Port details |
- py-zodbpickle Python pickling interface for ZODB
- 3.0.1_1 databases =0 3.0.1Version of this port present on the latest quarterly branch.
- Maintainer: sunpoet@FreeBSD.org
- Port Added: 2017-10-12 19:00:27
- Last Update: 2024-03-23 14:31:11
- Commit Hash: 388bfe8
- Also Listed In: python
- License: PSFL ZPL21
- WWW:
- https://github.com/zopefoundation/zodbpickle
- Description:
- zodbpickle presents a uniform pickling interface for ZODB:
- Under Python2, this package forks both Python 2.7's pickle and cPickle
modules, adding support for the protocol 3 opcodes. It also provides a new
subclass of bytes, zodbpickle.binary, which Python2 applications can use to
pickle binary values such that they will be unpickled as bytes under Py3k.
- Under Py3k, this package forks the pickle module (and the supporting C
extension) from both Python 3.2 and Python 3.3. The fork add support for the
noload operations used by ZODB.
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}zodbpickle>0:databases/py-zodbpickle@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/databases/py-zodbpickle/ && make install clean
- To add the package, run one of these commands:
- pkg install databases/py-zodbpickle
- pkg install py39-zodbpickle
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py39-zodbpickle listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-zodbpickle
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1684104374
SHA256 (zodbpickle-3.0.1.tar.gz) = 0f0975bdd4a7615320e74af2b0b8be4763c73cf8bf7c4212ab72044289e77498
SIZE (zodbpickle-3.0.1.tar.gz) = 111068
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=0 : devel/py-setuptools@py39
- py39-wheel>=0 : devel/py-wheel@py39
- python3.9 : lang/python39
- py39-build>=0 : devel/py-build@py39
- py39-installer>=0 : devel/py-installer@py39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- python3.9 : lang/python39
- This port is required by:
- for Run
-
- databases/zodb
Configuration Options:
- No options to configure
- Options name:
- databases_py-zodbpickle
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
3.0.1_1 23 Mar 2024 14:31:11 |
Po-Chuan Hsieh (sunpoet) |
databases/py-zodbpickle: Convert to USE_PYTHON=pep517
- Bump PORTREVISION for package change |
3.0.1 27 Jun 2023 19:34:34 |
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
3.0.1 27 May 2023 04:08:23 |
Po-Chuan Hsieh (sunpoet) |
databases/py-zodbpickle: Update to 3.0.1
Changes: https://github.com/zopefoundation/zodbpickle/blob/master/CHANGES.rst |
3.0 09 Apr 2023 13:36:44 |
Po-Chuan Hsieh (sunpoet) |
databases/py-zodbpickle: Update to 3.0
Changes: https://github.com/zopefoundation/zodbpickle/blob/master/CHANGES.rst |
2.6 11 Jan 2023 15:58:34 |
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
2.6 30 Dec 2022 09:04:28 |
Po-Chuan Hsieh (sunpoet) |
databases/py-zodbpickle: Update to 2.6
Changes: https://github.com/zopefoundation/zodbpickle/blob/master/CHANGES.rst |
2.4 03 Oct 2022 02:14:47 |
Po-Chuan Hsieh (sunpoet) |
databases/py-zodbpickle: Update to 2.4
Changes: https://github.com/zopefoundation/zodbpickle/blob/master/CHANGES.rst |
07 Sep 2022 21:58:51 |
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
2.3 07 Sep 2022 21:10:59 |
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above ) |
2.3 20 Jul 2022 14:21:07 |
Tobias C. Berner (tcberner) |
databases: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Choe, Cheng-Dae" whitekid
* "Mahdi Mokhtari <mokhi64@gmail.com>"
* "Meikel Brandmeyer" <ocaml-sqlite3-port@kotka.de>
* <hvo.pm@xs4all.nl>
* <jsmith@resonatingmedia.com>
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alan Snelson <Alan@Wave2.org> (Only the first 15 lines of the commit message are shown above ) |
2.3 16 Jun 2022 13:59:34 |
Po-Chuan Hsieh (sunpoet) |
databases/py-zodbpickle: Update to 2.3
Changes: https://github.com/zopefoundation/zodbpickle/blob/master/CHANGES.rst |
2.2.0 25 Mar 2022 13:36:51 |
Po-Chuan Hsieh (sunpoet) |
databases/py-zodbpickle: Fix build with setuptools 58.0.0+ |
2.2.0 13 Oct 2021 05:36:57 |
Po-Chuan Hsieh (sunpoet) |
databases/py-zodbpickle: Update to 2.2.0
- Strip shared library
Changes: https://github.com/zopefoundation/zodbpickle/blob/master/CHANGES.rst |
2.1.0 27 Sep 2021 15:55:55 |
Po-Chuan Hsieh (sunpoet) |
databases/py-zodbpickle: Update to 2.1.0
Changes: https://github.com/zopefoundation/zodbpickle/blob/master/CHANGES.rst |
2.0.0 06 Apr 2021 14:31:07 |
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
2.0.0 28 Dec 2020 23:02:15 |
antoine |
Drop python 2.7 support from a few ports
With hat: portmgr |
2.0.0 30 Dec 2019 16:57:54 |
sunpoet |
Update to 2.0.0
Changes: https://github.com/zopefoundation/zodbpickle/blob/master/CHANGES.rst |
1.1 13 Nov 2019 23:34:25 |
sunpoet |
Update to 1.1
Changes: https://github.com/zopefoundation/zodbpickle/blob/master/CHANGES.rst |
1.0.4 12 Jun 2019 20:02:15 |
sunpoet |
Update to 1.0.4
Changes: https://github.com/zopefoundation/zodbpickle/blob/master/CHANGES.rst |
1.0.3 01 Jan 2019 20:35:26 |
sunpoet |
Update to 1.0.3
Changes: https://github.com/zopefoundation/zodbpickle/blob/master/CHANGES.rst |
1.0.2 29 Oct 2018 22:12:41 |
sunpoet |
Update to 1.0.2
- Update pkg-descr
- Update WWW
- Take maintainership
Changes: https://github.com/zopefoundation/zodbpickle/blob/master/CHANGES.rst |
0.7.0 02 Oct 2018 19:06:16 |
feld |
Reset maintainer on my python ports |
0.7.0 25 Apr 2018 16:42:38 |
amdmi3 |
Switch all pypi.python.org WWWs to a new PyPi home pypi.org where
they now redirect to anyway. All new urls checked to return 200,
I've fixed a couple of them in the process.
Approved by: portmgr blanket, mat |
0.7.0 12 Oct 2017 19:00:13 |
feld |
Under Python2, this package forks both Python 2.7's pickle and
cPickle modules, adding support for the protocol 3 opcodes. It also
provides a new subclass of bytes, zodbpickle.binary, which Python2
applications can use to pickle binary values such that they will be
unpickled as bytes under Py3k.
Under Py3k, this package forks the pickle module (and the supporting
C extension) from both Python 3.2 and Python 3.3. The fork add support
for the noload operations used by ZODB.
WWW: https://pypi.python.org/pypi/zodbpickle |