| non port: devel/guile-lib/Makefile |
|
SVNWeb
|
Number of commits found: 28 |
|
Mon, 31 Jul 2023
|
[ 16:39 Po-Chuan Hsieh (sunpoet)  ]    09bc2aa
devel/guile-lib: Cosmetic change
|
|
Sun, 30 Jul 2023
|
[ 22:59 Robert Clausecker (fuz) Author: Andrew "RhodiumToad" Gierth ] 7edcfae (Only the first 10 of 69 ports in this commit are shown above.  )
*/*: adapt to new guile framework
- change all ports using guile to USES=guile
- flavorize guile-lib, guile-cairo, slib-guile
PR: 260960
Reported by: Martin Neubauer <m.ne@gmx.net>
Approved by: bofh
Differential Revision: https://reviews.freebsd.org/D40194
|
|
Fri, 30 Jun 2023
|
[ 07:01 Po-Chuan Hsieh (sunpoet) ] e5c3896
devel/guile-lib: Update to 0.2.7
- Update pkg-descr
- Take maintainership
Changes: https://www.nongnu.org/guile-lib/news/
|
|
Thu, 25 May 2023
|
[ 09:39 Robert Clausecker (fuz) ] 5d67d41
devel/guile-lib: unbreak on armv7
Builds just fine.
Approved by: portmgr (build fix blanket)
Reported by: andrew@tao11.riddles.org.uk
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] aa6eefd (Only the first 10 of 5087 ports in this commit are shown above. )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 21 Sep 2021
|
[ 13:47 Ryan Steinmetz (zi) ] 8703fc2 (Only the first 10 of 16 ports in this commit are shown above. )
*/*: Reset MAINTAINER due to repeat fatal email bounces
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Thu, 27 Jun 2019
|
[ 09:02 danfe ]   (Only the first 10 of 33 ports in this commit are shown above. )
Update Guile to version 2.2.5, modern stable version, and fix dependent
ports to build against it. Most changes are rather minor and mechanical
except for the devel/gdb (obtained via their bugtracker [1], courtesy of
Doug Evans). One port (science/meep) I had to mark BROKEN after fixing
it proved to be very tedious and actually unreliable. It is very old,
there are newer versions available so it should be fixed by updating.
One port (devel/libruin) had revealed a bug in the new Guile code (an
auxiliary script, really) that had to be worked-round; reference to the
problematic upstream commit is provided in the patch.
PR: 229613
Exp-run by: antoine
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=21104#c8
|
|
Sat, 10 Nov 2018
|
[ 18:12 bapt ] (Only the first 10 of 386 ports in this commit are shown above. )
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
|
|
Mon, 20 Aug 2018
|
[ 21:03 swills ]
devel/guile-lib: Update to 0.2.6.1
While here, assign maintainer
PR: 230742
Submitted by: Nathan <ndowens@yahoo.com>
|
|
Thu, 30 Nov 2017
|
[ 06:13 linimon ] (Only the first 10 of 189 ports in this commit are shown above. )
For ports that are marked BROKEN on armv6, and also fail to build on
armv7, mark them so.
This is part two of a multipart commit to bring armv7 ports to parity
with armv6.
Approved by: portmgr (tier-2 blanket)
Obtained from: lonesome.com -exp run
|
|
Fri, 26 May 2017
|
[ 20:02 linimon ] (Only the first 10 of 32 ports in this commit are shown above. )
Mark some ports failing on armv6, for errors classified as "???".
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
|
|
Thu, 15 Sep 2016
|
[ 01:41 swills ] (Only the first 10 of 193 ports in this commit are shown above. )
Unmark broken on powerpc64
These ports built successfully
|
|
Thu, 21 Apr 2016
|
[ 16:43 swills ] (Only the first 10 of 419 ports in this commit are shown above. )
many ports: mark broken on powerpc64
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Thu, 6 Mar 2014
|
[ 15:08 miwi ]
- Stage support
|
|
Fri, 20 Sep 2013
|
[ 17:04 bapt ] (Only the first 10 of 482 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 2)
|
|
Sat, 2 Mar 2013
|
[ 14:46 miwi ]
- Update to 0.2.2
- Trim header
PR: 176570
Submitted by: ports fury
|
|
Tue, 6 Sep 2011
|
[ 12:51 jlaffaye ]
Update to 0.2.1
PR: ports/159432
Submitted by: KATO Tsuguru <tkato432@yahoo.com>
|
|
Sun, 31 Jul 2011
|
[ 15:07 jlaffaye ] (Only the first 10 of 41 ports in this commit are shown above. )
- Chase guile shared lib bump
- Add an entry to UPDATING
|
|
Tue, 28 Dec 2010
|
[ 06:31 linimon ] (Only the first 10 of 31 ports in this commit are shown above. )
Reset ijliao@FreeBSD.org due to maintainer-timeouts and long absence.
We hope to see ijliao back again sometime.
Hat: portmgr
|
|
Thu, 22 Jan 2009
|
[ 16:04 miwi ] (Only the first 10 of 33 ports in this commit are shown above. )
- Chase lang/guile shlib bump
|
|
Mon, 21 Jul 2008
|
[ 04:49 rafan ] (Only the first 10 of 33 ports in this commit are shown above. )
- Chase lang/guile share library version bump (.18 -> .19)
- Bump PORTREVISION
PR: ports/125435
|
|
Fri, 6 Jun 2008
|
[ 13:21 edwin ] (Only the first 10 of 367 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Thu, 25 Oct 2007
|
[ 06:57 ijliao ]
upgrade to 0.1.6
|
|
Mon, 23 Jul 2007
|
[ 09:36 rafan ] (Only the first 10 of 437 ports in this commit are shown above. )
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
|
|
Thu, 22 Mar 2007
|
[ 09:36 ijliao ]
add guile-lib 0.1.3
A down-scaled, limited-scope CPAN for Guile
|
Number of commits found: 28 |
As an Amazon Associate I earn from qualifying purchases.