| non port: devel/gperf/Makefile |
|
SVNWeb
|
Number of commits found: 33 |
|
Tue, 2 May 2023
|
[ 17:11 Dirk Meyer (dinoex)  ]    984b20b
devel/gperf: fix build with clang 16
PR: 271030
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Fri, 29 Oct 2021
|
[ 09:50 Stefan Eßer (se) ] 819f25b (Only the first 10 of 388 ports in this commit are shown above. )
*/*: Remove redundant '-[0-9]*' from CONFLICTS
The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").
Many CONFLICTS definitions used patterns like "bash-[0-9]*" to filter
for the bash package in any version. But that pattern is functionally
identical with just "bash".
Approved by: portmgr (blanket)
|
|
Mon, 18 Oct 2021
|
[ 19:25 Stefan Eßer (se) ] 9c54f1f
devel/gperf: Add CPE information
Approved by: portmgr (blanket)
|
|
Wed, 7 Apr 2021
|
[ 08:09 Mathieu Arnold (mat) ] cf118cc (Only the first 10 of 8873 ports in this commit are shown above. )
One more small cleanup, forgotten yesterday.
Reported by: lwhsu
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Wed, 1 Jan 2020
|
[ 20:53 dinoex ]   (Only the first 10 of 14 ports in this commit are shown above. )
- update to 3.1
|
|
Sat, 10 Nov 2018
|
[ 18:12 bapt ] (Only the first 10 of 386 ports in this commit are shown above. )
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
|
|
Wed, 9 May 2018
|
[ 21:40 sunpoet ]
Add LICENSE_FILE
- Convert to test framework
Approved by: portmgr (blanket)
|
|
Wed, 11 Jan 2017
|
[ 08:37 dinoex ]
- ignore gperf 3.1 update
|
|
Thu, 14 May 2015
|
[ 10:15 mat ] (Only the first 10 of 1814 ports in this commit are shown above. )
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
|
|
Sun, 19 Oct 2014
|
[ 11:23 dinoex ]
- Add Apple's gperf enhancements (GPLv2)
PR: 193964
Submitted by: Pedro F. Giffuni
Obtained from: http://opensource.apple.com/source/gperf/gperf-9/patches/
|
|
Sun, 30 Mar 2014
|
[ 19:46 dinoex ]
- be more verbose
|
|
Mon, 28 Oct 2013
|
[ 20:17 dinoex ] (Only the first 10 of 29 ports in this commit are shown above. )
- revert r331810
|
[ 05:18 dinoex ]
- use STAGEDIR
|
|
Sat, 21 Sep 2013
|
[ 11:06 dinoex ] (Only the first 10 of 129 ports in this commit are shown above. )
- fix misplaced NO_STAGE in slaveports and ifdefs
|
|
Fri, 20 Sep 2013
|
[ 17:04 bapt ] (Only the first 10 of 482 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 2)
|
|
Sat, 13 Oct 2012
|
[ 13:39 dinoex ] (Only the first 10 of 174 ports in this commit are shown above. )
- cleanup comments
Feature safe: yes
|
|
Fri, 4 Jun 2010
|
[ 13:49 dinoex ] (Only the first 10 of 96 ports in this commit are shown above. )
LICENSE GPLv2
|
|
Wed, 30 Sep 2009
|
[ 11:17 dinoex ]
- add CONFLICTS
Submitted by: Wesley Shields
Feature safe: yes
|
|
Wed, 29 Apr 2009
|
[ 01:48 pgollucci ]
- Mark MAKE_JOBS_UNSAFE=yes
Approved by: linimon (via irc on #bsdports)
Tested on: RideCharge TB, P6 TB
|
|
Thu, 19 Mar 2009
|
[ 19:41 dinoex ]
- add PORTSCOUT
|
|
Mon, 7 Jul 2008
|
[ 02:24 dinoex ]
- add regression-test
Submitted by: Pedro (pfgshield-freebsd at yahoo.com)
|
|
Mon, 23 Jul 2007
|
[ 09:36 rafan ] (Only the first 10 of 437 ports in this commit are shown above. )
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
|
|
Fri, 25 May 2007
|
[ 03:33 dinoex ]
- update to 3.0.3
|
|
Sat, 7 Oct 2006
|
[ 18:48 dinoex ]
- udpate to 3.0.2
|
|
Sun, 4 Dec 2005
|
[ 23:35 edwin ] (Only the first 10 of 17 ports in this commit are shown above. )
Remove install-info from Makefile, it's automatically done when INFO is defined
|
|
Wed, 7 Apr 2004
|
[ 20:19 dinoex ]
- use INFO
|
|
Mon, 29 Dec 2003
|
[ 06:26 dinoex ]
- update to 3.0.1
|
|
Fri, 3 Oct 2003
|
[ 12:18 dinoex ]
- use %%DOCSDIR%%
- add info pages to the index
|
|
Thu, 20 Feb 2003
|
[ 18:26 dinoex ] (Only the first 10 of 70 ports in this commit are shown above. )
- add COMMENT
|
|
Sun, 24 Jun 2001
|
[ 05:28 dinoex ] (Only the first 10 of 22 ports in this commit are shown above. )
change MAINTAINER to FreeBSD.org address
|
|
Thu, 30 Nov 2000
|
[ 21:18 ade ]
Update to 2.7.2
|
Number of commits found: 33 |
As an Amazon Associate I earn from qualifying purchases.