| non port: databases/libgdamm/Makefile |
|
SVNWeb
|
Number of commits found: 47 |
|
Thu, 8 Dec 2016
|
[ 19:52 tijl  ]   (Only the first 10 of 551 ports in this commit are shown above.  )
Remove libintl.so.9 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps. Bump dependent ports that have not
been bumped since.
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Thu, 24 Jul 2014
|
[ 18:34 tijl ] (Only the first 10 of 208 ports in this commit are shown above. )
net/openldap24-*:
- Convert to USES=libtool and bump dependent ports
- Avoid USE_AUTOTOOLS
- Don't use PTHREAD_LIBS
- Use MAKE_CMD
databases/glom:
- Drop :keepla
- Add INSTALL_TARGET=install-strip
databases/libgda4* databases/libgda5*:
- Convert to USES=libtool and bump dependent ports
- USES=tar:xz
- Use INSTALL_TARGET=install-strip
- Use @sample (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 23 Apr 2014
|
[ 13:25 tijl ] (Only the first 10 of 462 ports in this commit are shown above. )
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
(Only the first 15 lines of the commit message are shown above )
|
|
Fri, 7 Mar 2014
|
[ 08:41 kwm ]
Stagify.
switch to USES=gmake libtool pathfix.
use USE_GNOME=glibmm
|
|
Wed, 11 Dec 2013
|
[ 18:08 bapt ] (Only the first 10 of 103 ports in this commit are shown above. )
In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in databases
|
|
Mon, 18 Nov 2013
|
[ 11:05 bapt ]
Revert removal of libgdamm it is still in used by databases/glom
Rename the package -legacy to fix collision with libgdamm5
|
|
Fri, 20 Sep 2013
|
[ 16:13 bapt ] (Only the first 10 of 927 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
databases)
|
|
Mon, 2 Sep 2013
|
[ 22:11 bapt ]
Add an explicit dependency on pkgconf
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Sat, 20 Nov 2010
|
[ 15:37 kwm ] (Only the first 10 of 609 ports in this commit are shown above. )
Presenting GNOME 2.32.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.32/
This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.
This release features commits by avl, marcus, mezz and myself.
The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:
Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Sat, 28 Nov 2009
|
[ 20:06 marcus ] (Only the first 10 of 823 ports in this commit are shown above. )
Presenting GNOME 2.28.1 for FreeBSD. The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.
On the FreeBSD front, though, a lot went into this release. Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration. Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.
But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.
(Only the first 15 lines of the commit message are shown above )
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
|
Fri, 3 Jul 2009
|
[ 12:52 kwm ]
Update to 3.99.16.
|
|
Thu, 18 Jun 2009
|
[ 23:55 kwm ]
Update to 3.99.15.
Update COMMENT and pkg-descr to mention this library doesn't wrap libgda v3
anymore but libgda v4.
|
|
Fri, 10 Apr 2009
|
[ 05:56 marcus ] (Only the first 10 of 480 ports in this commit are shown above. )
Presenting GNOME 2.26 for FreeBSD. See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider. Almost all of the Gecko consumers
can make use of this provider by setting:
WITH_GECKO=libxul
The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.
|
|
Mon, 2 Feb 2009
|
[ 01:36 araujo ] (Only the first 10 of 159 ports in this commit are shown above. )
- Use GNOME macro instead of ${MASTER_SITE_GNOME}, remove
MASTER_SITE_SUBDIR when possible.
PR: ports/125243
Submitted by: pgollucci
Reworked by: myself
Tested on: pointyhat exp-run (pav)
|
|
Wed, 1 Oct 2008
|
[ 22:56 kwm ]
Update to 3.0.1.
|
|
Fri, 25 Jul 2008
|
[ 14:34 pav ] (Only the first 10 of 213 ports in this commit are shown above. )
- Remove USE_GCC where it can be satisfied with base compiler on following
FreeBSD versions: 5.3 and up, 6.x, 7.x, 8-CURRENT
|
|
Fri, 6 Jun 2008
|
[ 13:17 edwin ] (Only the first 10 of 155 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Mon, 24 Mar 2008
|
[ 04:25 marcus ]
Update to 3.0.0.
Submitted by: kwm
|
|
Mon, 28 May 2007
|
[ 04:39 bland ]
Allow these ports to be built with GCC 4.2.
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Sat, 10 Feb 2007
|
[ 06:05 kris ] (Only the first 10 of 73 ports in this commit are shown above. )
Use libtool15 port instead of included version to avoid objformat a.out botch
|
|
Sat, 14 Oct 2006
|
[ 08:54 marcus ] (Only the first 10 of 893 ports in this commit are shown above. )
Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.
Submitted by: mezz, ahze, pav, and many others
Approved by: portmgr (implicit, kris)
|
|
Wed, 29 Mar 2006
|
[ 07:37 marcus ]
Update to 1.3.7.
Approved by: bland
|
|
Tue, 28 Mar 2006
|
[ 02:20 bland ]
- Plug .la file to plist. [1]
- Remove obsolete USE_REINPLACE.
Reported by: krismail [1]
|
|
Sun, 26 Mar 2006
|
[ 23:26 marcus ]
This port is no longer broken now that libgda2-1.2.x is back.
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Sat, 19 Nov 2005
|
[ 06:02 ade ] (Only the first 10 of 29 ports in this commit are shown above. )
Switch to <target>:: convention for both patch-autotools and run-autotools,
to allow for easier overriding of these targets by port Makefiles, if
they need to.
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Sat, 5 Nov 2005
|
[ 05:37 marcus ]
Update to 1.3.6.
|
|
Fri, 22 Apr 2005
|
[ 05:41 bland ] (Only the first 10 of 12 ports in this commit are shown above. )
Fix build failure triggered by pkgconfig update.
|
|
Thu, 17 Mar 2005
|
[ 13:50 bland ]
Update to 1.3.6
|
|
Sat, 12 Mar 2005
|
[ 10:54 marcus ] (Only the first 10 of 911 ports in this commit are shown above. )
Bump PORTREVISION to chase the glib20 shared lib version change.
|
|
Sun, 7 Nov 2004
|
[ 22:37 marcus ] (Only the first 10 of 631 ports in this commit are shown above. )
Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.
|
|
Fri, 9 Jul 2004
|
[ 17:43 marcus ] (Only the first 10 of 489 ports in this commit are shown above. )
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
|
Mon, 5 Apr 2004
|
[ 03:31 marcus ] (Only the first 10 of 575 ports in this commit are shown above. )
Chase the glib20 update, and bump all affected ports' PORTREVISIONs.
|
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
|
Wed, 4 Feb 2004
|
[ 05:21 marcus ] (Only the first 10 of 1588 ports in this commit are shown above. )
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 2)
|
|
Wed, 5 Nov 2003
|
[ 00:55 bland ]
One more typo fix in libgdamm-2.0.pc
|
|
Tue, 4 Nov 2003
|
[ 05:34 bland ]
Fix libgda dependency in installed .pc file.
|
|
Wed, 1 Oct 2003
|
[ 14:57 bland ]
Add libgdamm 1.3.0, C++ wrapper for libgda2 library.
|
Number of commits found: 47 |
As an Amazon Associate I earn from qualifying purchases.