*/*: Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

*/*: Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

*/*: Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

*/*: Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

*/*: Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

*/*: Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

*/*: Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

*/*: Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

fasl ports: Chase 888bfec23a with PORTREVISION bump

These packages must be rebuilt when so much as a bit changes in
lang/sbcl.  Without the rebuild, problems such as StumpWM not loading
will occur.

Sponsored by:	The FreeBSD Foundation

/*: Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

*/*: Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

*/*: Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

*/*: Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

lang/sbcl: Fix patches from 969aedb; bump consumer PORTREVISIONS

Approved by:	krion (maintainer)
Differential Revision:	https://reviews.freebsd.org/D31448

*/*: Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

*/*: Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

*/*: Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Deorbit RESTRICTED && NO_CDROM, part two.

Move ports to the licenses framework.

RESTRICTED → auto-accept (unless expressly stated otherwise)
NO_CDROM → dist-mirror pkg-mirror auto-accept

Differential Revision:  https://reviews.freebsd.org/D30010

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Remove # $FreeBSD$ from Makefiles.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Chase lang/sbcl upgrade with PORTREVISION bump on *-sbcl ports

Chase lang/sbcl upgrade with PORTREVISION bump on *-sbcl ports

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade in 467751

While here, also remove '# Created by: Anonymous' line from
x11/cl-clx-sbcl/Makefile.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade.

Chase upgrade of lang/sbcl

All ports with SBCL fasl files must be rebuilt when the lang/sbcl package
changes.  Also, add a note to lang/sbcl/Makefile as a reminder of the
required PORTREVISION bumps to prevent future breakage.

Approved by:	krion, olgeni
Differential Revision:	https://reviews.freebsd.org/D13087

Bump PORTREVISION on *-sbcl ports after lang/sbcl upgrade

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Remove indefinite articles from COMMENT where I'm maintainer.

Stage support

Update lang/sbcl to 1.1.12 [1] and math/maxima to 5.31.1; adjust
dependent ports

PR:		181545 [1]

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 1)

update lang/sbcl to 1.1.8, and adjust dependent ports

update lang/sbcl to 1.1.7, and adjust dependent ports

update lang/sbcl to 1.1.5+bugfixes, and adjust dependent ports

update lang/sbcl to 1.1.4 and adjust dependent ports

update lang/sbcl to 1.1.3 and adjust dependent ports

update sbcl to 1.1.2 and maxima to 5.29.1; adjust dependent ports

update lang/sbcl to 1.0.58 and switch to the new options format;
adjust dependent ports

update lang/sbcl to 1.0.57, and adjust dependent ports

update to 1.0.56 and adjust dependent ports; switch to the packaged
html documents, to avoid problems with our texinfo tools; pass prefix,
dynamic space size, and lisp bootstrap via make.sh options; update
flags and use them in tests; remove unused patches; simplify and sort
some variables and options-handling; shorten some long lines

update lang/sbcl to 1.0.55, and adjust dependent ports

Unbreak and bump PORTREVISION: rebuild cl-*-sbcl ports that depend
on devel/cl-asdf.

- Mark BROKEN: fails to build

Reported by:    pointyhat

Rename infix.cl to infix.lisp to unbreak the build with lang/sbcl.

Suggested by:   stas

Mark as BROKEN: does not build with current lang/sbcl.

Fix RUN_DEPENDS.

When building ASDF modules with the previous cl-asdf port version,
sometimes the build would fail because of "missing" packages that
weren't actually missing (this only happened in ports that aren't
committed yet).

Rewrite the FASL placement code using the asdf-binary-locations
extension, which is already included in the cl-asdf port but needs
to be installed from ports when building for SBCL (which has its
own ASDF code). The binary-locations code generates paths unsuitable
for PLISTs, therefore it has been overridden with
lisp-specific-fasl-subdir.

Because of the new code, PLIST generation for cl-*-sbcl and cl-*-clisp
ports is now entirely automated.

All dependent cl-* ports are upgraded (obsolete code removed,
PORTREVISION bumped).

Remove unused MASTER_SITES on FASL binary ports, since they only
build sources installed by dependencies.

Remove redundant code and variables from the cl-* ports.

Introduce bsd.cl-asdf.mk to automate the compilation and installation
of Common Lisp libraries using the ASDF framework.

Currently it supports building FASL files on SBCL and CLISP, to
support the ports that already exist in the ports tree.

This should help bringing in more cl-* ports from the ASDF repository
without excessive code duplication.

Remove dependencies on obsolete cl-asdf-sbcl port.

Cleanup whitespace, disable command echo and reduce diff between
similar code fragments.

Take over a few unmaintained ports.

Reset maintainership: Pedro's dev machine has been stolen :-(

Hoping to see you back soon!

Submitted by:   Pedro F. Giffuni <giffunip (at) asme.org> (maintainer)

This is an implementation of an infix reader macro. It should run in any
valid Common Lisp and has been tested in Allegro CL 4.1, Lucid CL 4.0.1,
MCL 2.0 and CMU CL. It allows the user to type arithmetic expressions in
the traditional way (e.g., 1+2) when writing Lisp programs instead of
using the normal Lisp syntax (e.g., (+ 1 2)).  It is not intended to be a
full replacement for the normal Lisp syntax.

This package is compiled with SBCL.

Written by Mark Kantrowitz, School of Computer Science,
Carnegie Mellon University, March 1993.

WWW: http://www.cliki.net/infix

PR:             ports/93223
Submitted by:   Pedro F Giffuni <giffunip@asme.org>