21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:21 Tobias C. Berner (tcberner) 

comms: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  'Big Bad Bob' Frazier <bobf@mrp3.com>
  *  <mr@freebsd.org>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Dolgov <fox@furry.spb.ru>
  *  Andrey Lykhin <lan31@inbox.ru>
  *  Anton Voronin <anton@urc.ac.ru>
  *  Brandon S. Allbery KF8NH <allbery@ece.cmu.edu>
  *  Brian Dean <bsd@FreeBSD.org>
  *  Bruce Cran <bruce@cran.org.uk>
  *  Carl Makin <carl@stagecraft.cx>
  *  Darren <igla@batterybackups.net>
  *  David
  *  David O'Brien <obrien@cs.ucdavis.edu>
  *  David Thiel <lx@redundancy.redundancy.org>
  *  Denis Shaposhnikov <dsh@vlink.ru>
  *  Devon H. O'Dell <devon.odell@coyotepoint.com>
  *  Diane Bruce <db@db.net>
  *  Douglas K. Rand <rand@meridian-enviro.com>
  *  Edward Tomasz Napierala <trasz@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Felix Palmen <felix@palmen-it.de>
  *  Frank Steinborn <steinex@nognu.de>
  *  Ganael Laplanche <ganael.laplanche@martymac.org>
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Hye-Shik Chang <perky@fallin.lv>
  *  Janos.Mohacsi@bsd.hu
  *  Jean-Baptiste Quenot <jb.quenot@caraldi.com>
  *  Jeffrey Baitis <jeff@baitis.net>
  *  Johan Strom <johan@stromnet.se>
  *  Johan Strom <johna@stromnet.se>
  *  Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
  *  Julian Stacey <jhs@FreeBSD.org>
  *  Kirill Bezzubets <kirill@solaris.ru>
  *  MITA Yoshio <mita@FreeBSD.org>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Masafumi NAKANE <max@FreeBSD.org>
  *  Matt Dawson <matt@mattsnetwork.co.uk>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Reifenberger (mike@Reifenberger.com)
  *  Mike Heffner <mikeh@FreeBSD.org>
  *  Nick Sayer <nsayer@FreeBSD.org>
  *  Nicole Reid <root@cooltrainer.org>
  *  Olivier Cochard-Labbe <olivier@FreeBSD.org>
  *  Patrick Gardella <patrick@FreeBSD.org>
  *  Paul Traina <pst@FreeBSD.org>
  *  Pav Lucistnik <pav@FreeBSD.org>
  *  Rick Elrod <codeblock@eighthbit.net>
  *  Rodrigo Osorio <rodrigo@FreeBSD.org>
  *  Sebastian Yepes <esn@x123.info>
  *  Staffan Ulfberg <staffanu@multivac.fatburen.org>
  *  Stephen Hurd <shurd@FreeBSD.org>
  *  Steve Woodford <scw@netbsd.hut.fi>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Sunry Chen <sunrychen@gmail.com>
  *  Søren Straarup <xride@x12.dk>
  *  Tony Shadwick <tshadwick@oss-solutions.com>
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  Vladimir Grebenschikov
  *  Vladimir Kondratyev <wulf@FreeBSD.org>
  *  db
  *  dirkx@webweaving.org
  *  dom@happygiraffe.net
  *  elbarto@ArcadeBSD.org
  *  hm
  *  jmz
  *  joes@seaport.net
  *  lambert@lambertfam.org
  *  nox@FreeBSD.org
  *  obrien@cs.ucdavis.edu
  *  rkw
  *  shurd
  *  shurd@FreeBSD.org
  *  wlloyd@slap.net
  * //www.tomek.cedro.info)

With hat:	portmgr

    258a9884

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

16:15 0mp 

Set NO_ARCH

Approved by:	portmgr blanket

 

13:06 des 

Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.

Approved by:	portmgr (adamw)

 

08:58 mat 

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

 

13:29 mat 

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

 

13:08 mat 

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

 

10:27 az 

- add stage support

Approved by:	portmgr (blanket infrastructure)

 

16:03 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
comms)

 

06:03 az 

- convert to the new perl5 framework
- trim Makefile header

Approved by:	portmgr (bapt@, blanket)

 

07:21 culot 

- Update to 1.06 [1]
- Remove Module::Pluggable dependency which is in core since 5.8.9 [1]
- Add LICENSE (Artistic 1 & GPL 1)
- Expand the value of BUILD_DEPENDS before assigning it to RUN_DEPENDS

Changes:        http://search.cpan.org/dist/SMS-Send/Changes
PR:             ports/166633 [1]
Feature safe:   yes

16:15 pgollucci 

- Revert ports/165605 as requested by portmgr@

Note: devel/p5-B-Size and devel/p5-Devel-Arena
where intentionally not restored.

PR:             ports/165605
Approved by:    portmgr (bapt)
Feature safe:   yes (I sure hope so)

18:45 pgollucci 

- Remove ports that only work with < perl 5.12 (devel/p5-B-Size,
devel/p5-Devel-Arena)
- Remove conditionals for PERL_LEVEL < 501200
- Remove regression-test targets b/c this will be centralized in Mk/bsd.perl.mk
- Other minor cleanups
  RUN_DEPENDS = ${BUILD_DEPENDS} -> RUN_DEPENDS:= ${BUILD_DEPENDS}

PR:             ports/165605
Submitted by:   pgollucci (myself)
Approved by:    portmgr (linimon)
Exp Run by:     linimon
Tested by:      make index

17:30 leeym 

- fix dependency
- bump PORTREVISION

PR:             121625
Submitted by:   leeym
Approved by:    maintainer

10:17 gabor 

- Update to 0.05
- Add missing dependencies
- Style

PR:             ports/120807
Submitted by:   Felippe de Meirelles Motta <lippemail@gmail.com>
Approved by:    "snowfly" <snowfly@yuntech.edu.tw> (maintainer)

00:53 linimon 

Welcome bsd.perl.mk.  Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.

Work done by:   gabor
Sponsored by:   Google Summer of Code 2007
Hat:            portmgr

08:01 clsung 

- Update to 0.04

PR:             ports/103906
Submitted by:   clsung
Approved by:    maintainer <snowfly_AT_yuntech dot edu dot tw>

17:52 leeym 

- add p5-SMS-Send-0.03

SMS::Send is intended to provide a driver-based single API for sending SMS and
MMS messages. The intent is to provide a single API against which to write the
code to send an SMS message.

At the same time, the intent is to remove the limits of some of the previous
attempts at this sort of API, like "must be free internet-based SMS services".

SMS::Send drivers are installed seperately, and might use the web, email or
physical SMS hardware. It could be a free or paid. The details shouldn't matter.

You should not have to care how it is actually sent, only that it has been sent
(although some drivers may not be able to provide certainty).

Author: Adam Kennedy <cpan@ali.as>
WWW:    http://search.cpan.org/dist/SMS-Send/

PR:             based on 102506
Submitted by:   snowfly@yuntech.edu.tw