10:42 olivierd 

Chase update of graphics/poppler (and slaves ports) in revision r430777

 

15:53 rakuco 

Adopt port with kde@ hat.

 

15:58 rakuco 

Reassign makc's ports back to the pool.

See "Maintainer Reset" in
https://www.freebsd.org/portmgr/policies_contributors.html. makc's last commit
was in March 31st (r412218), and his ports have been timing out since at least
July (r418155).

I also emailed him 2 weeks ago and have received no response so far.

 

20:02 olivierd 

Chase update of Poppler after revision r421386

 

08:20 tcberner 

Replace Mk/bsd.kde4.mk by Mk/Uses/kde.mk in preparation for KDE Frameworks and
Plasma5 ports

At the moment KDE ports use bsd.kde4.mk to handle their dependencies. When
working on the ports for KDE Frameworks and Plasma5 it seemed to be more
reasonable to create a new kde.mk instead of adding an bsd.kde5.mk.

The kde.mk in this review is a stripped down version of the one we are using in
the KDE Test repositories plasma5 branch [1] to only contain the parts relevant
to the current KDE4 ports in the portstree [2].

Changes to the KDE Ports needed by this:

Replace USE_KDE4 by USE_KDE [3]
Add USES=kde:4 [4]
[1] http://src.mouf.net/area51/view/branches/plasma5/KDE/Mk/Uses/kde.mk
[2] The version in the plasma5 branch also handles frameworks/plasma5 and
    handles MASTER_SITES via a KDE_DIST variable similar to bsd.qt.mk for Qt
    Ports -- I chose to leave this out for now, as the diff is already large
    enough.
[3] I chose USE_KDE instead of USE_KDE4, USE_KDE5, USE_KDEX as the version we
    want is already specified as argument to kde:<arg>
[4] For KDE Frameworks and Plasma5 ports this would be kde:5

PR:             210667
Approved by:    portmgr, mat (mentor), rakuco (mentor)
Reviewed by:    mat, rakuco
Differential Revision:   https://reviews.freebsd.org/D6961

 

20:56 rene 

Remove expired misc/kdehier4 and update all of its consumers to not reference it
any
longer. This is a no-op because KDE4_PREFIX is equal to LOCALBASE

Fix up properties for misc/kde4-l10n/files/bsd.l10n.mk to make svn happy.

PR:		209014 (partial)
Submitted by:	myself
Approved by:	portmgr (bapt)
Differential Revision:	https://reviews.freebsd.org/D6542

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

12:35 rakuco 

Change header installation location for kdelibs4-based ports.

Install x11/kdelibs4's headers into include/kde4 instead of include (which
consequently causes several other ports to have their installation paths
changed too).

The idea behind this is to reduce path conflicts between KDE4 ports and the
upcoming KDE Frameworks 5 ports that will be installed into include/KF5. If
we continue installing the KDE4 headers into include/, we can end up in a
situation like this:

    c++ [...] -I/usr/local/include -I/usr/local/include/KF5 file.cpp

If the KDE4 and KF5 versions of a port have the same headers, the KDE4 port
will unintentionally be picked up first and the build will fail.

Most of this huge patch is just PORTREVISION bumps, pkg-plist changes and a
few patches to FooConfig.cmake files to make them look into the kde4/
subdirectory in include/.

Changes which don't fit into the above are:
- deskutils/kdepimlibs4: Import an upstream patch to remove some double
  semicolons that cause base GCC to fail. They have always been present, but
  since the faulty header was referenced via -isystem /usr/local/include
  this never caused any problems.
- devel/subversion, devel/subversion18: Update patch-configure. The current
  kwallet changes there date back to 2011 (r272490), at a time when the
  build could fail when both KDE3 and KDE4 were installed. Replace those
  bits with a change I've submitted upstream to use the kde4-config program
  to determine where KDE4's headers and libraries are installed instead of
  assuming the headers are always in include/.

Once again, huge thanks to Tobias Berner <tcberner@gmail.com> for being the
first one to notice this problem when working on the KDE Frameworks 5 ports,
coming up with the solution and bugging me until I had time to work on this
and ask for the exp-run :-)

PR:		207906 (exp-run)

 

19:40 kwm 

Update poppler to 0.40.0. [1]

Add patches to py-poppler [2] and rubygem-poppler [3] to fix the build
of these ports with poppler 0.39+.

PR:		206293 [1]
Submitted by:	olivierd@ [1]
Obtained from:	ubuntu [2], rubygem-poppler upstream [3]

 

14:20 rakuco 

Update CMake to 3.4.0.

Release notes: https://cmake.org/cmake/help/v3.4/release/3.4.html

- Bump PORTREVISION in a few ports that do not ship SOVERSIONed libraries
  anymore (see https://cmake.org/gitweb?p=cmake.git;a=commit;h=f799ffb5).
- Switch MASTER_SITES to https.

PR:		204629

 

10:11 makc 

databases/kbibtex:
- Update to 0.6
- Remove obsolete patch

 

16:06 kwm 

Update poppler to 0.34.0. [1]

Chase all users of shlib version change of libpoppler.so.

PR:		201477 [1]
Submitted by:	olivierd@ [1]

 

08:20 tijl 

converters/libiconv:
- Remove const qualifier from iconv(3) to match POSIX:
  http://pubs.opengroup.org/onlinepubs/9699919799/functions/iconv.html
- Patch iconv.h to expose more GNU extensions when LIBICONV_PLUG is
  defined because the base system iconv supports these extensions too.

Add/remove patches to/from ports to call iconv with non-const arguments.

This breaks some ports on FreeBSD 10 because base system iconv.h still has
the const qualifier.  Fix this by letting USES=iconv add a build dependency
on converters/libiconv so ports can use its iconv.h (with LIBICONV_PLUG
defined) instead of the base system iconv.h.

This exposed some ports that link with libiconv when it is available instead
of using libc iconv.  In these cases one of the following changes has been
made:
- patch configure scripts to test for libc iconv first
- add ac_cv_lib_iconv_libiconv=no or similar to CONFIGURE_ARGS to disable
  some configure tests
- converters/wkhtmltopdf: this includes Qt4 so add a patch from devel/qt4
- lang/gcc5-aux: respect CFLAGS and friends during configure such that
  LIBICONV_PLUG is defined in the iconv test, also switch to external
  gettext
- mail/gnarwl: replace patches with CPPFLAGS/LIBS
- multimedia/ffmpeg2theora: remove iconv test from SConstruct and use
  ICONV_LIB in port Makefile instead, also fix a bug in subtitles.c
- net-im/licq: finish conversion to cmake
- net-mgmt/bandwidthd, net-mgmt/icinga, net-mgmt/nagios, net-mgmt/nagios4:
  don't need iconv
- textproc/p5-XML-TinyXML: finish conversion to USES=perl5

Other changes:
- databases/qdbm and slaves: respect CFLAGS and friends, also enable bzip2
  and lzo support
- games/ldmud: respect CFLAGS and friends
- graphics/inventor: replace some patches with MAKE_ARGS/MAKE_ENV to respect
  CFLAGS and friends, also remove FreeBSD/alpha patch and add missing xorg
  dependencies

PR:		199099
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

12:28 kwm 

Update poppler to 0.30.0 [1].

Make sure we use openjpeg1 in poppler, while openjpeg2 support
was added there still bugs in openjpeg2 that need to be fixed.
Add patches to inkscape for API changes in poppler 0.29.0 [2].

PR:		196599 [1]
Submitted by:	olivierd@ [1]
Exp-run by:	antoine@
Obtained from:	upstream [2]

 

12:55 makc 

Bump PORTREVISION after graphics/poppler update to 0.26.3

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

20:37 mandree 

Upgrade OpenEXR and ilmbase to 2.2.0.

GCC 4.2 in FreeBSD 8.X/9.X base is now too old to compile OpenEXR, so
GCC-based systems will upgrade to the default ports compiler (GCC 4.7
currently.)

Add two patches to OpenEXR to permit building it in a live system with
the older OpenEXR version installed. Bug report filed to upstream Github
at https://github.com/openexr/openexr/issues/130

Couple OpenEXR more tightly to ilmbase and require its exact .so
version.

Add UPDATING note, and bump PORTREVISION of all dependent ports.

Proto-STAGE hugin-devel, and mark it IGNORE because hugin is newer.

Approved by:	portmgr (implicit for bumping PORTREVISION on unstaged ports)

 

10:53 makc 

Convert my ports to USES=tar

 

18:28 zeising 

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)

 

14:31 makc 

- Bump PORTREVISION after KDE4_PREFIX change

 

12:17 makc 

Replace KDE4 sharedmime with USES=shared-mime-info. KDE4 sharedmime is
deprecated and will be removed along with switching KDE4_PREFIX to
${LOCALBASE} soon.

 

16:54 kwm 

Update poppler to 0.24.4.

Update comment.
Use new LIB_DEPENDS syntax, use USES=pathfix.
Stagify.

Bump portrevision of all affected ports, and Update poppler* LIB_DEPENDS to
new syntax.

 

13:08 makc 

- Support staging
- Use new LIB_DEPENDS syntax
- Use options helpers
- Convert to USES
- Minor changes/fixes

 

16:13 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
databases)

 

22:35 ak 

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

 

20:06 makc 

- convert USE_CMAKE to USES
- while here clean up some ports from CMAKE_VERBOSE, which is intended
  for users

Approved by:	portmgr (miwi)

 

05:27 mezz 

- Update poppler to 0.22.2.
- Bump the rest ports that depend on the poppler and poppler-qt because of
  shared library version have been changed.
- Add a note in the UPDATING for require to rebuild all ports that depend
  on poppler.

Submitted by:	kwm (poppler* part)

 

16:45 makc 

Update to 0.4.1
Remove stale patches

Feature safe:	yes

 

06:44 miwi 

- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4

Review by:      bapt, David Naylor (kde team)

05:26 dinoex 

- update png to 1.5.10

23:02 makc 

Update to 0.4 for KDE 4
Take maintainership

02:51 tabthorpe 

- Reassign to the heap

07:34 ade 

Sync to new bsd.autotools.mk

22:56 araujo 

- Bump PORTREVISION to chase the update of net/yaz.

09:08 wen 

- Bump PORTREVISION to chase the update of net/yaz

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

14:16 markus 

Update to version 0.2.3

11:46 dinoex 

- update to jpeg-8

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

13:57 dinoex 

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

13:17 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

14:13 markus 

Update to version 0.2.1

23:21 markus 

Update to version 0.2

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

00:37 markus 

- Add vendor patches for non-critical bugs
- Bump PORTREVISION

00:50 markus 

Update to version 0.1.5

21:41 edwin 

Remove USE_REINPLACE from all categories starting with D

13:21 markus 

Update to version 0.1.4

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

02:32 markus 

- Update to version 0.1.3
- Add SHA256

14:30 markus 

- Add patch in order to fix a major bug where @string elements won't be saved
- Bump PORTREVISION

05:22 marcus 

Bump PORTREVISION to chase the glib20 shared library update.

14:34 markus 

- Add missing manpage
- Bump PORTREVISION

Submitted by:   pointyhat via kris

22:42 markus 

Update to version 0.1.2

01:01 markus 

- Update to version 0.1.1
- Remove some unneeded directories from pkg-plist

11:54 markus 

Add kbibtex 0.1, a BibTeX editor for KDE.

WWW: http://www.unix-ag.uni-kl.de/~fischer/kbibtex/