notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Want a good monitor light? See my photosAll times are UTC
Ukraine
This referral link gives you 10% off a Fastmail.com account and gives me a discount on my Fastmail account.

Get notified when packages are built

A new feature has been added. FreshPorts already tracks package built by the FreeBSD project. This information is displayed on each port page. You can now get an email when FreshPorts notices a new package is available for something on one of your watch lists. However, you must opt into that. Click on Report Subscriptions on the right, and New Package Notification box, and click on Update.

Finally, under Watch Lists, click on ABI Package Subscriptions to select your ABI (e.g. FreeBSD:14:amd64) & package set (latest/quarterly) combination for a given watch list. This is what FreshPorts will look for.

Port details
py-configobj Simple but powerful config file reader and writer
5.0.8 devel on this many watch lists=12 search for ports that depend on this port An older version of this port was marked as vulnerable. Find issues related to this port Report an issue related to this port View this port on Repology. pkg-fallout 5.0.8Version of this port present on the latest quarterly branch.
Maintainer: nivit@FreeBSD.org search for ports maintained by this maintainer
Port Added: 2006-11-20 01:08:33
Last Update: 2023-07-18 00:53:09
Commit Hash: 9a80a6e
People watching this port, also watch:: py39-cffi, py39-parsedatetime, py39-idna, py39-pycparser, libffi
Also Listed In: python
License: BSD3CLAUSE
WWW:
https://github.com/DiffSK/configobj/
Description:
ConfigObj is a simple but powerful config file reader and writer: an ini file round tripper. Its main feature is that it is very easy to use, with a straightforward programmer's interface and a simple syntax for config file.
Homepage    cgit ¦ Codeberg ¦ GitHub ¦ GitLab ¦ SVNWeb

Manual pages:
FreshPorts has no man page information for this port.
pkg-plist: as obtained via: make generate-plist
There is no configure plist information for this port.
Dependency lines:
  • ${PYTHON_PKGNAMEPREFIX}configobj>0:devel/py-configobj@${PY_FLAVOR}
To install the port:
cd /usr/ports/devel/py-configobj/ && make install clean
To add the package, run one of these commands:
  • pkg install devel/py-configobj
  • pkg install py39-configobj
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-configobj listed in the above command, you can pick from the names under the Packages section.
PKGNAME: py39-configobj
Package flavors (<flavor>: <package>)
  • py39: py39-configobj
distinfo:
TIMESTAMP = 1681224723 SHA256 (configobj-5.0.8.tar.gz) = 6f704434a07dc4f4dc7c9a745172c1cad449feb548febd9f7fe362629c627a97 SIZE (configobj-5.0.8.tar.gz) = 38012

Packages (timestamps in pop-ups are UTC):
py37-configobj
ABIaarch64amd64armv6armv7i386powerpcpowerpc64powerpc64le
FreeBSD:13:latest--5.0.6_1---5.0.6_1-
FreeBSD:13:quarterly--------
FreeBSD:14:latest--------
FreeBSD:14:quarterly--------
FreeBSD:15:latest--n/a-n/a---
 

py39-configobj
ABIaarch64amd64armv6armv7i386powerpcpowerpc64powerpc64le
FreeBSD:13:latest5.0.85.0.8-5.0.85.0.8---
FreeBSD:13:quarterly5.0.85.0.85.0.85.0.85.0.85.0.85.0.85.0.8
FreeBSD:14:latest5.0.85.0.85.0.6_15.0.85.0.85.0.8-5.0.8
FreeBSD:14:quarterly5.0.85.0.8-5.0.85.0.85.0.85.0.85.0.8
FreeBSD:15:latest5.0.85.0.8n/a5.0.8n/a5.0.85.0.85.0.8
 

Dependencies
NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
Build dependencies:
  1. py39-setuptools>0 : devel/py-setuptools@py39
  2. py39-wheel>=0.40.0 : devel/py-wheel@py39
  3. python3.9 : lang/python39
  4. py39-build>=0 : devel/py-build@py39
  5. py39-installer>=0 : devel/py-installer@py39
Test dependencies:
  1. python3.9 : lang/python39
Runtime dependencies:
  1. py39-six>0 : devel/py-six@py39
  2. python3.9 : lang/python39
This port is required by:
for Build
  1. devel/brz
  2. security/py-certbot

Deleted ports which required this port:

Expand this list of 1 deleted port
  1. science/psychopy*
  2. Collapse this list of deleted ports.
for Run
  1. audio/puddletag
  2. databases/py-litecli
  3. databases/py-mycli
  4. databases/py-pgcli
  5. deskutils/py-khal
  6. deskutils/py-khard
  7. devel/brz
Expand this list (25 items / 18 hidden - sorry, this count includes any deleted ports)
  1. Collapse this list).
  2. devel/py-apptools
  3. devel/py-cli-helpers
  4. games/pysolfc
  5. graphics/variety
  6. mail/py-alot
  7. misc/pubs
  8. net/cloud-init
  9. net/cloud-init-devel
  10. news/sabnzbd
  11. science/dvc
  12. security/py-certbot
  13. x11/terminator
  14. Collapse this list.

Deleted ports which required this port:

Expand this list of 6 deleted ports
  1. emulators/dynagen*
  2. net/cloud-init-azure*
  3. net/py-coherence*
  4. news/sabnzbdplus*
  5. security/py-letsencrypt*
  6. www/py-turbogears*
  7. Collapse this list of deleted ports.
* - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...

Configuration Options:
No options to configure
Options name:
devel_py-configobj
USES:
python
FreshPorts was unable to extract/find any pkg message
Master Sites:
Expand this list (2 items)
Collapse this list.
  1. https://files.pythonhosted.org/packages/source/c/configobj/
  2. https://pypi.org/packages/source/c/configobj/
Collapse this list.

Number of commits found: 33

Commit History - (may be incomplete: for full details, see links to repositories near top of page)
CommitCreditsLog message
5.0.8
18 Jul 2023 00:53:09
commit hash: 9a80a6ee5e8ebf5c279b3d7a9e7e8b7dbabbaf0acommit hash: 9a80a6ee5e8ebf5c279b3d7a9e7e8b7dbabbaf0acommit hash: 9a80a6ee5e8ebf5c279b3d7a9e7e8b7dbabbaf0acommit hash: 9a80a6ee5e8ebf5c279b3d7a9e7e8b7dbabbaf0a files touched by this commit
Charlie Li (vishwin) search for other commits by this committer
devel/py-setuptools: convert individual consumers to ${PY_SETUPTOOLS}

Currently a no-op, but in the future outputs the correct setuptools
port depending on whether USES_PYTHON=distutils is specified.

With hat: python
PR: 270510, 270358
5.0.8
27 Jun 2023 19:34:34
commit hash: 3d9a815d9c5acbb71f4bb07738bdeab4879feacbcommit hash: 3d9a815d9c5acbb71f4bb07738bdeab4879feacbcommit hash: 3d9a815d9c5acbb71f4bb07738bdeab4879feacbcommit hash: 3d9a815d9c5acbb71f4bb07738bdeab4879feacb files touched by this commit
Rene Ladan (rene) search for other commits by this committer
all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>
5.0.8
11 Apr 2023 16:26:21
commit hash: 84a27df350fff754c3292723848ea29d46c65c5ccommit hash: 84a27df350fff754c3292723848ea29d46c65c5ccommit hash: 84a27df350fff754c3292723848ea29d46c65c5ccommit hash: 84a27df350fff754c3292723848ea29d46c65c5c files touched by this commit
Nicola Vitale (nivit) search for other commits by this committer
devel/py-configobj: Update to 5.0.8

- Convert to PEP-517
- Add license file
5.0.6_1
11 Jan 2023 15:58:34
commit hash: 77d68471aded6907dbbcb5ef50d557e4c69db656commit hash: 77d68471aded6907dbbcb5ef50d557e4c69db656commit hash: 77d68471aded6907dbbcb5ef50d557e4c69db656commit hash: 77d68471aded6907dbbcb5ef50d557e4c69db656 files touched by this commit This port version is marked as vulnerable.
Dmitry Marakasov (amdmi3) search for other commits by this committer
*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt
07 Sep 2022 21:58:51
commit hash: fb16dfecae4a6efac9f3a78e0b759fb7a3c53de4commit hash: fb16dfecae4a6efac9f3a78e0b759fb7a3c53de4commit hash: fb16dfecae4a6efac9f3a78e0b759fb7a3c53de4commit hash: fb16dfecae4a6efac9f3a78e0b759fb7a3c53de4 files touched by this commit
Stefan Eßer (se) search for other commits by this committer
Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)
5.0.6_1
07 Sep 2022 21:10:59
commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52 files touched by this commit This port version is marked as vulnerable.
Stefan Eßer (se) search for other commits by this committer
Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
5.0.6_1
20 Jul 2022 14:21:35
commit hash: aa6eefd5e663357e8223399bc38c7987f5e35746commit hash: aa6eefd5e663357e8223399bc38c7987f5e35746commit hash: aa6eefd5e663357e8223399bc38c7987f5e35746commit hash: aa6eefd5e663357e8223399bc38c7987f5e35746 files touched by this commit This port version is marked as vulnerable.
Tobias C. Berner (tcberner) search for other commits by this committer
devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
(Only the first 15 lines of the commit message are shown above View all of this commit message)
5.0.6_1
11 May 2021 21:47:32
commit hash: dd5e14360557f11183d01518dde9eb1b38e51bcbcommit hash: dd5e14360557f11183d01518dde9eb1b38e51bcbcommit hash: dd5e14360557f11183d01518dde9eb1b38e51bcbcommit hash: dd5e14360557f11183d01518dde9eb1b38e51bcb files touched by this commit This port version is marked as vulnerable.
Po-Chuan Hsieh (sunpoet) search for other commits by this committer
devel/py-configobj: Add NO_ARCH

Approved by:	portmgr (blanket)
5.0.6_1
06 Apr 2021 14:31:07
commit hash: 305f148f482daf30dcf728039d03d019f88344ebcommit hash: 305f148f482daf30dcf728039d03d019f88344ebcommit hash: 305f148f482daf30dcf728039d03d019f88344ebcommit hash: 305f148f482daf30dcf728039d03d019f88344eb files touched by this commit This port version is marked as vulnerable.
Mathieu Arnold (mat) search for other commits by this committer
Remove # $FreeBSD$ from Makefiles.
5.0.6_1
28 Dec 2020 23:02:15
Revision:559531Original commit files touched by this commit This port version is marked as vulnerable.
antoine search for other commits by this committer
Drop python 2.7 support from a few ports

With hat:	portmgr
5.0.6_1
20 Jun 2018 17:05:44
Revision:472884Original commit files touched by this commit This port version is marked as vulnerable.
mat search for other commits by this committer
Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight
5.0.6_1
30 Nov 2017 15:50:34
Revision:455210Original commit files touched by this commit Sanity Test Failure This port version is marked as vulnerable.
mat search for other commits by this committer
Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
(Only the first 15 lines of the commit message are shown above View all of this commit message)
5.0.6_1
01 Apr 2016 14:00:57
Revision:412346Original commit files touched by this commit This port version is marked as vulnerable.
mat search for other commits by this committer
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight
5.0.6_1
26 Sep 2015 14:27:12
Revision:397982Original commit files touched by this commit This port version is marked as vulnerable.
nivit search for other commits by this committer
- Add devel/py-six to run dependencies [1]
- Bump PORTREVISION (changed dependencies)
- Sort values of USE_PYTHON variable

PR:	199463 [1]
Submitted by:	Pavel Volkov <pavelivolkov@gmail.com>
5.0.6
24 Jan 2015 13:25:15
Revision:377790Original commit files touched by this commit This port version is marked as vulnerable.
nivit search for other commits by this committer
- Update to 5.0.6 [1]
- Use CHEESESHOP as download site
- Remove patches under files/
- Update WWW address

PR:	194630 [1]
Submitted by:	Olivier Cochard <olivier@cochard.me> [1]
4.7.2_1
09 Nov 2014 09:07:05
Revision:372347Original commit files touched by this commit This port version is marked as vulnerable.
marino search for other commits by this committer
devel/py-configobj: Fix building on Python 3

PR:		194125
Submitted by:	Matteo Cypriani
Approved by:	maintainer timeout
4.7.2
20 Oct 2014 16:04:14
Revision:371280Original commit files touched by this commit This port version is marked as vulnerable.
mva search for other commits by this committer
- Convert ports of devel/ to USES=python

Approved by:	portmgr (implicit)
07 Mar 2014 16:49:10
Revision:347405Original commit files touched by this commit Sanity Test Failure Refresh
bapt search for other commits by this committer
Convert d* to USES=zip
4.7.2
03 Mar 2014 03:15:28
Revision:346852Original commit files touched by this commit This port version is marked as vulnerable.
miwi search for other commits by this committer
- Stage support
- Generate auto-plist
4.7.2
20 Sep 2013 17:13:47
Revision:327724Original commit files touched by this commit This port version is marked as vulnerable.
bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
4.7.2
12 Apr 2012 02:30:54
Original commit files touched by this commit This port version is marked as vulnerable.
ak search for other commits by this committer
Fix various errors in ports distinfo
(yii-1.1.9.r3527.tar.gz verified against upstream sources)
4.7.2
03 Jul 2011 14:59:23
Original commit files touched by this commit This port version is marked as vulnerable.
ohauer search for other commits by this committer
-remove MD5
4.7.2
09 Sep 2010 01:46:32
Original commit files touched by this commit This port version is marked as vulnerable.
pgollucci search for other commits by this committer
- Update to 4.7.2

PR:             ports/148876
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>
Approved by:    maintainer timeout (nivit ; 48 days)
4.6.0
22 Aug 2009 00:18:43
Original commit files touched by this commit This port version is marked as vulnerable.
amdmi3 search for other commits by this committer
- Switch SourceForge ports to the new File Release System: categories starting
with D
4.6.0
28 May 2009 12:57:59
Original commit files touched by this commit This port version is marked as vulnerable.
nivit search for other commits by this committer
- Update to 4.6.0
- Add googlecode.com to MASTER_SITES
4.5.3
19 Jan 2009 21:33:58
Original commit files touched by this commit This port version is marked as vulnerable.
nivit search for other commits by this committer
- Remove CONFLICTS (with www/py-turbogears)
4.5.3
25 Jul 2008 14:07:29
Original commit files touched by this commit This port version is marked as vulnerable.
nivit search for other commits by this committer
- Update to 4.5.3
- Remove PORTDOCS=*
- Use ${COPYTREE_SHARE} to install docs
- Use ${PKGNAMEPREFIX} instead of py- inside DOCSDIR
4.5.2
09 Apr 2008 22:10:11
Original commit files touched by this commit This port version is marked as vulnerable.
nivit search for other commits by this committer
- Update to 4.5.2
4.5.1
25 Feb 2008 17:55:22
Original commit files touched by this commit This port version is marked as vulnerable.
nivit search for other commits by this committer
- Update to 4.5.1
4.4.0
20 Feb 2007 16:43:09
Original commit files touched by this commit This port version is marked as vulnerable.
nivit search for other commits by this committer
- Updated to 4.4.0
- Set CONFLICTS=py-*-TurboGears-[0-9]*, because TG requires (and installs) a
Python egg of this module
- Fixed PKGNAMEPREFIX
4.3.2
15 Dec 2006 19:46:21
Original commit files touched by this commit This port version is marked as vulnerable.
nivit search for other commits by this committer
- Grabbed maintainership

Approved by:    alexbl (mentor)
4.3.2
13 Dec 2006 12:56:01
Original commit files touched by this commit This port version is marked as vulnerable.
linimon search for other commits by this committer
Reset whitekid@gmail.com after timeouts and no response to email.

Hat:            portmgr
4.3.2
18 Nov 2006 23:50:50
Original commit files touched by this commit This port version is marked as vulnerable.
miwi search for other commits by this committer
ConfigObj is a simple but powerful config file reader and writer: an ini file
round tripper. Its main feature is that it is very easy to use, with a
straightforward programmer's interface and a simple syntax for config file

WWW:    http://www.voidspace.org.uk/python/configobj.html

PR:             ports/104597
Submitted by:   Choe, Cheng-Dae

Number of commits found: 33