| non port: converters/pdf2djvu/Makefile |
|
SVNWeb
|
Number of commits found: 114 (showing only 100 on this page) |
|
Sun, 9 Jul 2023
|
[ 22:08 Matthias Andree (mandree)  ]    dafc181
converters/pdf2djvu: update to 0.9.19
and remove the XMP-incompatible-with-Poppler statement
masked behind the XMP option.
Remove all the cherry-picking patches, no longer needed.
|
|
Sun, 14 May 2023
|
[ 05:58 Tobias C. Berner (tcberner) ] edbe24d (Only the first 10 of 73 ports in this commit are shown above.  )
graphics/poppler: bump dependencies
|
|
Thu, 20 Apr 2023
|
[ 04:07 Tobias C. Berner (tcberner) ] 32edee2 (Only the first 10 of 73 ports in this commit are shown above. )
graphics/poppler: bump consumers after update to 23.04
graphics/poppler was updated in 06339c451266f5843e53bd6406c81a89eedd4ab1
|
|
Mon, 9 Jan 2023
|
[ 12:37 Tobias C. Berner (tcberner) ] 6f41724 (Only the first 10 of 71 ports in this commit are shown above. )
graphics/poppler: bump dependencies
Follow-up to 9b78681895a5a5b7225299242098f7f2f27d959c
|
|
Thu, 8 Dec 2022
|
[ 05:45 Tobias C. Berner (tcberner) ] e3d4360 (Only the first 10 of 72 ports in this commit are shown above. )
graphics/poppler: bump dependencies
|
|
Tue, 8 Nov 2022
|
[ 05:07 Tobias C. Berner (tcberner) ] 3a7ab00 (Only the first 10 of 71 ports in this commit are shown above. )
graphics/poppler: bump PORTREVISION of dependencies
- after update to 22.11 in d01d0d73b169
|
|
Sat, 8 Oct 2022
|
[ 14:42 Tobias C. Berner (tcberner) ] c8e8499 (Only the first 10 of 70 ports in this commit are shown above. )
graphics/poppler: bump port revision of poppler consumers
- poppler was updated to 22.10 in df406767857ddfc6d9580d72b1613a7cf8579bbc
|
|
Sun, 11 Sep 2022
|
[ 07:26 Tobias C. Berner (tcberner) ] 541d96e (Only the first 10 of 70 ports in this commit are shown above. )
graphics/poppler: bump port revision of consumers after upgrade to 22.09
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Tue, 9 Aug 2022
|
[ 05:50 Tobias C. Berner (tcberner) ] 016c054 (Only the first 10 of 70 ports in this commit are shown above. )
graphics/poppler: bump dependencies
Bump port revisions of poppler users after
04f1b0c1a895851aed9221282c1a503bc7415a37
|
|
Wed, 6 Jul 2022
|
[ 16:25 Tobias C. Berner (tcberner) ] 7e5fe8f (Only the first 10 of 70 ports in this commit are shown above. )
graphics/poppler: bump PORTREVISION of poppler consumers
|
|
Sun, 5 Jun 2022
|
[ 14:03 Tobias C. Berner (tcberner) ] 7c24f75 (Only the first 10 of 70 ports in this commit are shown above. )
graphics/poppler: bump port revision of consumers after 22.06 upgrade
|
|
Mon, 9 May 2022
|
[ 16:48 Tobias C. Berner (tcberner) ] f22f615 (Only the first 10 of 60 ports in this commit are shown above. )
graphics/poppler: bump portrevision of consumers
|
|
Tue, 26 Apr 2022
|
[ 16:59 Tobias C. Berner (tcberner) ] 7dd73cf (Only the first 10 of 60 ports in this commit are shown above. )
graphics/poppler: bump portrevision of consumers
Bump revisions after 0ee787592d5a due to so-version bump.
PR: 263009
|
[ 16:50 Tobias C. Berner (tcberner) ] 19b44aa
converters/pdf2djvu: prepare for poppler >= 22.02
PR: 263009
|
|
Tue, 29 Mar 2022
|
[ 18:37 Tobias C. Berner (tcberner) ] 6f59b7b (Only the first 10 of 71 ports in this commit are shown above. )
graphics/poppler: bump consumers
Bump consumers of graphics/poppler after
e25859e09380f5930718094423dc8616cbb202b3
|
|
Fri, 21 Jan 2022
|
[ 21:41 Adriaan de Groot (adridg) ] bb2ef4e
converters/pdf2djvu: switch to C++17 for upcoming poppler, -XMP option
This is a "fix-it-before-it-breaks" commit.
The issue is the upcoming updating for graphics/poppler. It *requires*
consumers to be C++17 or later. Previously it was ok with C++11 or
later. However, graphics/exiv2 is incompatible with C++17 in many
ways; there's work on a new release that is compatible, but that's
not out yet and not really applicable to the exiv2 version found
in ports. (As an example of things-that-change, "register" is a
keyword in C, which informs the storage class of a variable; in C++
up to C++17 it was possibly-meaningful but deprecated while in C++17
it is a reserved keyword but not allowed for storage class; any
`register int x` is now a syntax error and patching that up outside
of upstream repos is no fun at all).
Mark XMP option broken because it pulls in (for the option)
graphics/exiv2, while graphics/poppler is always needed.
PR: 260956
|
|
Mon, 13 Dec 2021
|
[ 20:13 Tobias C. Berner (tcberner) ] fd68e9e (Only the first 10 of 68 ports in this commit are shown above. )
graphics/poppler: update to 21.12
Release 21.12.0:
core:
* Add API to add images
* CairoOutputDev: Fix de-duping of Flate images
* Fix crash on broken files when using non-default
ENABLE_ZLIB_UNCOMPRESS. Issue #393
* Minor code improvements
glib:
* Add API for validation of signatures
* Add API to read/save to file descriptor
utils:
* pdftohtml: Reduce sensitivity of duplicate detection. Issue #1117
build system:
* Increase C++ standard to 17
Exp-run by: antoine
PR: 260344
|
|
Mon, 8 Nov 2021
|
[ 15:16 Gleb Popov (arrowd) ] e886c38 (Only the first 10 of 61 ports in this commit are shown above. )
Bump PORTREVISION of graphics/poppler consumers.
PR: 259656
|
|
Tue, 19 Oct 2021
|
[ 08:36 Tobias Kortkamp (tobik) ] ce1af7f (Only the first 10 of 154 ports in this commit are shown above. )
*: apply refactor.remove-consecutive-empty-lines
Submitted by: portedit
|
|
Tue, 12 Oct 2021
|
[ 18:23 Tobias C. Berner (tcberner) ] e140c1e (Only the first 10 of 73 ports in this commit are shown above. )
graphics/poppler: bump consumers after 2dee0997fbc9ee01991f73f0fa55f9b18908a264
|
|
Wed, 6 Oct 2021
|
[ 10:35 Tobias C. Berner (tcberner) ] 5942260
converters/pdf2djvu: prepare for poppler-21.10
Obtained
from: https://github.com/jwilk/pdf2djvu/commit/e528d3ab88c582e8481c9014982263d9c9e992fe
PR: 258836
|
|
Mon, 6 Sep 2021
|
[ 16:31 Tobias C. Berner (tcberner) ] d98b56f (Only the first 10 of 27 ports in this commit are shown above. )
graphics/poppler: update to 21.09
Release 21.09.0:
core:
* Splash: Massive speed improvement on files that use lots of
save/restore (q/Q) operators
* Correct decoding of signature properties Reason & Location when they
are Unicode
* Fix issues with malformed files
* MSVC build fixes
build system:
* Call cmake_minium_required() before project()
* Always append to CMAKE_{C,CXX}_FLAGS_${CMAKE_BUILD_TYPE}
* correctly forward user-provided flags to try_compile()
Exp-run by: antoine
PR: 258206
|
|
Sun, 15 Aug 2021
|
[ 05:42 Tobias C. Berner (tcberner) ] 9a1df6a (Only the first 10 of 68 ports in this commit are shown above. )
graphics/poppler: update to 21.08.0
Release 21.08.0:
core:
* Add API to allow addition and modification of outlines into a PDF
* Use additional samples to test for constant parts of an axial
gradient
* forms: Create fallback fonts for some well known font names
* Support reading the PDF Version from the Catalog
* Fix XRef::copy when there are modified objects
* Take into account that Date string may be in unicode
* JBIG2Stream: Fix regression in "Do not consider a size-0 to be an
error"
* Replace a local bubble sort implementation by std::sort
* Fix issues with malformed files
build system:(Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Jul 2021
|
[ 20:00 Tobias C. Berner (tcberner) ] fac489c (Only the first 10 of 68 ports in this commit are shown above. )
graphics/poppler: update to 21.07.0
Release 21.07.0:
core:
* JBIG2Stream: Do not consider a size-0 to be an error. Issue #535
* PSOutputDev: fix off-by-one error for image masking in L1/L2 output.
Issue #1088
* CairoOutputDev: Fix memory leak on broken files
* Minor code improvements
build system:
* set C standard to 11 without extensions
Exp-run by: antoine
PR: 256981
|
|
Mon, 7 Jun 2021
|
[ 13:26 Tobias C. Berner (tcberner) ] c567676 (Only the first 10 of 74 ports in this commit are shown above. )
graphics/poppler: update to 21.06.0
Release 21.06.0:
core:
* Fix rendering of some extended latin1 characters in annotations.
Issue #1070
* Support some not so well formed documents with password. Issue #1083
* Add API to get notified if the xref is reconstructed
* Add somewhat fancier left/right signature visual representation
* Fix crashes in malformed files
* Minor code improvements
qt6:
* Change some functions to return std::unique_ptr
qt5/qt6:(Only the first 15 lines of the commit message are shown above )
|
|
Thu, 6 May 2021
|
[ 04:12 Tobias C. Berner (tcberner) ] cc4315b (Only the first 10 of 70 ports in this commit are shown above. )
graphics/poppler: update to 21.05.0
Release 21.05.0:
core:
* Fix crashes in malformed files
* Export SplashFont* symbols used by Scribus
* Minor code improvements
qt5/qt6:
* Make sure new signatures are always properly oriented
* Allow to pass the border width when signing
glib:
* Enhance find to support multi-line matching
utils:
* pdftoppm: Fix regression when using single scaleTo. Issue #1062
build system:
* Allow to disable building manual tests
PR: 255562
Exp-run by: antoine
|
|
Fri, 16 Apr 2021
|
[ 04:29 Tobias C. Berner (tcberner) ] 2f973a2 (Only the first 10 of 70 ports in this commit are shown above. )
graphics/poppler: update to 21.04.0
Release 21.04.0:
core:
* Hide symbols by default
* TextSelectionDumper: fix word order for RTL text
* Fix rendering of text in some files. Issue #1052
* Implement rendering of Masks of Image subtype. Issue #1058
* Forms: fix unclicking standalone form buttons. Issue #1034
glib:
* Expose more fields from MediaRendition in PopplerMedia
* Use stock glib macro to define boxed type
* Remove incorrecly used volatile from enum type registration code
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 7 Apr 2021
|
[ 08:09 Mathieu Arnold (mat) ] cf118cc (Only the first 10 of 8873 ports in this commit are shown above. )
One more small cleanup, forgotten yesterday.
Reported by: lwhsu
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Mon, 8 Mar 2021
|
[ 19:32 tcberner ]   (Only the first 10 of 68 ports in this commit are shown above. )
graphics/poppler: update to 21.03.0
Release 21.03.0:
core:
* Fix parsing text in some broken pdf files. Issue #1040
* Fix memory issue when using threads. Issue #1050
* TextSelectionDumper: Fix getText() for space after word
* Change signature of OutputDev:tilingPatternFill
* Make PDFDocBuilder return a std::unique_ptr
* Improve well formed check for shading functions
* Fix leak in case of fread failing
* Fix memory leak in broken file in JBIG2Stream::readGenericBitmap
* PSOutputDev: Fix stack overflow in broken files
glib:(Only the first 15 lines of the commit message are shown above )
|
|
Tue, 9 Feb 2021
|
[ 11:10 tcberner ] (Only the first 10 of 74 ports in this commit are shown above. )
graphics/poppler: update to 21.02
Release 21.02.0:
core:
* GfxCal*ColorSpace: introduce Bradford transform for chromatic
adaptation
* Fix memory leak if saving the file fails
* Internal code improvements
* Fix various issues handling broken files
* Make checkedAdd work for long long in MSVC
qt5:
* Properly export NewSignatureData class
* Fix regression in QIODeviceOutStream + MSVC
qt6:
* Properly export NewSignatureData class
* Fix regression in QIODeviceOutStream + MSVC
utils:
* pdftohtml: Fix error() parameter type
PR: 253183
Exp-run by: antoine
|
|
Thu, 7 Jan 2021
|
[ 19:23 tcberner ] (Only the first 10 of 68 ports in this commit are shown above. )
graphics/poppler: update to 21.01.0
Release 21.01.0:
core:
* Faster routines for jpeg decoding
* Fix reading signatures in encrypted files
* Add white point correction when lcms is used
* JBIG2Stream: Fix byte counting
* Fix potential data loss if we try to fetch a non existing Ref after
modifying the document
* Specifically use DeviceGray instead of DefaultGray for softmasks
* Fix various issues handling broken files
utils:
* pdftocairo: Setmode binary for windows
* pdfsig: Add hability to digitally sign files(Only the first 15 lines of the commit message are shown above )
|
|
Fri, 11 Dec 2020
|
[ 20:10 tcberner ] (Only the first 10 of 68 ports in this commit are shown above. )
graphics/poppler: update to 20.12.0
Changelog:
core:
* Draw better circles for circle annotations
* Fix annotation line width if no appearance stream or style are given
* Tweak rendering of highlight annotations
* Fix border rendering of some annotations
* Fix rendering of some files. Issue #976 Issue #567
* PSOutputDev: provide options to set the rasterization color space and
ICC profile
* PSOutputDev: for splashModeCMYK8 and language level >=2 activate
overprint emulation
* PSOutputDev: use the DeviceN8 bitmap for rasterization with
CMYK-output + overprint
* Use the font name without subset tag when querying for a system font
* Splash: Fix wrong x adjustment during clipping
* Splash: Fix blitImage in uncolored tiling patterns(Only the first 15 lines of the commit message are shown above )
|
|
Sat, 5 Dec 2020
|
[ 10:44 tcberner ]
converters/pdf2djvu: prepare for poppler 20.12
PR: 251537
Obtained from: Arch Linux
|
|
Tue, 3 Nov 2020
|
[ 19:48 tcberner ] (Only the first 10 of 73 ports in this commit are shown above. )
graphics/poppler: update to 20.11.0
Release 20.11.0:
core:
* More work on rendering of standalone Annot Widgets. Issue #806
* Fix crashes in embedded file handling on broken files. Issue #967
* Fix uninitialized memory read on broken files
* Save a bit of memory in Dict data
cpp:
* Fix crashes in embedded file handling on broken files. Issue #966
utils:
* pdftohtml: HTML and XML output includes font opacity.
(Only the first 15 lines of the commit message are shown above )
|
|
Sun, 11 Oct 2020
|
[ 10:58 tcberner ] (Only the first 10 of 69 ports in this commit are shown above. )
graphics/poppler: update to 20.10.0
Release 20.10.0:
core:
* Filter out repeated forms
* Implement EmbedStream::reset()
* CairoOutputDev: evict just font faces owned solely by cache.
* Splash: Rename Yd to Ydown, Xu to Xup, etc.
* Splash: fix crash in out-of-memory situation.
* Fix some undefined behaviour situation with forged files
PR: 250052
Exp-run by: antoine
|
|
Thu, 10 Sep 2020
|
[ 18:32 tcberner ] (Only the first 10 of 76 ports in this commit are shown above. )
graphics/poppler: update to 20.09.0
Release 20.09.0:
core:
* Compability fix for Forms
* Fix fetching of Objects failing in some cases
* Fix clearing date in Annot setModified/setDate
* TextSelectionPainter: support glyphless fonts
* Splash: Don't try read past end of image
* avoid abort() on large memory allocation
* Fix memory leak on broken files
* Fix potential invalid memory read
* Small code improvements
qt5:(Only the first 15 lines of the commit message are shown above )
|
|
Fri, 14 Aug 2020
|
[ 04:22 tcberner ] (Only the first 10 of 74 ports in this commit are shown above. )
Bump revisions of poppler consumers after r544863
|
|
Sun, 9 Aug 2020
|
[ 09:59 tcberner ]
converters/pdf2djvu: update to 0.9.17.1 to prepare for poppler >= 20.08.0
- this minor release includes a fix to handles graphic/poppler's changed
versioning scheme
PR: 248530
PR: 248419
Approved by: Samy Mahmoudi <samy.mahmoudi@gmail.com> (maintainer)
|
|
Mon, 6 Jul 2020
|
[ 06:17 tcberner ] (Only the first 10 of 75 ports in this commit are shown above. )
graphics/poppler: update to 0.90
Release 0.90.0:
core:
* Color profile tweaks
* Small signature improvements
* BBoxOutputDev: Fix calculation when type3 fonts are involved
* Fix potential crash when reading Forms
* Fix infinite loop in broken file
glib:
* Fix adding annots in rotated pages
* Add ability to reset forms
* Several fixes to the documentation
qt5:
* Make it clear we require Qt 5.5(Only the first 15 lines of the commit message are shown above )
|
|
Tue, 2 Jun 2020
|
[ 14:47 tcberner ] (Only the first 10 of 76 ports in this commit are shown above. )
graphics/poppler: update to 0.89.0
Release 0.89.0:
core:
* Add support for ResetForm action. Issue #225
* Fix crash in PDFDoc::getSignatureFields when there's no Forms at all
* Fix exporting to PS of some files with CID fonts
* Use ICC profiles in PS output (if new enough lcms is used)
* Allow almost-singular tiling pattern matrices. Issue #894
* Fix memory leak when failing to load some fonts
* CairoOutputDev: Use stroke opacity when clipping to a stroke path
* CairoOutputDev: Fix tiling patterns when pattern cell is too far.
Issue #190
glib:
* Add poppler_movie_get_aspect
cpp:
* Add the font infos to the text_box object
Exp-run by: antoine
PR: 246848
|
|
Sat, 2 May 2020
|
[ 10:00 tcberner ] (Only the first 10 of 76 ports in this commit are shown above. )
graphics/poppler: update to 0.88.0
Release 0.88.0:
core:
* Support Widget Annotation Buttons not linked to any Form
* SplashOuputDev: Use stroking opacity when clipping to a stroke path
* Handle 1 bit RGB images in ICC colorspace
* Internal code improvements
qt5:
* Add Document::signatures. Returns signatures not attached to any page
* ArthurOutputDev: Fix font hinting
* ArthurOutputDev: Set the opacity when filling with axial gradients
* ArthurOutputDev: Implement the clipToStrokePath method(Only the first 15 lines of the commit message are shown above )
|
|
Thu, 2 Apr 2020
|
[ 04:41 tcberner ] (Only the first 10 of 78 ports in this commit are shown above. )
graphics/poppler: update to 0.87.0
Release 0.87.0:
core:
* Fix crashes due to inconsistent vtables for Clang builds
* Fix leak in broken files
* Internal code improvements
qt5:
* Add option to get form choice for export value
* ArthurOutputDev: Avoid division by zero in updateLineDash. Issue #695
glib:
* Internal code improvements
utils:
* pdftohtml: Fix memory leak in HtmlOutputDev::getLinkDest
PR: 245150
Exp-run by: antoine
|
|
Sat, 21 Mar 2020
|
[ 12:57 tcberner ] (Only the first 10 of 78 ports in this commit are shown above. )
Update poppler to 0.86.1
Release 0.86.1:
core:
* Fix regression in Browse Link handling
* Internal code improvements
Release 0.86.0:
core:
* Fix link content exfiltration attack
* Splash: Implement gouraudTriangleShadedFill for some non parametrized
shadings. Issue #881
* Fix case unsensitive search for Old Hungarian, Warang Citi,
Medefaidrin and Adlam
* Internal code improvements
glib:(Only the first 15 lines of the commit message are shown above )
|
[ 12:51 tcberner ]
converters/pdf2djvu: update to 0.9.17
- Preparation for Poppler upgrade to 0.86.1
PR: 244822
Approved by: Samy Mahmoudi <samy.mahmoudi@gmail.com> (maintainer)
|
|
Sun, 8 Mar 2020
|
[ 21:56 jbeich ] (Only the first 10 of 64 ports in this commit are shown above. )
Drop dependency on devel/openmp
- Drop if devel/llvm* was used as a substitute
Approved by: yuri, rene (earlier version)
Differential Revision: https://reviews.freebsd.org/D23020
|
|
Mon, 3 Feb 2020
|
[ 19:32 tcberner ] (Only the first 10 of 72 ports in this commit are shown above. )
Bump revision of poppler dependencies
- poppler was updated in r525051, bump revisions
|
|
Wed, 22 Jan 2020
|
[ 17:59 tcberner ] (Only the first 10 of 88 ports in this commit are shown above. )
graphics/poppler: update to 0.84.0
Release 0.84.0:
core:
* Fix crash when converting from Unicode to ASCII-7
* Splash::scaleImageYdXu: Protect against crash if srcWidth is too big
* JBIG2Stream: fix potential crash in malformed documents
* JBIG2Stream: fix leak in reset() if called several times
* Internal code improvements
utils:
* pdfimages: Add error message if first page is larger then number of
pages.
* pdfinfo: Improved paper size recognition
* pdfsig: Fix exit code when dumping signatures
* pdftocairo: Error out when even/odd selects 0 pages(Only the first 15 lines of the commit message are shown above )
|
|
Fri, 1 Nov 2019
|
[ 21:51 tcberner ] (Only the first 10 of 92 ports in this commit are shown above. )
graphics/poppler: update to 0.82.0
Release 0.82.0:
core:
* Fix not being able to open some files. Issue #832
* Fix crashes in malformed files
* Fix memory leak on broken files
* Minor performance improvements
* Minor code improvements
glib:
* Add poppler_document_new_from_bytes
* PopplerAttachment: Silence deprecation warnings for ctime/mtime
build system:
* pdf-inspector: Support builddir != srcdir
* Install Cairo* headers if Cairo has been found
Thanks to adridg@ for fixing all the fallout.
Exp-run by: antoine
PR: 241532
Approved by: gnome (kwm, implicit)
|
|
Mon, 28 Oct 2019
|
[ 08:01 kai ]
converters/pdf2djvu: Update to 0.9.13
Remove now obsolete patches that were merged by upstream:
* Build fixes for graphics/poppler >= 0.76.0
* Improvement of build-time logging
While I'm here:
* Add path to LICENSE_FILE
* Fix no-op occurence of DOCS_DESC
Changelog:
https://github.com/jwilk/pdf2djvu/blob/0.9.13/doc/changelog
PR: 239366
Submitted by: Samy Mahmoudi <samy.mahmoudi@gmail.com> (maintainer)
MFH: 2019Q4
|
|
Sun, 29 Sep 2019
|
[ 07:25 tcberner ] (Only the first 10 of 55 ports in this commit are shown above. )
graphics/poppler: update to 0.81.0
Release 0.81.0:
core:
* Splash: Always enable support for CMYK rasterization
* CairoOutputDev: Check scaled dimensions for 0. Issue #737
* BaseCryptStream: Fix potential uninitialized memory read
* SplashBitmap: Fix wrong width condition for splashModeDeviceN8
* Fix crashes in malformed files
PR: 240781
Exp-run by: antoine
Approved by: gnome (kwm, implicit)
|
|
Sat, 21 Sep 2019
|
[ 18:59 jbeich ] (Only the first 10 of 58 ports in this commit are shown above. )
devel/openmp: update to 9.0.0
- Connect tests to the framework to help QA remaining patches
- Force rebuild all consumers after https://reviews.llvm.org/D59783
Changes: http://llvm.org/viewvc/llvm-project/openmp/tags/RELEASE_900/final/?view=log
ABI: https://abi-laboratory.pro/tracker/timeline/llvm_openmp/
|
|
Sun, 1 Sep 2019
|
[ 20:46 tcberner ] (Only the first 10 of 60 ports in this commit are shown above. )
graphics/poppler: update to 0.80.0
Release 0.80.0:
core:
* Annotations: Implement support for setting a different text in the appearance
stream than the real text
* Splash: Optionally use small_vector from boost
* Fix memory leaks on broken files
* Fix abort on broken files
* Small code simplifications
* Remove USE_FIXEDPOINT support. Issue #821
qt5:
* Fix MSVC build
* Add subsitute-font information
* Fix since marker of some functions (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 31 Jul 2019
|
[ 21:14 tcberner ] (Only the first 10 of 55 ports in this commit are shown above. )
graphics/poppler: update to 0.79.0
Release 0.79.0:
core:
* Fix regression on TextSelectionPainter
* Fix parsing of DefaultAppearance
* Fix memory leak in PostScriptFunction
* Fix crashes in fuzzed files
qt5:
* Implemented support for setIcon by changing appearance
* Added option to set the form available to print
* QString::null is deprecated, use QString()
* Replace deprecated qStableSort with std::stable_sort
build system:
* Turn README into README.md and expand it
PR: 239277
Exp-run by: antoine
Approved by: gnome (kwm, implicit)
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Sat, 29 Jun 2019
|
[ 08:55 tcberner ] (Only the first 10 of 56 ports in this commit are shown above. )
graphics/poppler: update to 0.78.0
Release 0.78.0:
core:
* Fix line annotation arrows for usage in dimensioning
* Handle Ink annots without an InkList but with an AP
* Fix typos preventing parsing of Movie start and duration
* Fix crash on malformed files
glib:
* Add poppler_document_create_dests_tree()
* Don't use the deprecated g_type_class_add_private()
* Document the differences between render() and render_for_printing()
* Fix introspection for poppler_document_new_from_data
* Don't create PopplerInputStream with length 0. Issue #414(Only the first 15 lines of the commit message are shown above )
|
|
Sat, 1 Jun 2019
|
[ 06:39 tcberner ] (Only the first 10 of 66 ports in this commit are shown above. )
graphics/poppler: update to 0.77.0
Release 0.77.0:
core:
* Fix crash on signature handling. Issue #766
* Fix small memory leak in SignatureHandler::getCertificateInfo
* Splash: Restrict filling of overlapping boxes. Issue #750
* Fix crash on malformed files
qt5:
* Fix optional content handling with exclusive layers
cpp:
* Make render_page thread-safe
utils:
* pdfsig: Fix small memory leak
* pdftotext: Fix typo in manpage
PR: 238115
Exp-run by: antoine
Approved by: gnome (kwm, implicit)
|
|
Mon, 13 May 2019
|
[ 18:33 tcberner ] (Only the first 10 of 75 ports in this commit are shown above. )
graphics/poppler: update to 0.76.1
From Changelog at https://poppler.freedesktop.org/releases.html :
Release 0.76.1:
core:
* Make the mul tables be calculated at compile time with constexpr.
* splash: Fix compile with SPLASH_CMYK enabled
* Some typo fixing in error messages
qt5:
* Fix regression in annotation handling
build system:
* Fix some typos in build system output and comments(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 8 May 2019
|
[ 16:05 jbeich ] (Only the first 10 of 52 ports in this commit are shown above. )
devel/openmp: phase out
- Expire after the last version without /usr/lib/libomp.so
- Drop SOVERSION for seamless transition (i.e., avoid conditionals)
PR: 236907
Approved by: bapt (maintainer)
Differential Revision: https://reviews.freebsd.org/D19767
|
|
Wed, 27 Mar 2019
|
[ 21:29 tcberner ] (Only the first 10 of 27 ports in this commit are shown above. )
graphics/poppler: update to 0.75
Release 0.75.0:
core:
* Fix rendering of some annotations
* Fix crashes in broken files
* Small internal code improvements
cpp:
* Improve documentation
* tests: Add showing version information to poppler-dump
utils:
* pdfattach: new util
* pdftohtml: add -dataurls parameter
* pdftoppm: add -sep and -forcenum parameters
* pdftohtml: make singleHtml and stout not mutually exclusive
* pdfsig: fix use after free
- bump revisions of dependent ports due to shlib version change
PR: 236791
Exp-run by: antoine
Approved by: kwm (gnome)
|
|
Wed, 20 Mar 2019
|
[ 19:22 jbeich ]
converters/pdf2djvu: install more files
PR: 236665
Submitted by: Samy Mahmoudi (maintainer)
|
|
Sun, 17 Mar 2019
|
[ 13:14 tcberner ] (Only the first 10 of 41 ports in this commit are shown above. )
graphics/exiv2: update to 0.27
Changelog:
http://www.exiv2.org/changelog.html
- All depending ports have been bumped.
- graphics/py-exiv2 has been marked broken; use graphics/gexiv2 for python
bindings
Exp-run by: antoine
PR: 235943
PR: 234830
|
|
Sat, 16 Mar 2019
|
[ 09:25 tcberner ]
converters/pdf2djvu: remove bogus LICENSE_FILE
- the file does not exist.
PR: 235943
|
|
Tue, 12 Mar 2019
|
[ 16:22 meta ]
convers/pdf2djvu: Do not use GH_TUPLE for the default distribution file
Reported by: mat
|
|
Mon, 11 Mar 2019
|
[ 02:32 meta ]
Readd and rework convertes/pdf2djvu
This port was deleted due to no public distfiles. Now upstream distributes
tarballs on GitHub [1].
- Update to 0.9.12
- Add USES=autoreconf:build and a bootstrap file; define the target
pre-configure
- Make the manual within the post-build target
- Add USE_CXXSTD=c++11
- Add options COLOR_QUANTIZATION, NLS, MULTITHREADING, XMP
- Add LICENSE_FILE
- Patch tools/install-manpages for proper echoing (no functional change)
- Remove the port name from COMMENT to follow the guidelines of the handbook
- Strip the executable within the post-install target
- Submitter is the new MAINTAINER
[1] https://github.com/jwilk/pdf2djvu
PR: 236299
Submitted by: Samy Mahmoudi <samy.mahmoudi@gmail.com>
|
|
Sat, 5 May 2018
|
[ 10:49 antoine ] (Only the first 10 of 42 ports in this commit are shown above. )
Deprecate ports broken for more than 6 months
|
|
Fri, 13 Oct 2017
|
[ 15:29 bapt ]
Mark as broken ports with invalid checksum or no public distfiles
|
|
Sun, 10 Sep 2017
|
[ 20:55 gerald ] (Only the first 10 of 1201 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
|
|
Thu, 24 Aug 2017
|
[ 13:45 swills ] (Only the first 10 of 31 ports in this commit are shown above. )
Bump PORTREVISION after recent poppler update
|
|
Sat, 1 Apr 2017
|
[ 15:23 gerald ] (Only the first 10 of 1118 ports in this commit are shown above. )
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
|
|
Sat, 7 Jan 2017
|
[ 10:42 olivierd ] (Only the first 10 of 50 ports in this commit are shown above. )
Chase update of graphics/poppler (and slaves ports) in revision r430777
|
|
Mon, 5 Sep 2016
|
[ 20:02 olivierd ] (Only the first 10 of 50 ports in this commit are shown above. )
Chase update of Poppler after revision r421386
|
|
Fri, 1 Apr 2016
|
[ 13:29 mat ] (Only the first 10 of 1009 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.
With hat: portmgr
Sponsored by: Absolight
|
|
Thu, 21 Jan 2016
|
[ 19:40 kwm ] (Only the first 10 of 61 ports in this commit are shown above. )
Update poppler to 0.40.0. [1]
Add patches to py-poppler [2] and rubygem-poppler [3] to fix the build
of these ports with poppler 0.39+.
PR: 206293 [1]
Submitted by: olivierd@ [1]
Obtained from: ubuntu [2], rubygem-poppler upstream [3]
|
|
Sun, 27 Sep 2015
|
[ 21:38 amdmi3 ]
- Drop 8.x support
Approved by: portmgr blanket
|
|
Sun, 2 Aug 2015
|
[ 16:08 kwm ]
Update pdf2djvu to 0.7.21.
This version builds with poppler 0.34.0.
Update WWW to new homepage.
PR: 201660
Submitted by: myself
Approved by: maintainer timeout (16 days)
|
|
Thu, 14 May 2015
|
[ 10:15 mat ] (Only the first 10 of 1814 ports in this commit are shown above. )
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
|
|
Mon, 11 May 2015
|
[ 18:34 mat ] (Only the first 10 of 285 ports in this commit are shown above. )
Cleanup DIST* variables.
When appropriate:
- Try to use DISTVERSION{SUF,PRE}FIX
- Replace PORTNAME-PORTVERSION by DISTNAME
- Convert MASTER_SITES to use macros
- Other light cleanup
With hat: portmgr
Sponsored by: Absolight
|
|
Tue, 3 Feb 2015
|
[ 12:28 kwm ] (Only the first 10 of 55 ports in this commit are shown above. )
Update poppler to 0.30.0 [1].
Make sure we use openjpeg1 in poppler, while openjpeg2 support
was added there still bugs in openjpeg2 that need to be fixed.
Add patches to inkscape for API changes in poppler 0.29.0 [2].
PR: 196599 [1]
Submitted by: olivierd@ [1]
Exp-run by: antoine@
Obtained from: upstream [2]
|
|
Tue, 25 Nov 2014
|
[ 12:55 makc ] (Only the first 10 of 51 ports in this commit are shown above. )
Bump PORTREVISION after graphics/poppler update to 0.26.3
|
|
Sun, 5 Oct 2014
|
[ 21:30 tijl ] (Only the first 10 of 15 ports in this commit are shown above. )
graphics/djvulibre:
- Add USES=libtool and bump dependent ports
- Remove threading related patches
|
|
Wed, 11 Jun 2014
|
[ 14:50 tijl ] (Only the first 10 of 297 ports in this commit are shown above. )
Support LIBS like LDFLAGS.
- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS. Also remove references to
PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
required additional patches.
Somewhat simplified a linker command line looks like:
${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}
where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us. If possible -L and -l flags need to be(Only the first 15 lines of the commit message are shown above )
|
|
Fri, 27 Dec 2013
|
[ 16:54 kwm ] (Only the first 10 of 56 ports in this commit are shown above. )
Update poppler to 0.24.4.
Update comment.
Use new LIB_DEPENDS syntax, use USES=pathfix.
Stagify.
Bump portrevision of all affected ports, and Update poppler* LIB_DEPENDS to
new syntax.
|
|
Wed, 6 Nov 2013
|
[ 18:04 madpilot ]
- Update to 0.7.17
- Undeprecate
- Add LICENSE
- Convert to new LIB_DEPENDS format
- Convert to USES
- Convert to staging
PR: ports/183133
Submitted by: Me
Approved by: Maintainer timeout
|
|
Fri, 18 Oct 2013
|
[ 07:19 bapt ] (Only the first 10 of 24 ports in this commit are shown above. )
Deprecated some ports broken for more than 6 month
|
|
Fri, 20 Sep 2013
|
[ 16:05 bapt ] (Only the first 10 of 161 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
converters)
|
|
Tue, 23 Apr 2013
|
[ 06:34 bapt ] (Only the first 10 of 21 ports in this commit are shown above. )
Convert all c categories to USE=pkgconfig
|
|
Sun, 24 Mar 2013
|
[ 15:36 bdrewery ]
- Mark BROKEN:
pdf2djvu.cc: In function 'int xmain(int, char* const*)':
pdf2djvu.cc:1335: error: no matching function for call to
'pdf::Renderer::startDoc(XRef*)'
/usr/local/include/poppler/SplashOutputDev.h:311: note: candidates are: void
SplashOutputDev::startDoc(PDFDoc*)
pdf2djvu.cc:1336: error: no matching function for call to
'MutedRenderer::startDoc(XRef*)'
/usr/local/include/poppler/SplashOutputDev.h:311: note: candidates are: void
SplashOutputDev::startDoc(PDFDoc*)
pdf2djvu.cc:1340: error: no matching function for call to
'MutedRenderer::startDoc(XRef*)'
/usr/local/include/poppler/SplashOutputDev.h:311: note: candidates are: void
SplashOutputDev::startDoc(PDFDoc*)
gmake: *** [pdf2djvu.o] Error 1
*** [do-build] Error code 1
- Add explicit pkgconf dependency [1]
- Trim header
PR: ports/177306 [1]
Reported by: John Marino <draco@marino.st> [1]
With hat: portmgr
|
|
Thu, 21 Mar 2013
|
[ 05:27 mezz ] (Only the first 10 of 30 ports in this commit are shown above. )
- Update poppler to 0.22.2.
- Bump the rest ports that depend on the poppler and poppler-qt because of
shared library version have been changed.
- Add a note in the UPDATING for require to rebuild all ports that depend
on poppler.
Submitted by: kwm (poppler* part)
|
|
Thu, 7 Feb 2013
|
[ 15:40 gahr ]
- Get rid of PTHREAD_CFLAGS and PTHREAD_LIBS (category: converters)
Approved by: portmgr
|
|
Wed, 13 Jun 2012
|
[ 04:49 bf ] (Only the first 10 of 32 ports in this commit are shown above. )
update DjVuLibre to 3.5.25.3 and adjust dependent ports: the QT3 GUI that was
formerly in graphics/djvulibre has been removed, and graphics/djvulibre-nox11
has been merged back into graphics/djvulibre
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Mon, 31 Oct 2011
|
[ 09:53 kwm ] (Only the first 10 of 62 ports in this commit are shown above. )
Update poppler to 0.18.0.
The qt3 bindings are removed upstream.
The glib library lost the last gdk-pixbuf code. And rename it from
-gtk to -glib.
Thanks to: pav for a exp-runs
bapt for double checking the libreoffice ports
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Tue, 23 Aug 2011
|
[ 18:36 kwm ] (Only the first 10 of 27 ports in this commit are shown above. )
Chase poppler shlib bumps.
|
|
Thu, 31 Mar 2011
|
[ 08:39 stas ] (Only the first 10 of 13 ports in this commit are shown above. )
- Update graphics/djvulibre* to 3.5.25. [1]
- Update djview4 to version 4.7.
- Bump up portrevisions of all dependent ports.
PR: ports/155742 [1]
Submitted by: Takefu <takefu@airport.fm>
|
|
Sun, 21 Nov 2010
|
[ 08:59 stas ] (Only the first 10 of 11 ports in this commit are shown above. )
- Update graphics/djvulibre to 3.5.23.
- Bump portrevisions of all dependent ports.
PR: ports/152353, ports/152353 (based on)
Submitted by: Takefu <takefu@airport.fm>
|
|
Sat, 20 Nov 2010
|
[ 15:38 kwm ] (Only the first 10 of 20 ports in this commit are shown above. )
Chase poppler update.
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
Number of commits found: 114 (showing only 100 on this page) |
As an Amazon Associate I earn from qualifying purchases.