15:23 gerald 

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

 

13:39 gerald 

Also mark DEPRECATED due to this being "dead" and having an actively
maintainer replacement with lang/pocl.

Pull in EXPIRATION_DATE to 2017-03-31.

PR:		204393
Approved by:	maintainer (O. Hartmann <ohartmann@walstatt.org>)

 

16:00 mat 

Mark the remaining ports depending on Google Code as DEPRECATED, with an
EXPIRATION_DATE at the end of April 2017.

In the past six months, about a third of the ports marked BROKEN because
they were hosted on Google Code have been fixed.  The remaining must not
be of use to anyone.

With hat:	portmgr
Sponsored by:	Absolight

 

09:38 gerald 

Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

In particular that is ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.

 

15:59 mat 

GOOGLE_CODE has gone away.

- If a port has another upstream, remove GOOGLE_CODE
- If a port only has GOOGLE_CODE mark it BROKEN

Some ports have a local mirror configured but for security reasons, it
is not considered upstream.

Sponsored by:	Absolight

 

16:43 swills 

many ports: mark broken on powerpc64

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

10:51 rakuco 

Uses/cmake.mk: Replace CMAKE_ENV with CONFIGURE_ENV.

Instead of defining a variable that is almost always based on CONFIGURE_ENV,
just use CONFIGURE_ENV directly.

This also matches the behavior of other ports that do not use autotools (so
most ports can just worry about CONFIGURE_ENV). Additionally, the fact that
we do not use ?= means we do not have problems if another file in Uses/
needs to set CONFIGURE_ENV (with CMAKE_ENV, the order of the arguments to
USES would matter).

Ports which set CMAKE_ENV have been adjusted accordingly. In most cases,
CMAKE_ENV was just replaced with CONFIGURE_ENV, the exceptions being:
* databases/sqliteman: CMAKE_ENV line removed; setting QMAKESPEC there has
                       no effect on the build system.
* devel/freeocl: CMAKE_ENV line removed; FREEOCL_CXX_COMPILER is already
                 retrieved from the CMAKE_CXX_COMPILER variable in the build
                 system.
* graphics/openimageio: CMAKE_ENV line removed; setting Qt variables there
                        has no effect on the build system.

Reviewed by:		makc
Differential Revision:	https://reviews.freebsd.org/D3403

 

01:37 amdmi3 

- Fix build on pre-10.x by requiring newer compiler
- Fix build on i386 by enabling sse support

Submitted by:	pkg-fallout
Approved by:	portmgr blanket

 

10:15 mat 

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

 

19:14 rodrigo 

- fix compiler settings and flags
- define conflicts regarding other ocl, openocl and pocl ports
- add license
- extend pkg-descr and add WWW link

PR:		ports/179180
Submitted by:	ohartman@zedat.fu-berlin.de
Approved by:	mentors (implicit)

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

17:21 rakuco 

Fix the build by including xmmintr.h in a few places.

PR:		191595
Submitted by:	ohartman@zedat.fu-berlin.de (maintainer)
MFH:		2014Q3

 

21:54 marino 

devel/freeocl: Bump for builders

PR:		189322
Submitted by:	maintainer (ohartman)
Reported by:	pkg-fallout

 

20:55 gerald 

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

 

07:40 miwi 

- Stage support

 

18:48 makc 

- Respect CMAKE_BUILD_TYPE

Approved by:	portmgr (bapt)

 

00:52 gerald 

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui
 - 0^0, which returned (NaN,NaN) previously, now returns (1,+0).
 - Removed compatibility with K&R compilers, which was untestable due
   to lack of such compilers.
 - New functions
   . mpc_log10
   . mpc_mul_2si, mpc_div_2si
 - Speed-ups
   . mpc_fma
 - Bug fixes
   . mpc_div and mpc_norm now return a value indicating the effective
     rounding direction, as the other functions.
   . mpc_mul, mpc_sqr and mpc_norm now return correct results even if
     there are over- or underflows during the computation.
   . mpc_asin, mpc_proj, mpc_sqr: Wrong result when input variable has
     infinite part and equals output variable is corrected.
   . mpc_fr_sub: Wrong return value for imaginary part is corrected.

Convert to the new LIB_DEPENDS standard and remove hard-coded
.so versions from a couple of dependent ports.

Bump PORTREVISIONS of all dependent ports.

PR:		183141
Approved by:	portmgr (bdrewery)

 

17:04 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 2)

 

16:27 gerald 

Replace USE_GCC=4.6+ and USE_GCC=4.4+ by USE_GCC=yes.

Right now this is a noop in the former case and a noop in the latter
case unless lang/gcc44 has been installed explicitly.

This puts a bit more emphasis on standardizing on a canonical version
"current" GCC and makes it easier to update that canonical version
by changing the default in Mk/bsd.gcc.mk and updating the lang/gcc port.

That is, USE_GCC=yes means "use a decent/modern version of GCC" without
having to worry about details.

Approved by:	portmgr (bdrewery)

 

20:06 makc 

- convert USE_CMAKE to USES
- while here clean up some ports from CMAKE_VERBOSE, which is intended
  for users

Approved by:	portmgr (miwi)

 

16:40 az 

- Fix typos (LICENSE is correct form inside bsd.licenses.mk).
- Removed LICENSE_FILE where is no need in this.

Spotted by:	zont@
Approved by:	portmgr (bapt@)

 

14:29 bsam 

Add freeocl 0.3.6, free Open Computing Language (OpenCL) implementation
for CPU.

PR:		ports/171376
Submitted by:	Oliver Hartmann <ohartman@zedat.fu-berlin.de>