devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

textproc/libxml2: bump all LIB_DEPENDS consumers

This is a separate commit to facilitate easier cherry-picking for
quarterly.

PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)

devel/autogen: Cosmetic change

textproc/libxml2: bump all dependencies

This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246

cleanup: Remove empty files.

Those were all patches that were emptied, and which removal was
forgotten.

devel/autogen: Cosmetic change

devel/autogen: Use BINARY_ALIAS

Remove # $FreeBSD$ from Makefiles.

Convert REINPLACE_CMD to patch files

Update Guile to version 2.2.5, modern stable version, and fix dependent
ports to build against it.  Most changes are rather minor and mechanical
except for the devel/gdb (obtained via their bugtracker [1], courtesy of
Doug Evans).  One port (science/meep) I had to mark BROKEN after fixing
it proved to be very tedious and actually unreliable.  It is very old,
there are newer versions available so it should be fixed by updating.

One port (devel/libruin) had revealed a bug in the new Guile code (an
auxiliary script, really) that had to be worked-round; reference to the
problematic upstream commit is provided in the patch.

PR:		229613
Exp-run by:	antoine

[1] https://sourceware.org/bugzilla/show_bug.cgi?id=21104#c8

Update to 5.18.16

- Update LICENSE
- Add LICENSE_FILE

Changes:	https://sourceforge.net/p/autogen/mailman/message/36402347/
		https://git.savannah.gnu.org/cgit/autogen.git/tree/NEWS.pre
		https://git.savannah.gnu.org/cgit/autogen.git/log/

Change the way *_DEPENDS are set

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

Bump PORTREVISION due upgrade of devel/boehm-gc to 7.6.6

PR:		228597
Approved by:	portmgr (antoine)

Bump PORTREVISION due upgrade of devel/boehm-gc to 7.6.4

PR:		225560
Submitted by:	Yasuhiro KIMURA <yasu@utahime@org>
Reviewed by:	cpm
Approved by:	portmgr (antoine)

Mark CONFLICTS_INSTALL with games/columns

Update to 5.18.12

- Fix LIB_DEPENDS: remove devel/boehm-gc-threaded
- Sort *_DEPENDS
- Add USES=gnome

Changes:	https://git.savannah.gnu.org/cgit/autogen.git/tree/NEWS.pre

Cosmetic change

- Use CONFIGURE_ENV
- Take maintainership
- Update pkg-descr
- Update WWW

Update to version 5.18.10

PR:		211109
Submitted by:	Tobias Kortkamp

- Fix trailing whitespace in pkg-descrs, categories [a-f]*

Approved by:	portmgr blanket

There is no :gnu master sites.

Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

devel/autogen: Fix stage-qa failure

The autoopts-config script needs bash, so it's been added as a run
dependences and the shebang wsa fixed.  While here, add the GPLv2 LICENSE
and improve the COMMENT.

PR:		203672
Submitted by:	Yuri (rawbw.com)

- Simplify MASTER_SITES
- Strip library

Update autogen to 5.18.4.

Switch to guile2, because autogen is used by anjuta. And some components in
the GNOME stack use guile2 already.

cleanup plist

Finish resetting maintainership

PR:		195059

Nuke some @dirrm from devel

lang/guile:
- Add USES=libtool and bump dependent ports
- Replace Makefile.* patches with USES=pathfix
- Replace config.h.in patch with USE_AUTOTOOLS=autoheader
- Avoid automake by touching Makefile.in

Approved by:	portmgr (implicit, bump unstaged port)

- Switch to USES=libtool, drop .la files

Approved by:	portmgr blanket

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

USES=tar:bzip2

Support stage
Modernize a bit

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 1)

Add some shebangfix to allow building most of the ports tree without
/usr/bin/perl

Submitted by:	John Marino
Obtained from:	DPorts

- Update to 5.12

PR:             ports/158621
Noted by:       Bruce Korb <bkorb_AT_gnu dot org>

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

- Chase guile shared lib bump
- Add an entry to UPDATING

-remove MD5

- Switch SourceForge ports to the new File Release System: categories starting
with D

- Update to 5.9.7

- Chase lang/guile shlib bump

- Chase lang/guile share library version bump (.18 -> .19)
- Bump PORTREVISION

PR:             ports/125435

- Update to 5.9.5

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Chase libguile shared lib version.

- Update to 5.9.4

- Update to 5.9.2

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Update to 5.9.1

- Update to 5.9

Noted by:   Bruce Korb <bruce dot korb_AT_3pardata dot com>

- Update to 5.8.9

- Update to 5.8.8

- Update to 5.8.7

- Update to 5.8.6
- I'll maintain it
- ChangeLog
  - see http://autogen.sourceforge.net/announce.html

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include comms/ converters/ databases/ devel/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Update to 5.8.4

PR:             ports/97663
Submitted by:   Shaun Amott

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

upgrade to 5.8.1

- Add some SHA256 checksums

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

- Update to 5.7.3

PR:             ports/87381
Submitted by:   Ports Fury

- Update to 5.7.2

PR:             ports/84399
Submitted by:   Ports Fury

Update to 5.7

PR:             ports/82672
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- update to 5.6.4

Approved by:    co-mentor (vanilla)

- Update to version 5.6.3

PR:             ports/73073
Submitted by:   KATO Tsuguru <tkato432 AT yahoo dot com>
Approved by:    co-mentor (vanilla)

Now builds on amd64

Approved by:    portmgr (self)

- Fix MASTER_SITES

PR:             ports/67286
Submitted by:   Ports Fury

- Update to version 5.6.2

PR:             ports/67080
Submitted by:   Ports Fury

BROKEN on amd64: Build fails

MASTER_SITE_GNU have the distfile in ${PORTNAME}/rel5.6

PR:             63513
Submitted by:   Jason Harris <jharris@widomaker.com>

- Update to version 5.6.0

PR:             ports/63494
Submitted by:   Ports Fury

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

SIZEify.

- Update to version 5.5.7

PR:             60928
Submitted by:   Ports Fury

USE_REINPLACE need be defined only when REINPLACE_CMD is used.

- Update to version 5.5.6

PR:             55999
Submitted by:   Ports Fury

update devel/autogen: 5.5.3 --> 5.5.5

PR:             52861
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Chase guile's shared lib version.

Update to 5.5.3.

PR:             ports/51362
Submitted by:   Ports Fury

De-pkg-comment.

upgrade to 5.5.2

upgrade to 5.4.7

PR:             44965
Submitted by:   Ports Fury

Upgrade to 5.4.6.

PR:             ports/44107
Submitted by:   Ports Fury

upgrade to 5.4.4

PR:             43696
Submitted by:   Ports Fury

Fix plist and add missing manpages

Fix MAN1

PR:             42239
Submitted by:   tkato@prontomail.com

Update to version 5.4.2

PR: 42034
Submitted by: Ports Fury

fix hang-in-build problem

PR:             40633
Submitted by:   Amar Takhar <verm@drunkmonk.net>

upgrade to 5.3.9

Chase guile shared lib number.

Prompted by:    Mike Harding <mvh@ix.netcom.com>

upgrade to 5.3.8

upgrade to 5.3.7

Update to 5.3.6

PR:             37684
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

add missing man page
fix entry in plist
merge patches in files/

PR:             36890
Submitted by:   Ports Fury

upgrade to 5.3.5

upgrade to 5.3.3

upgrade to 5.2.14    

upgrade to 5.2.13    

upgrade to 5.2.12