devel/kyra: fix build on non-x86

Fun fact: for some reason base GCC on 12.2-RELEASE on powerpc64 can build this
port without this patch even though __GNUC__ is defined.

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

Remove # $FreeBSD$ from Makefiles.

Add USES=xorg USES=gl, ports categories d

Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories
starting with 'd'.

devel/kyra: Fix build with Clang 6

engine.cpp:454:27: error: non-constant-expression cannot be narrowed from type
'int' to 'Sint16' (aka 'short') in initializer list [-Wc++11-narrowing]
                                        SDL_Rect sdlrect = { rect.min.x,
rect.min.y, rect.Width(), rect.Height() };
                                                             ^~~~~~~~~~

http://beefy11.nyi.freebsd.org/data/head-i386-default/p477696_s338122/logs/errors/kyra-2.1.3_4.log

Try to bring some consistency to ports that have x86-specific pieces.

 - in general, if we think that the code is not architecture-specific,
   and instead just enables x86 assembler by default, those should
   use BROKEN rather than IGNORE.  This will allow them to be attempted
   with TRYBROKEN.
 - spell i386 as x86.
 - spell asm as assembler.
 - pet portlint.

These changes should have no effect on tier-1 builds.

Approved by:	portmgr (tier-2 blanket)

For ports that are marked BROKEN on armv6, and also fail to build on
armv7, mark them so.

This is part two of a multipart commit to bring armv7 ports to parity
with armv6.

Approved by:	portmgr (tier-2 blanket)
Obtained from:	lonesome.com -exp run

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

Mark various ports as broken on armv6: invokes x86 asm.

Approved by:	portmgr (tier-2 blanket)

Mark as broken on various tier-2 archs.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Convert to USES=jpeg

Add a patch to allow building with libc++ r224926

PR:		ports/196604
Submitted by:	dim@

Bump portrevision after png update

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

Cleanup plist

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

- Add staging support
- Convert to new LIB_DEPENDS format

Fix typo

Convert d* to USES=zip

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

- Update to 2.1.3

PR:		v176562
Submitted by:	Ports Fury

- update png to 1.5.10

- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions

Tested by:      exp-run by pav

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

-remove MD5

Sync to new bsd.autotools.mk

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Update devel/sdl12 to version 1.2.14.
- Update audio/sdl_mixer to version 1.2.11.
- Update graphics/sdl_gfx to version 2.0.20.
- Update graphics/sdl_image to version 1.2.10.
- Bump portrevisions for all ports depending on audio/sdl_mixer and
  graphics/sdl_image.
- Update Mk/bsd.sdl.mk accordingly for the new shared lib versions.

PR:             ports/142147 ports/142248 ports/142249
Approved by:    miwi (mentor implicit)

- Switch SourceForge ports to the new File Release System: categories starting
with D

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- update to jpeg7
Tested by:      pav on pointyhat

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Chase devel/sdl12 shlib version bump

- Fix build with gcc 4.2

PR:             118010
Submitted by:   Pietro Cerutti <gahr@gahr.ch>
Approved by:    portmgr (erwin,linimon)

BROKEN with gcc 4.2

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Use libtool port instead of included version to avoid objformat a.out botch

 - Update devel/sdl12 to version 1.2.11. Now we employ stock SDL directory
   structure (i.e. include/SDL for includes and sdl-config for configuration
   binary)
 - Update graphics/sdl_ttf to version 2.0.8
 - Update graphics/sdl_image to version 1.2.5
 - Update audio/sdl_mixer to version 1.2.7
 - Update net/sdl_net to version 1.2.6
 - Update Mk/bsd.sdl.mk accordingly
 - Fix dependent ports to fit the new directory structure and avoid several
   API breakages
 - Bump up portrevisions for all dependent ports to allow them to be upgraded
   by portupgrade/portmaster etc tools

Approved by:    kris (portmgr), sem (mentor)

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include comms/ converters/ databases/ devel/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Chase updated URLs per distfile survey.

- Add some SHA256 checksums

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

change the libtool version to use from 1.3 to 1.5

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

- Fix COMMENT format
- Reaarange USE_GNONE

PR:             ports/64855
Submitted by:   Ports Fury

Chase library bump of libSDL-1.1 for all ports which were depending
on sdl12-1.2.5

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

SIZEify.

- Use new knobs from bsd.sdl.mk

Approved by:    portmgr

- Drop maintainership to ports@

- Don't install useless *.la

Submitted by:   ijliao

- Update to 2.0.7

Utilize USD_SDL

Change my mail to @FreeBSD.org

Approved by:    fjoe (mentor)

Update to 2.0.5

PR:             52839
Submitted by:   maintainer

New port: kyra

Kyra is a simple Sprite engine written in C++.

PR:             52007
Submitted by:   Kirill Ponomarew