the first 10 of 1617 ports in this commit are shown above. )
Use PY_FLAVOR for dependencies.
FLAVOR is the current port's flavor, it should not be used outside of
this scope.
Sponsored by: Absolight
|
|
Sun, 3 Jun 2018
|
[ 12:57 miwi ]
- Update to 6.0.0
PR: 228095
Submitted by: maintainer
Sponsored by: iXsystems Inc.
|
|
Thu, 30 Nov 2017
|
[ 15:50 mat ] (Only the first 10 of 2423 ports in this commit are shown above. )
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above )
|
|
Thu, 4 Aug 2016
|
[ 18:02 pi ]
New port: devel/py-pyface
The pyface project contains a toolkit-independent GUI abstraction
layer, which is used to support the "visualization" features of the
Traits package. Thus, you can write code in terms of the Traits API
(views, items, editors, etc.), and let pyface and your selected
toolkit and back-end take care of the details
of displaying them.
The following GUI backends are supported:
* wxPython
* PyQt
* PySide
WWW: https://docs.enthought.com/pyface
PR: 204432
Submitted by: Vladimir Chukharev <vladimir.chukharev@gmail.com>
|
Number of commits found: 27 |
As an Amazon Associate I earn from qualifying purchases.