11:32 Alexey Dokuchaev (danfe) 

Convert more of my ports to new manual page location (part two).

    9a81a60

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:21 Tobias C. Berner (tcberner) 

databases: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Choe, Cheng-Dae" whitekid
  *  "Mahdi Mokhtari <mokhi64@gmail.com>"
  *  "Meikel Brandmeyer" <ocaml-sqlite3-port@kotka.de>
  *  <hvo.pm@xs4all.nl>
  *  <jsmith@resonatingmedia.com>
  *  <ports@c0decafe.net>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Snelson <Alan@Wave2.org>
  *  Aldis Berjoza <graudeejs@gmail.com>
  *  Alessando Sagratini <ale_sagra@hotmail.com>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexander Logvinov <ports@logvinov,com>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Nedotsukov <bland@FreeBSD.org>
  *  Alexander Novitsky
  *  Alexander Zhuravlev <zaa@zaa.pp.ru>
  *  Alexey Degtyarev <alexey@renatasystems.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Nordby <anders@fix.no>
  *  Andrei Antoukh <niwi@niwi.be>
  *  Andrew McNaughton <andrew@scoop.co.nz>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Kostenko <andrey@kostenko.name>
  *  Andrey Simonenko
  *  Andrey Zakhvatov
  *  Anes Mukhametov <anes@anes.su>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Berezin <tobez@tobez.org>
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Antonio Carlos Venancio Junior (<antonio@php.net>)
  *  Autrijus Tang <autrijus@autrijus.org>
  *  Babak Farrokhi <farrokhi@FreeBSD.org>
  *  Bartek Rutkowski <r@robakdesign.com>
  *  Bernard Spil <brnrd@FreeBSD.org>
  *  Brent J. Nordquist <bjn@visi.com>
  *  Cezary Morga <cm@therek.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Choe, Cheng-Dae
  *  Chris D. Faulhaber <jedgar@FreeBSD.org>
  *  Chris Larsen <darth@vader.dk>
  *  Damian Gerow <dgerow@afflictions.org>
  *  Daniel O'Connor
  *  Daniel Wijnands <daniel@itxl.nl>
  *  Dave Green <dg@fastmail.co.uk>
  *  David Thiel <lx@FreeBSD.org>
  *  Davíð Steinn Geirsson <david@isnic.is>
  *  Denis Generalov <gd.workbox@gmail.com>
  *  Denis Generalov <gd@rambler-co.ru>
  *  Denis Shaposhnikov <dsh@bamus.cz>
  *  Dermot Tynan <dtynan@kalopa.com>
  *  Dmitry Liakh <dliakh@ukr.net>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Dmitry Sivachenko <dima@Chg.RU>
  *  Dmitry Sivachenko <mitya@yandex-team.ru>
  *  Domas Mituzas <midom@dammit.lt>
  *  Dominic Mitchell
  *  Don Owens <don@regexguy.com>
  *  Dryice Dong Liu <dryice@dryice.name>
  *  Edwin Groothuis (edwin@mavetju.org)
  *  Eric Freeman <freebsdports@chillibear.com>
  *  Espen Tagestad <espen@tagestad.no>
  *  Espen Volden aka voldern <voldern@hoeggen.net>
  *  Evan Sarmiento <bsdports@wayfair.com>
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Frank Wall <fw@moov.de>
  *  Ganbold Tsagaankhuu <ganbold@FreeBSD.org>
  *  Gary Palmer <gpalmer@FreeBSD.org>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Geraud CONTINSOUZAS <geraud@gcu.info>
  *  Gerrit Beine <tux@pinguru.net>
  *  Greg Larkin <glarkin@FreeBSD.org>
  *  Grzegorz Blach <gblach@FreeBSD.org>
  *  Hansjoerg Pehofer <hansjoerg.pehofer@uibk.ac.at>
  *  Henk van Oers <hvo.pm@xs4all.nl>
  *  Henrik Hodne <henrik@hodne.io>
  *  Hiroyuki Hanai <hanai@FreeBSD.org>
  *  Horia Racoviceanu <horia@racoviceanu.com>
  *  Hye-Shik Chang
  *  Hye-Shik Chang <perky@python.or.kr>
  *  Ilia Chipitsine <ilia@jane.cgu.chel.su>
  *  Ivan Voras <ivoras@FreeBSD.org>
  *  J.F. Dockes
  *  Jaap Boender <jaapb@kerguelen.org>
  *  Jake Smith <jake@xz.cx>
  *  James FitzGibbon <jfitz@FreeBSD.org>
  *  Janos Mohacsi <janos.mohacsi@bsd.hu>
  *  Janos.Mohacsi@bsd.hu
  *  Jason Helfman <jgh@FreeBSD.org>
  *  Jens Rehsack <rehsack@liwing.de>
  *  Jeremy Chadwick <koitsu@FreeBSD.org>
  *  Jev Björsell <ports@ecadlabs.com>
  *  Jim Ohlstein <jim@ohlste.in>
  *  Jin-Shan Tseng <tjs@cdpa.nsysu.edu.tw>
  *  Joe Horn <joehorn@gmail.com>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Johannes Meixner <johannes@perceivon.net>
  *  John Chen <johnpupu@gmail.com>
  *  John Marino <marino@FreeBSD.org>
  *  John Merryweather Cooper
  *  John Merryweather Cooper et al
  *  Jon Nistor <nistor@snickers.org>
  *  Jonathan Weiss (<jw@innerewut.de>)
  *  Jose Jachuf <jjachuf@gmail.com>
  *  Joshua D. Abraham <jabra@ccs.neu.edu>
  *  Jov <amutu@amutu.com>
  *  Jov amutu@amutu.com
  *  Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
  *  Julien Laffaye <kimelto@gmail.com>
  *  Jyun-Yan You <jyyou@cs.nctu.edu.tw>
  *  Keith Gaughan <k@sterechro.me>
  *  Kevin Bowling <kbowling@freebsd.org>
  *  Kimo <kimor79@yahoo.com>
  *  Kimura Fuyuki <fuyuki@nigredo.org>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Lars Balker Rasmussen <lbr@FreeBSD.org
  *  Lars Balker Rasmussen <lbr@FreeBSD.org>
  *  Lars Eggert <larse@isi.edu>
  *  Lars Thegler <lars@thegler.dk>
  *  Lars Thegler <lth@FreeBSD.org>
  *  Li-Wen Hsu <lwhsu@FreeBSD.org>
  *  Loïc BARTOLETTI
  *  Loïc BARTOLETTI <lbartoletti@FreeBSD.org>
  *  Lubomir Marinov <lubomir_m@abv.bg>
  *  Mahdi Mokhtari <mokhi64@gmail.com>
  *  Mahlon E. Smith <mahlon@martini.nu>
  *  Marc G. Fournier <scrappy@FreeBSD.org>
  *  Mark Felder <feld@FreeBSD.org>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  Martin Matuska <martin@matuska.org>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Mathieu Arnold <m@absolight.net>
  *  Matthew Seaman
  *  Matthias Andree <mandree@FreeBSD.org>
  *  Matthias Fechner <mfechner@FreeBSD.org>
  *  Matthias Petermann <matthias@petermann-it.de>
  *  Max Khon
  *  Max Khon <fjoe@FreeBSD.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Johnson <ahze@ahze.net>
  *  Michael Winking <mwfp@foldl.net>
  *  Mikael URANKAR and Loïc BARTOLETTI
  *  Mike Carlson (carlson39@llnl.gov)
  *  Mikhail T. <michael@fun-box.ru>
  *  Mikhail Teterin
  *  Mikhail Teterin <mi@aldan.algebra.com>
  *  Mikolaj Golub <trociny@FreeBSD.org>
  *  Mirko Zinn <mail@derzinn.de>
  *  Mohammad S. Babaei <info@babaei.net>
  *  Muhammad Moinur Rahman <bofh@FreeBSD.org>
  *  Nick Hibma <n_hibma@freebsd.org>
  *  Nick Hilliard <nick@foobar.org>
  *  Nick Sayer <nsayer@FreeBSD.org>
  *  Nicola Vitale <nivit@FreeBSD.org>
  *  Nicolas Embriz <nbari@tequila.io>
  *  Nicolas de Bari Embriz <nbari@dalmp.com>
  *  Oleg Sharoiko <os@rsu.ru>
  *  Olexander Melnyk <olexander.v.melnyk@gmail.com>
  *  Oliver Eikemeier <eikemeier@fillmore-labs.com>
  *  Olivier Duchateau <duchateau.olivier@gmail.com>
  *  Palle Girgensohn <girgen@FreeBSD.org>
  *  Palle Girgensohn <girgen@partitur.se>
  *  Palle Girgensohn <girgen@pingpong.net>
  *  Parv <parv@pair.org>
  *  Pete Fritchman <petef@databits.net>
  *  Peter Avalos <pavalos@theshell.com>
  *  Philip M. Gollucci
  *  Philip M. Gollucci <philip@p6m7g8.com>
  *  Philip Stoev <philip.stoev@galeracluster.com>
  *  Pierre-Emmanuel Andre <pea@raveland.org>
  *  Pietro Cerutti <gahr@FreeBSD.org>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Qing Feng <qingfeng@douban.com>
  *  Quinton Dolan <q@onthenet.com.au>
  *  Radim Kolar
  *  Rainer Hurling <rhurlin@gwdg.de>
  *  Rick Miller
  *  Robert Kruus <rob.kruus@gmail.com>
  *  Rod Taylor <ports@rbt.ca>
  *  Roland van Laar <roland@micite.net>
  *  Rong-En Fan <rafan@FreeBSD.org>
  *  Roy Boerner
  *  Rozhuk Ivan <rozhuk.im@gmail.com>
  *  Rusty Nejdl
  *  Ryan Steinmetz <rpsfa@rit.edu>
  *  Ryan Steinmetz <zi@FreeBSD.org>
  *  Ryan T. Dean <rtdean@cytherianage.net>
  *  Sam Lawrance <boris@brooknet.com.au>
  *  Scott McWhirter <scott@surreytech.co.uk>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Sean Chittenden <seanc@FreeBSD.org>
  *  Sergei Kolobov <sergei@kolobov.com>
  *  Sergei Vyshenski <svysh.fbsd@gmail.com>
  *  Sergey A. Osokin <osa@FreeBSD.org.ru>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Matveychuk <sem@FreeBSD.org>
  *  Sergey Skvortsov <skv@FreeBSD.org>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Sevan Janiyan <venture37@geeklan.co.uk>
  *  Sheldon Hearn <sheldonh@FreeBSD.org>
  *  Stanislav Svirid <count@211.ru>
  *  Stefan Schmidt <stefan.schmidt@stadtbuch.de>
  *  Steve Wills <swills@FreeBSD.org>
  *  Steve Wills <swills@freebsd.org>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net>
  *  T. William Wells <bill@twwells.com>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas (<thierry@pompo.net>)
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Timur I. Bakeyev <bat@cpan.org>
  *  Tom Judge <tj@FreeBSD.org>
  *  Torsten Zuehlsdorff <ports@toco-domains.de>
  *  Torsten Zuhlsdorff <ports@toco-domains.de>
  *  Toshiya Saitoh (<toshiya@saitoh.nu>)
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  Vasil Dimov <vd@FreeBSD.org>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vladimir Timofeev <vovkasm@gmail.com>
  *  Wen Heping
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Wen heping <wenheping@gmail.com>
  *  William Grzybowski <wg@FreeBSD.org>
  *  Xin Li <delphij@FreeBSD.org>
  *  Yarema <yds@CoolRat.org>
  *  Yarema <yds@Necessitu.de>
  *  Yen-Ming Lee <leeym@FreeBSD.org>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yoichi NAKAYAMA <yoichi@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  Zach Thompson <hideo@lastamericanempire.com>
  *  Zach Thompson <lin-chi@lastamericanempire.com>
  *  ache@FreeBSD.org
  *  alfred
  *  alp@sfedu.ru
  *  andrew@scoop.co.nz
  *  andrey@kostenko.name
  *  chinsan
  *  chinsan <chinsan.tw@gmail.com>
  *  clive
  *  clive@FreeBSD.org
  *  clsung@dragon2.net
  *  dcf@aracnet.com
  *  elvstone@gmail.com
  *  erikhb@bgnett.no
  *  erwin@FreeBSD.org
  *  gahr
  *  ijliao
  *  ijlioa
  *  ivoras
  *  johnpupu <johnpupu@gmail.com>
  *  kirk@daycos.com
  *  kuriyama
  *  lbartoletti <lbartoletti@FreeBSD.org>
  *  loïc bartoletti <lbartoletti@FreeBSD.org>
  *  mharo@FreeBSD.org
  *  michael johnson <ahze@ahze.net>
  *  milki <milki@rescomp.berkeley.edy>
  *  mm@FreeBSD.org
  *  nbm
  *  nectar@FreeBSD.org
  *  nork@FreeBSD.org
  *  nork@cityfujisawa.ne.jp
  *  olevole@olevole.ru
  *  proler@gmail.com
  *  sergey@migsoft.com.ua
  *  sobomax
  *  spam@rm-rf.kiev.ua
  *  stas
  *  tobez
  *  tremere@cainites.net
  *  vanilla
  *  vanilla@
  *  wen@FreeBSD.org
  *  wenheping<wenheping@gmail.com>
  *  wolman@cs.washington.edu
  * # Created by Kevin Bowling <kbowling@FreeBSD.org>
  * # Created by Matthias Fechner <mfechner@FreeBSD.org>

With hat:	portmgr

    d076ad9

13:43 Alexey Dokuchaev (danfe) 

databases/gdbm: update GNU dbm to the latest version 1.23.

Reported by:	portscout

    6e29ecd

16:42 Alexey Dokuchaev (danfe) 

databases/gdbm: update GNU dbm to version 1.22.

Reported by:	portscout

    5bf6281

18:22 Alexey Dokuchaev (danfe) 

databases/gdbm: update GNU dbm to version 1.21.

Reported by:	portscout

    f3a7bf2

04:55 Alexey Dokuchaev (danfe) 

databases/gdbm: update GNU dbm to version 1.20.

Reported by:	portscout

    1ee79df

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

08:59 danfe 

- Update GNU dbm to version 1.19
- Enable parallel builds by using GNU make
- Hook the test suite to our framework
- Visually separate the option blocks

 

07:57 danfe 

- Fix the build with -fno-common (clang 11 and gcc 10)
- GC no longer useful patching of ${WRKSRC}/Makefile.in

PR:	248729, 248734

 

08:18 danfe 

Assume maintainership of several GNU tools I've been keeping an eye to
and updating as of recently.

 

21:21 rene 

Returns johans's ports to the pool after safekeeping his commit bit.

 

14:04 sunpoet 

Update devel/readline to 8.0

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://tiswww.case.edu/php/chet/readline/CHANGES
PR:		236156
Exp-run by:	antoine

 

15:38 danfe 

Update `databases/gdbm' to version 1.18.1, an important bugfix release
which restores compatibility with old databases (version 1.8) and some
later versions which were built without mmap(2) support.  Due to shlib
version change, bump port revisions of the consumer ports.

PR:		233059
Exp-run by:	antoine
Approved by:	maintainer (johans, numerous timeouts)

 

18:12 bapt 

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

 

13:46 sunpoet 

Update devel/readline to 7.0 patch 3

- Bump PORTREVISION for shlib change

Changes:	https://cnswww.cns.cwru.edu/php/chet/readline/CHANGES
		https://lists.gnu.org/archive/html/bug-bash/2016-09/msg00107.html
		https://lists.gnu.org/archive/html/bug-readline/2017-01/msg00002.html
Differential Revision:	https://reviews.freebsd.org/D11172
PR:		219947
Exp-run by:	antoine

 

09:58 johans 

Update to gdbm 1.13
Changes: https://lists.gnu.org/archive/html/info-gnu/2017-03/msg00005.html

 

12:53 johans 

Update to gdbm 1.12 (bugfix release)

 

10:28 tijl 

Remove two libtool fixes from Mk/Uses/libtool.mk.  They don't always work
when an older version of a package is installed.  This is the case when an
executable links with installed libraries and with uninstalled libraries
that link with other uninstalled libraries.  For each of the directly
linked libraries the executable will have an rpath (/usr/local/lib for the
installed libraries and a path under WRKDIR for each of the uninstalled
libraries), but not for the indirect libraries.  Both ld(1) and rtld(1)
search the rpath of the executable first before any rpath of libraries, so
the indirectly linked libraries will be found in /usr/local/lib if they are
installed instead of in WRKDIR.

With this commit executables will overlink with uninstalled indirect
libraries again so their location is added to the rpath of the executable.

This partially reverts r358784.

PR:		191611
Approved by:	portmgr (bapt)

 

09:31 johans 

This port does not need gmake
(no functional changes)

 

10:44 tijl 

Add 4 new sed commands to USES=libtool.  The first two apply some of the
changes that Debian made to their libtool.  The first command applies to
libtool versions 1.4 and up.  The second command is somewhat more elaborate
but essentially it uses the sed hold space to move an "elif...fi" block
down.  It applies to 2.x.  Together these reduce overlinking to unpatched
.la files (from ports that don't have USES=libtool yet but also .la files
in the work directory).

The third and fourth command fix relinking.  During staging libtool may
relink libA when it links to another library in the work directory libB.
The reason is that libA created during build phase has its runpath set to
the location of libB in the work directory.  This allows running an
executable that links to libA from within the work directory.  The relink
removes this extra runpath.

When libtool relinks libA it replaces "libB.la" on the linker command line
with "-L${STAGEDIR}${PREFIX}/lib -lB" with the intention to link to libB in
the stage directory but this -L flag isn't necessarily the first so another
libB may be linked instead.  The two sed commands make relink the same as a
normal link.  This means libtool will relink with libraries from the work
directory using a path similar to "../srcB/.libs/libB.so" without -L flags.
This applies to libtool 1.4 and up.  Earlier versions don't seem to relink
libraries.
(This fixes ports like devel/apr1 so they link with freshly built libraries
instead of installed libraries.)

Fix all ports with missing libraries.

Additionally:
archivers/rpm4: USES=patchfix.
databases/gdbm: INSTALL_TARGET=install-strip.
devel/gnome-vfs: remove patch that doesn't change anything.
devel/ois: INSTALL_TARGET=install-strip and use standard USE_AUTOTOOLS.
devel/zziplib: INSTALL_TARGET=install-strip, MAKE_CMD.
multimedia/mjpegtools: remove USE_AUTOTOOLS, use modern compiler on i386
   instead of disabling optimisations.
net/libnetdude: disable static plugins.

PR:		190941
Exp-run:	antoine
Approved by:	portmgr (antoine)

 

07:48 johans 

- Fix package breakage
- While here, modernise OPTIONS
- Bump PORTREVISION for plist change

PR:		ports/191016
Submitted by:	freebsd@nagilum.org

 

09:13 amdmi3 

- Switch to USES=libtool

Approved by:	portmgr blanket

 

19:11 johans 

- Update gdbm to 1.11
- Enable STAGE support
- Strip installed libraries

 

16:13 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
databases)

 

19:30 johans 

- Update GNU dbm to 1.10
- Add NLS support
- Adopt port

Approved by:    gabor (old maintainer)

 

14:26 danfe 

- Mark as make jobs (-jX) unsafe for the time being
- Drop the article from COMMENT line
- Define LICENSE (GPLv3)
- Remove pre-everything target: OPTIONS framework is vocal enough
- Improve and move OPTIONS knobs lower in the Makefile
- Fix bad indentation in post-patch commands as appropriate
- Correct a typo and reformat port description, and point WWW to a more
  up-to-date page version while I'm at it

Approved by:	gabor (maintainer)

 

17:43 bapt 

Convert to new options framework left unconverted ports in databases category

 

13:20 gabor 

- Update to 1.9.1
- Add OPTIONS for dbm/ndbm compatibility

PR:             ports/160250
Submitted by:   sunpoet

07:34 ade 

Sync to new bsd.autotools.mk

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

06:18 rafan 

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)

17:56 miwi 

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

19:56 gabor 

- Remove DESTDIR support from my ports as it is useless now. New implementation
  is coming.

02:42 kris 

Use libtool port instead of included version to avoid objformat a.out botch

13:46 gabor 

Change my e-mail address.

Approved by:    erwin (mentor)

22:01 pav 

- Install files owned by root:wheel instead of bin:bin

PR:             ports/103270
Submitted by:   "Dr. Markus Waldeck" <waldeck@gmx.de>
Approved by:    maintainer timeout (14 days)

08:11 erwin 

- Eliminate a patch
- Respect DESTDIR

PR:             101567
Submitted by:   gabor (maintainer)

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

23:35 edwin 

Remove install-info from Makefile, it's automatically done when INFO is defined

16:17 garga 

- Add SHA256 checksum
- Pass maintainership to submitter

PR:             ports/89842
Submitted by:   Gabor Kovesdan <gabor.kovesdan@t-hosting.hu>

02:05 linimon 

Reset maintainer per his request.  We hope to see him back soon.

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

03:26 obrien 

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

08:04 obrien 

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

00:36 leeym 

- utilize INFO

PR:             71339
Submitted by:   leeym
Approved by:    maintainer

17:43 marcus 

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

05:21 marcus 

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

11:15 knu 

De-pkg-comment.

11:24 leeym 

make readme fix

PR:             48228
Submitted by:   Cyrille Lefevre <cyrille.lefevre@laposte.net>

17:01 yar 

Add an option, WITH_COMPAT, to install the UNIX dbm/ndbm
compatibility files--libgdbm_compat and the header files.

PR:             ports/47363
Approved by:    Cyrille Lefevre <cyrille.lefevre@laposte.net> (MAINTAINER)

08:16 ijliao 

upgrade to 1.8.3

PR:             44222
Submitted by:   Ports Fury
Approved by:    maintainer

23:13 dwcjr 

Update maintainer's email address   Update a few MASTER_SITES    

00:20 lioux 

honor PREFIX    

04:58 lioux 

Update MAINTAINER email: clefevre@redirect.to -> clefevre@citeweb.net    

14:58 roam 

Change maintainer's email address:   clefevre@citeweb.net ->
clefevre@redirect.to    

04:24 steve 

Tweak post-install target and the wording in pkg-descr.    

22:52 asami 

Rename INSTALLS_SHLIBS to INSTALLS_SHLIB.  (There was a typo in the   previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS.  Boo.)    

11:38 sobomax 

Final round of the INSTALLS_SHLIBS=yes conversion. Few remaining ports with  
ldconfig in PLIST need personal consideration.