| non port: devel/okteta/Makefile |
|
SVNWeb
|
Number of commits found: 44 |
|
Tue, 25 Apr 2023
|
[ 15:17 Christian Weisgerber (naddy)  ]    feb1fa3 (Only the first 10 of 1613 ports in this commit are shown above.  )
audio/opus: bump consumers after update to 1.4
|
|
Mon, 9 Jan 2023
|
[ 18:14 Tobias C. Berner (tcberner) ] d6ac16e
devel/okteta: update to 0.26.10
Changes since 0.26.9:
* Improved: translations
* Improved: Skip bookmark on current position for next/previous
navigation
|
|
Sun, 11 Sep 2022
|
[ 10:20 Felix Palmen (zirias) ] ddae4e9 (Only the first 10 of 1105 ports in this commit are shown above. )
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Mon, 5 Sep 2022
|
[ 19:06 Dima Panov (fluffy) ] f3c0b7d
devel/okteta: pet stage-qa
|
|
Fri, 26 Aug 2022
|
[ 06:30 Tobias C. Berner (tcberner) ] 630a8a1 (Only the first 10 of 27 ports in this commit are shown above. )
devel/qca: add flavors for Qt 5 and Qt 6
|
|
Sat, 11 Jun 2022
|
[ 19:27 Tobias C. Berner (tcberner) ] 2e57353
devel/okteta: update to 0.26.9
|
|
Wed, 18 May 2022
|
[ 04:50 Tobias C. Berner (tcberner) ] c69646e
devel/okteta: update to 0.26.8
Changes since 0.26.7:
* Fixed: Float 32-bit editor in decoding table tool no longer rejects
negative values & decimal places
* Fixed: PNG structure definition example now ensures use of big
endianness
* Improved: translations
* Improved: have more text vertically centered in lists in tool views
* Changed: no more use of fixed font type for any list headers in tool
views
|
|
Tue, 22 Feb 2022
|
[ 19:27 Tobias C. Berner (tcberner) ] 22961ae
devel/okteta: update to 0.26.7
|
|
Wed, 7 Apr 2021
|
[ 08:09 Mathieu Arnold (mat) ] cf118cc (Only the first 10 of 8873 ports in this commit are shown above. )
One more small cleanup, forgotten yesterday.
Reported by: lwhsu
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Mon, 29 Mar 2021
|
[ 16:59 tcberner ]  
devel/okteta: update to 0.26.6
|
|
Thu, 4 Feb 2021
|
[ 13:04 adridg ]
Restore PORTEPOCH in devel/okteta
I had removed this, blindly seeing "something below DISTVERSION" and
thinking it was PORTREVISION. Restore order to the world and/or
version numbers. As erwin@ / portscout puts it:
"A common error is an accidental deletion of PORTEPOCH."
Reported by: portscout
|
|
Wed, 3 Feb 2021
|
[ 11:18 adridg ]
Update devel/okteta to latest upstream commit
Okteta is a viewer and editor for raw file data (aka "hex editor").
It provides "hex editor" libraries for other applications as well.
Changes since 0.26.4:
* Improved: Structure definitions allow custom pointer interpretations in JS
* Improved: cursor flash time setting of 0 (= no blinking) supported
* Improved: cursor shows char/value in background color instead of blank
* Improved: new menu entry for selecting custom UI color scheme
* Improved: less deprecated Qt/KF code usage
* Improved: translations
Reported by: portscout
|
|
Wed, 29 Jul 2020
|
[ 15:51 tcberner ]
devel/okteta: update to 0.26.4
|
|
Sat, 21 Mar 2020
|
[ 07:24 tcberner ] (Only the first 10 of 31 ports in this commit are shown above. )
devel/qca: update to 2.3
- qca-2.3 drop support for OSSL<1.1
- copy devel/qca to devel/qca-legacy which is held at the current version
- update devel/qca to 2.3
- Add Uses/qca.mk which handles dependency on either of the ports depending on
the FreeBSD version
Users on FreeBSD11 must therefore change their pkg orign a la:
pkg set -o devel/qca:devel/qca-legacy
PR: 244682
Exp-run by: antoine
Reviewed by: arrowd
Differential Revision: https://reviews.freebsd.org/D24042
|
|
Mon, 3 Feb 2020
|
[ 15:22 tcberner ]
devel/okteta: update to 0.26.3
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Tue, 2 Jul 2019
|
[ 19:26 tcberner ]
devel/okteta: update to 0.26.2
|
|
Fri, 26 Apr 2019
|
[ 21:28 adridg ]
Update devel/okteta to the latest version.
https://www.kde.org/applications/utilities/okteta
* Fixed: bad offset of elements in statusbar
* Translations improved (cs, en_GB, ga, lv, nn, pt)
While here, bump consumer devel/kdevelop (also the library names
have changed in innovative ways) and devel/kdesdk (which was still
worried about the KDE4 version of okteta).
|
|
Sat, 16 Mar 2019
|
[ 20:16 tcberner ] (Only the first 10 of 28 ports in this commit are shown above. )
devel/qca: remove flavors (Qt4 deprecation)
|
|
Wed, 16 Jan 2019
|
[ 11:13 tijl ] (Only the first 10 of 1089 ports in this commit are shown above. )
Fix Qt5 symbol version scripts to put the catch-all clause first. When
a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 5 Jan 2019
|
[ 10:32 tcberner ]
devel/okteta: update to 0.25.5
|
|
Tue, 25 Dec 2018
|
[ 20:25 tcberner ] (Only the first 10 of 1277 ports in this commit are shown above. )
Change cmake default behaviour to outsource.
Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".
I tried to only set insource where explictely needed.
PR: 232038
Exp-run by: antoine
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
|
Sun, 4 Nov 2018
|
[ 19:00 tcberner ] (Only the first 10 of 187 ports in this commit are shown above. )
Merge lang/qt5-qml and x11-toolkits/qt5-quick into x11-toolkits/qt5-declarative
- There was no obvious reason to split these ports, and it makes
porting simpler; the set of ports using either mostly coincided.
Exp-run by: antoine
PR: 223687
PR: 232751
|
|
Sat, 27 Oct 2018
|
[ 11:50 tcberner ] (Only the first 10 of 62 ports in this commit are shown above. )
Fix build with GCC-based architectures for various kde@ ports.
- Qt5 required c++11 support.
Submitted by: Piotr Kubaj <pkubaj@anongoth.pl>
PR: 232726
PR: 232725
PR: 232723
PR: 232722
PR: 232721
PR: 232720
PR: 232719
PR: 232697
PR: 232682
PR: 232669 (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 6 Oct 2018
|
[ 19:40 tcberner ]
devel/okteta: update to 0.25.3
- while here, fix up pkg-descr
|
|
Thu, 28 Jun 2018
|
[ 17:39 tcberner ] (Only the first 10 of 1416 ports in this commit are shown above. )
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
|
|
Sat, 28 Apr 2018
|
[ 18:11 tcberner ] (Only the first 10 of 342 ports in this commit are shown above. )
Update KDE Applications to 18.04.0
* Pin multimedia/kdelive at 17.12.3 until we import the mlt update from the
dev-repo.
|
|
Sat, 14 Apr 2018
|
[ 11:09 tcberner ] (Only the first 10 of 34 ports in this commit are shown above. )
devel/qca, devel/qca-qt5 -- create flavors
Approved by: portmgr (mat)
Differential Revision: https://reviews.freebsd.org/D14651
|
|
Mon, 9 Apr 2018
|
[ 19:19 tcberner ] (Only the first 10 of 47 ports in this commit are shown above. )
New ports: KDE Applications devel/
* devel/cervisia
* devel/kapptemplate
* devel/kcachegrind
* devel/kde-dev-scripts
* devel/kde-dev-utils
* devel/kdesdk-thumbnailers
* devel/kio-extras
* devel/lokalize
* devel/okteta
* devel/poxml
* devel/umbrello
This is the current version of KDE Applications <foo>.
Note that users of KDE SC4 should stick with <foo>-kde4.
|
|
Sat, 10 Feb 2018
|
[ 10:29 tcberner ] (Only the first 10 of 444 ports in this commit are shown above. )
Rename KDE4 meta ports
This is done for
* consistency,
* and to simplify the import of the newer KDE Plasma5 desktop and KDE
applications
Bumps the dependencies.
Reviewed by: adridg
Differential Revision: https://reviews.freebsd.org/D12979
|
|
Tue, 25 Apr 2017
|
[ 08:20 riggs ] (Only the first 10 of 701 ports in this commit are shown above. )
Chase ffmpeg 3.3 update (ABI changes)
PR: 218658
Submitted by: riggs
|
|
Tue, 18 Oct 2016
|
[ 17:22 tcberner ] (Only the first 10 of 168 ports in this commit are shown above. )
Introduce new extensible virtual categories for KDE
A lot of KDE Ports share MASTERSITES, LICENSE and so one, as they are
released as a bundle upstream, however, there was not really a clean
way to share this information.
Using these new categories, we can simplify the Makefiles for the diverse
KDE ports.
At the moment we support the virtual category
* kde-kde4
In the future, this will be extended to
* kde-frameworks
* kde-plasma
* kde-applications
PR: 213406
Differential Revision: https://reviews.freebsd.org/D7645
Exp-run by : antoine
Reviewed by: mat, rakuco
Approved by: portmgr (mat), rakuco (mentor)
|
|
Wed, 24 Aug 2016
|
[ 08:20 tcberner ] (Only the first 10 of 364 ports in this commit are shown above. )
Replace Mk/bsd.kde4.mk by Mk/Uses/kde.mk in preparation for KDE Frameworks and
Plasma5 ports
At the moment KDE ports use bsd.kde4.mk to handle their dependencies. When
working on the ports for KDE Frameworks and Plasma5 it seemed to be more
reasonable to create a new kde.mk instead of adding an bsd.kde5.mk.
The kde.mk in this review is a stripped down version of the one we are using in
the KDE Test repositories plasma5 branch [1] to only contain the parts relevant
to the current KDE4 ports in the portstree [2].
Changes to the KDE Ports needed by this:
Replace USE_KDE4 by USE_KDE [3]
Add USES=kde:4 [4] (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 25 May 2016
|
[ 20:56 rene ] (Only the first 10 of 328 ports in this commit are shown above. )
Remove expired misc/kdehier4 and update all of its consumers to not reference it
any
longer. This is a no-op because KDE4_PREFIX is equal to LOCALBASE
Fix up properties for misc/kde4-l10n/files/bsd.l10n.mk to make svn happy.
PR: 209014 (partial)
Submitted by: myself
Approved by: portmgr (bapt)
Differential Revision: https://reviews.freebsd.org/D6542
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Tue, 15 Mar 2016
|
[ 12:35 rakuco ] (Only the first 10 of 123 ports in this commit are shown above. )
Change header installation location for kdelibs4-based ports.
Install x11/kdelibs4's headers into include/kde4 instead of include (which
consequently causes several other ports to have their installation paths
changed too).
The idea behind this is to reduce path conflicts between KDE4 ports and the
upcoming KDE Frameworks 5 ports that will be installed into include/KF5. If
we continue installing the KDE4 headers into include/, we can end up in a
situation like this:
c++ [...] -I/usr/local/include -I/usr/local/include/KF5 file.cpp
If the KDE4 and KF5 versions of a port have the same headers, the KDE4 port
will unintentionally be picked up first and the build will fail.(Only the first 15 lines of the commit message are shown above )
|
|
Sun, 19 Oct 2014
|
[ 15:57 makc ] (Only the first 10 of 785 ports in this commit are shown above. )
KDE/FreeBSD team presents KDE SC 4.14.2 and KDE Workspace 4.11.13!
USE_KDE4=kdehier component has been deprecated, new components added:
baloo - Baloo core libraries
baloo-widgets - Baloo widgets library
kfilemetadata - KDE library for extracting file metadata
New ports:
graphics/kqtquickcharts - QtQuick plugin to render interactive charts
misc/artikulate - Pronunciation trainer for KDE
(not usable currently, links to both
GStreamer 1.x and 0.10.x via dependencies)
sysutils/baloo[-widgets] - KDE framework for searching and
managing user metadata
sysutils/kfilemetadata - Library for extracting file metadata (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Fri, 15 Aug 2014
|
[ 20:37 mandree ] (Only the first 10 of 522 ports in this commit are shown above. )
Upgrade OpenEXR and ilmbase to 2.2.0.
GCC 4.2 in FreeBSD 8.X/9.X base is now too old to compile OpenEXR, so
GCC-based systems will upgrade to the default ports compiler (GCC 4.7
currently.)
Add two patches to OpenEXR to permit building it in a live system with
the older OpenEXR version installed. Bug report filed to upstream Github
at https://github.com/openexr/openexr/issues/130
Couple OpenEXR more tightly to ilmbase and require its exact .so
version.
Add UPDATING note, and bump PORTREVISION of all dependent ports.
Proto-STAGE hugin-devel, and mark it IGNORE because hugin is newer.
Approved by: portmgr (implicit for bumping PORTREVISION on unstaged ports)
|
|
Thu, 3 Apr 2014
|
[ 09:49 makc ] (Only the first 10 of 411 ports in this commit are shown above. )
KDE/FreeBSD team presents KDE SC 4.12.4 and KDE Workspace 4.11.8!
KDE ports:
- Convert to USES=tar:xz
devel/p5-perlqt, multimedia/kdemultimedia4-ffmpegthumbs:
- Convert LIB_DEPENDS to new style
devel/p5-perlqt, devel/p5-perlkde:
- Don't remove directories installed by perl port
net/kdnssd:
- moved to net/zeroconf-ioslave (renamed upstream)
x11/kdelibs4:
- Clean up non-standard shared mime files and directories after deinstall
The area51 repository features commits by Alonso Schaich
<alonsoschaich@fastmail.fm> and makc.
|
|
Tue, 18 Feb 2014
|
[ 14:23 makc ] (Only the first 10 of 779 ports in this commit are shown above. )
KDE/FreeBSD team presents KDE SC 4.12.2 and KDE Workspace 4.11.6!
Among changes:
- Switch KDE4_PREFIX to ${LOCALBASE}
- Remove now needless misc/kde4-shared-mime-info port
- Add stage support
- Remove ancient CONFLICTS (KDE 4.9 and less) and LATEST_LINK
- Squeeze MASTER_SITES/MASTER_SITE_SUBDIR
- Convert LIB_DEPENDS to new style
- Use options helpers
- Drop support for FreeBSD 7.x
- Remove Qt/KDE 3 related workarounds
- Remove local patches and use upstream version scheme for libraries
- sysutils/kdeadmin4, net/kdenetwork4, devel/kdesdk4,
and x11-clocks/kdetoys4 ports have been split.(Only the first 15 lines of the commit message are shown above )
|
Number of commits found: 44 |
As an Amazon Associate I earn from qualifying purchases.