*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

converters: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alex Keda <admin@lissyara.su>
  *  Alex Semenyaka <alex@rinet.ru>
  *  Alexandr Kovalenko <never@nevermind.kiev.ua>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrey A. Chernov <ache@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Blaz Zupan <blaz@amis.net>
  *  Brent J. Nordquist <bjn@visi.com>
  *  Carlos J. Puga Medina <cpm@fbsd.es>

converters/py-zfec: Update to 1.5.7.2

Changes:	https://github.com/tahoe-lafs/zfec/releases
		https://github.com/tahoe-lafs/zfec/commits/master

converters/py-zfec: Cosmetic change

Remove # $FreeBSD$ from Makefiles.

Drop python 2.7 support from a few ports

With hat:	portmgr

Relax hardcoded paths to fix build with Python 3.8.7

Since r558913 Python 3.8 incorporates BPO-42604 [1] which changed the
shared libs naming scheme.  This means "EXT_SUFFIX" is now derived from
SOABI and yields with Python 3.8 to ".cpython-38.so" instead of ".so".

The affected ports strip the libaries in the "post-install" target via
hardcoded path(s) and the build fails at the end because the new extension
is not expected at this place.

Remedy the issue by adding wildcards to these paths.  This should also
prepare the ports for future Python releases, which will use the new shared
libs naming scheme.

[1] https://bugs.python.org/issue42604

PR:		252057
Reported by:	John Kennedy
Reviewed by:	fluffy, koobs
Approved by:	koobs (python)

Update to 1.5.5

Changes:	https://github.com/tahoe-lafs/zfec/blob/master/NEWS.txt

Update to 1.5.4

Changes:	https://github.com/tahoe-lafs/zfec/blob/master/NEWS.txt

Readd py-zfec 1.5.3

- Fix LICENSE
- Fix RUN_DEPENDS
- Relax USES=python by removing pyutil dependency
- Bump PORTREVISION for dependency change
- Take maintainership

Obtained
from:	https://github.com/tahoe-lafs/zfec/commit/0441f248ffec150c9c27191b0b7a69a7364a5e7c
		https://github.com/tahoe-lafs/zfec/commit/7d159d3b6ebb28417b333b89b11c0d88cc069568
		https://github.com/tahoe-lafs/zfec/commit/819ca0443fc71e33e61226aef9b0b3fd1a93dd41

Remove expired ports:

2020-01-27 accessibility/py-papi: Unmaintained, uses EOLed python27
2020-01-27 archivers/py-czipfile: Unmaintained, uses EOLed python27
2020-01-27 audio/boodler: Unmaintained, uses EOLed python27
2020-01-27 audio/dir2ogg: Unmaintained, uses EOLed python27
2020-01-27 audio/jokosher: Unmaintained, uses EOLed python27
2020-01-27 audio/mpdbrowser: Unmaintained, uses EOLed python27
2020-01-27 audio/nekobee: Unmaintained, uses EOLed python27
2020-01-27 audio/patchage: Unmaintained, uses EOLed python27
2020-01-27 audio/py-ao: Unmaintained, uses EOLed python27
2020-01-27 audio/py-id3: Unmaintained, uses EOLed python27
2020-01-27 audio/py-shout: Unmaintained, uses EOLed python27
2020-01-27 audio/py-speex: Unmaintained, uses EOLed python27
2020-01-27 audio/pytone: Unmaintained, uses EOLed python27

Deprecate a few ports

With hat:	portmgr

Update pkg-descr and WWW

- Update to 1.5.3

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

Switch all pypi.python.org WWWs to a new PyPi home pypi.org where
they now redirect to anyway. All new urls checked to return 200,
I've fixed a couple of them in the process.

Approved by:	portmgr blanket, mat

Unbreak bulk -a

converters/py-zfec: Update to 1.5.2

Changelog:
https://github.com/tahoe-lafs/zfec/blob/master/changelog

Additional port changes:
* Changed to DISTVERSION
* Updated dependencies according to setup.py
* USES=python because it supports all python versions
* Added library stripping
* Improved docs installation
* Replaced pkg-plist with PORTDOCS

Reported by:	portscout
Approved by:	tcberner (mentor, implicit)

Canonicalize PyPi WWWs:
- Switch to https://
- Remove trailing slashes

Approved by:	portmgr blanket

Return kevlo's ports to the pool, he handed in his commit bit.

With hat:	portmgr-secretary

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

Convert ports to use the options helpers in categories [abc]*, and minor fixes.

Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3412?

Cleanup plist

- Convert ports from cad/, chinese/, comms/ and converters/ to new
  USES=python

Approved by:	portmgr (implicit)

Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.

- Remove easy_install dependency
- Convert to PYDISTUTILS_AUTOPLIST
- Bump PORTREVISION to enforce a cleanup for the easy_install references

With hat:	python@
Approved by:	portmgr (implicit)

- Update to 1.4.24
- Support stage [1]

PR:	ports/188603 [1]
Submitted by:	Bartek Rutkowski [1]

Convert converters to MDOCS and MEXAMPLES

- Update WWW:
  - http://cheeseshop.python.org/ -> https://pypi.python.org/
  - http://pypi.python.org/ -> https://pypi.python.org/

With hat:	python
Approved by:	bapt (portmgr)

Add NO_STAGE all over the place in preparation for the staging support (cat:
converters)

Fix wrong doc path

Reported by:    pointyhat
Feature safe:   yes

Oops

Cosmetic change

Initial import of zfec-1.4.22

Zfec is a fast erasure codec which can be used with the command-line,
C, Python, or Haskell.