non port: devel/p5-POE-Stage/Makefile |
SVNWeb
|
Number of commits found: 20 |
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Sat, 6 Oct 2018
|
[ 13:06 des ] (Only the first 10 of 2492 ports in this commit are shown above. )
Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.
Approved by: portmgr (adamw)
|
Tue, 11 Apr 2017
|
[ 15:21 mat ] (Only the first 10 of 31 ports in this commit are shown above. )
Make defining both PORTVERSION and DISTVERSION a DEV_ERROR.
There are two cases:
- The upstream versionning is compatible with our versionning, or using
DISTVERSION's magic leads to a compatible PORTVERSION, use
DISTVERSION. If it is possible to use DISTVERSIONPREFIX and
DISTVERSIONSUFFIX to make it compatible, use them.
- The upstream versionning is not compatible with our versionning, and
DISTVERSION's magic does not lead to a correct PORTVERSION, then set
PORTVERSION to the equivalent of our versionning, and set DISTNAME.
It is possible to use a third variable where you store upstream's
version and use it to compute PORTVERSION and/or DISTNAME, like the
dns/bind9* ports do.
Sponsored by: Absolight
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
Wed, 26 Nov 2014
|
[ 13:08 mat ] (Only the first 10 of 10077 ports in this commit are shown above. )
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above )
|
Thu, 31 Oct 2013
|
[ 06:20 vanilla ] (Only the first 10 of 97 ports in this commit are shown above. )
Support STAGEDIR.
|
Fri, 20 Sep 2013
|
[ 17:13 bapt ] (Only the first 10 of 2998 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
|
Fri, 2 Aug 2013
|
[ 18:52 mat ] (Only the first 10 of 1871 ports in this commit are shown above. )
- Convert to new perl framework
- Trim Makefile header
- Remove MAKE_JOBS_SAFE=yes, it's the default.
|
Thu, 10 May 2012
|
[ 13:29 swills ]
- Fix version going backwards
|
Wed, 9 May 2012
|
[ 11:14 swills ]
- Update to 0.060
PR: ports/166653
Submitted by: Mel Flynn <rflynn@acsalaska.net>
|
Mon, 7 May 2012
|
[ 15:42 skv ] (Only the first 10 of 165 ports in this commit are shown above. )
Pass maintainership of almost of my "p5-*" ports to "perl@".
(I hope updating of them will be improved).
|
Sat, 21 Jan 2012
|
[ 17:40 eadler ] (Only the first 10 of 1326 ports in this commit are shown above. )
At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.
Explicit duplication > := > = and this just moves ports one step to the left
Approved by: portmgr
|
Thu, 28 Jan 2010
|
[ 22:37 kuriyama ] (Only the first 10 of 20 ports in this commit are shown above. )
- Remove unneeded dependencies which is in perl-5.8.9 dist
(part 14).
Approved by: portmgr (itetcu)
|
Thu, 17 Apr 2008
|
[ 14:30 araujo ] (Only the first 10 of 2168 ports in this commit are shown above. )
- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.
PR: ports/122674
Submitted by: Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by: araujo (myself)
Approved by: portmgr (pav)
|
Tue, 15 Jan 2008
|
[ 22:19 skv ]
Update to 0.03
Changes: http://search.cpan.org/src/RCAPUTO/POE-Stage-0.03/CHANGES
|
Thu, 27 Sep 2007
|
[ 21:32 skv ]
Update to 0.02
Changes: http://search.cpan.org/src/RCAPUTO/POE-Stage-0.02_00/CHANGES
|
Sat, 3 Mar 2007
|
[ 13:34 skv ]
Update to 0.01_00
Changes: http://search.cpan.org/src/RCAPUTO/POE-Stage-0.01_00/CHANGES
|
Sun, 9 Jul 2006
|
[ 11:58 skv ]
Add p5-POE-Stage 0.0082, base class for formalized POE components.
|
Number of commits found: 20 |