13:51 Wen Heping (wen) 

converters/py-rencode: Sync with main, restore build with cython

PR:		276744
Reported by:	agh@riseup.net

    a02b73e

19:34 Rene Ladan (rene) 

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

    3d9a815

15:58 Dmitry Marakasov (amdmi3) 

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

    77d6847

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

16:36 Po-Chuan Hsieh (sunpoet) 

converters/py-rencode: Remove unneeded BUILD_DEPENDS

    ac87df0

10:36 Stefan Eßer (se) 

converters/py-rencode: Add CPE information

Approved by:	portmgr (blanket)

    8072bb7

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

23:02 antoine 

Drop python 2.7 support from a few ports

With hat:	portmgr

 

13:46 kai 

Relax hardcoded paths to fix build with Python 3.8.7

Since r558913 Python 3.8 incorporates BPO-42604 [1] which changed the
shared libs naming scheme.  This means "EXT_SUFFIX" is now derived from
SOABI and yields with Python 3.8 to ".cpython-38.so" instead of ".so".

The affected ports strip the libaries in the "post-install" target via
hardcoded path(s) and the build fails at the end because the new extension
is not expected at this place.

Remedy the issue by adding wildcards to these paths.  This should also
prepare the ports for future Python releases, which will use the new shared
libs naming scheme.

[1] https://bugs.python.org/issue42604

PR:		252057
Reported by:	John Kennedy
Reviewed by:	fluffy, koobs
Approved by:	koobs (python)

 

05:51 koobs 

converters/py-rencode: Fails to configure if cython is installed

ports r482774 removed USE_PYTHON=cython, likely due to it (cython) not
being explicitly declared as a dependency in setup.py:*_requires.

However, setup.py conditionally builds with cython if it is installed, but
the 1.0.6 source distribution (sdist) does not contain a .pyx file to build
with.

This leads to a configure/build error when cython is installed:

  ValueError: 'rencode/rencode.pyx' doesn't match any files

Upstream commit 5c928f14567fabc9efb8bbb8ac5e0eef03c61541 [1] via issue
#25 [2] adds the required .pyx file to the sdist, which technically
addresses the "build with cython from the sdist" issue, but does not
fundamentally resolve the higher-level question: why build with cython when
a C source pre-processed by cython has already been produced for, and is
contained in, the source distribution.

A cython build (and the dependency on cython) does not appear to be
necessary, nor intended [3][4], nor recommended [5], even after #25 is
released, for sdist consumers.

The conditional code to build with cython should not be included in
setup.py, at least not as a default case, or without an explicit request
by the user to use cython, as an optional build method, for sdist consumers
(most downstream packagers and setuptools/pip users [6]).

This change removes the conditional check for Cython, leaving the standard
setuptools build_ext (with the packaged .c) file, as the build method.

While I'm here:

 - Canonicalise COMMENT (match seutp.py:description)
 - Add test target with post-patch target to make the tests dir a module
   usable by a setup.py test (via test_suite directive) target.
 - Honour CFLAGS: Remove forced (appended) -O3 arg from setup.py

[1]
https://github.com/aresch/rencode/commit/5c928f14567fabc9efb8bbb8ac5e0eef03c61541
[2] https://github.com/aresch/rencode/pull/25
[3] setup.py: "Error: sdist requires cython module to generate `.c` file."
[4] dev-requirements.txt:Cython
[5]
https://cython.readthedocs.io/en/latest/src/userguide/source_files_and_compilation.html#distributing-cython-modules
[6] https://github.com/aresch/rencode/issues/11

PR:		233561
Reported by:	John Hein <z7dr6ut7gs snkmail com>
Approved by:	koobs (python)

 

19:09 sunpoet 

Update to 1.0.6

- Add LICENSE_FILE

Changes:	https://github.com/aresch/rencode/releases

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

16:04 sunpoet 

Update to 1.0.5

- Update MASTER_SITES
- Strip shared library

Changes:	https://github.com/aresch/rencode/releases

 

13:29 mat 

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

 

04:40 jkim 

Assign maintainership to python@.

Requested by:	koobs

 

17:03 jkim 

The rencode module is similar to bencode from the BitTorrent project.
For complex, heterogeneous data structures with many small elements,
r-encodings take up significantly less space than b-encodings.

This version of rencode is a complete rewrite in Cython to attempt to
increase the performance over the pure Python module written by Petru
Paler, Connelly Barnes et al.  Later, it was forked, enhanced, and
bundled with Deluge.  Now, it is re-packaged and distributed by Xpra.

WWW: https://github.com/aresch/rencode