14:02 Muhammad Moinur Rahman (bofh) 

comms/lirc: Moved man to share/man

Approved by:    portmgr (blanket)

    4b7bcc9

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:46 Dima Panov (fluffy) 

*/*: bump all consumers after recent boost upgrade

    4cf39de

14:21 Tobias C. Berner (tcberner) 

comms: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  'Big Bad Bob' Frazier <bobf@mrp3.com>
  *  <mr@freebsd.org>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Dolgov <fox@furry.spb.ru>
  *  Andrey Lykhin <lan31@inbox.ru>
  *  Anton Voronin <anton@urc.ac.ru>
  *  Brandon S. Allbery KF8NH <allbery@ece.cmu.edu>
  *  Brian Dean <bsd@FreeBSD.org>
  *  Bruce Cran <bruce@cran.org.uk>
  *  Carl Makin <carl@stagecraft.cx>
  *  Darren <igla@batterybackups.net>
  *  David
  *  David O'Brien <obrien@cs.ucdavis.edu>
  *  David Thiel <lx@redundancy.redundancy.org>
  *  Denis Shaposhnikov <dsh@vlink.ru>
  *  Devon H. O'Dell <devon.odell@coyotepoint.com>
  *  Diane Bruce <db@db.net>
  *  Douglas K. Rand <rand@meridian-enviro.com>
  *  Edward Tomasz Napierala <trasz@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Felix Palmen <felix@palmen-it.de>
  *  Frank Steinborn <steinex@nognu.de>
  *  Ganael Laplanche <ganael.laplanche@martymac.org>
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Hye-Shik Chang <perky@fallin.lv>
  *  Janos.Mohacsi@bsd.hu
  *  Jean-Baptiste Quenot <jb.quenot@caraldi.com>
  *  Jeffrey Baitis <jeff@baitis.net>
  *  Johan Strom <johan@stromnet.se>
  *  Johan Strom <johna@stromnet.se>
  *  Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
  *  Julian Stacey <jhs@FreeBSD.org>
  *  Kirill Bezzubets <kirill@solaris.ru>
  *  MITA Yoshio <mita@FreeBSD.org>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Masafumi NAKANE <max@FreeBSD.org>
  *  Matt Dawson <matt@mattsnetwork.co.uk>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Reifenberger (mike@Reifenberger.com)
  *  Mike Heffner <mikeh@FreeBSD.org>
  *  Nick Sayer <nsayer@FreeBSD.org>
  *  Nicole Reid <root@cooltrainer.org>
  *  Olivier Cochard-Labbe <olivier@FreeBSD.org>
  *  Patrick Gardella <patrick@FreeBSD.org>
  *  Paul Traina <pst@FreeBSD.org>
  *  Pav Lucistnik <pav@FreeBSD.org>
  *  Rick Elrod <codeblock@eighthbit.net>
  *  Rodrigo Osorio <rodrigo@FreeBSD.org>
  *  Sebastian Yepes <esn@x123.info>
  *  Staffan Ulfberg <staffanu@multivac.fatburen.org>
  *  Stephen Hurd <shurd@FreeBSD.org>
  *  Steve Woodford <scw@netbsd.hut.fi>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Sunry Chen <sunrychen@gmail.com>
  *  Søren Straarup <xride@x12.dk>
  *  Tony Shadwick <tshadwick@oss-solutions.com>
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  Vladimir Grebenschikov
  *  Vladimir Kondratyev <wulf@FreeBSD.org>
  *  db
  *  dirkx@webweaving.org
  *  dom@happygiraffe.net
  *  elbarto@ArcadeBSD.org
  *  hm
  *  jmz
  *  joes@seaport.net
  *  lambert@lambertfam.org
  *  nox@FreeBSD.org
  *  obrien@cs.ucdavis.edu
  *  rkw
  *  shurd
  *  shurd@FreeBSD.org
  *  wlloyd@slap.net
  * //www.tomek.cedro.info)

With hat:	portmgr

    258a9884

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

19:59 zeising 

Bump portrevision for devel/evdev-proto

Bump portrevision on everything with a build dependency on
devel/evdev-proto, to chace the update of evdev-proto in r550442.

 

15:03 se 

Fix build with -fno-common

While here add license and regenerate all patches with make makepatch.

 

21:36 zeising 

Add USES=xorg USES=gl, ports categories c

Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories
starting with 'c'.

 

09:09 zeising 

Split out evdev headers from multimedia/v4l_compat

Split out evdev headers (input.h, input-event-codes.h, uinput.h) into their
own port, devel/evdev-proto, and update those to be current with the Linux
4.19 kernel.  This is done in order to be able to update the rest of the
FreeBSD input stack, which is forthcoming.

By splititng out the evdev headers we can update them independent of other
updates in v4l_compat, which makes it easier for the graphics team to keep
track of them and keep them updated as needed.

Update devel/libevdev from 1.4.4 to 1.5.9 instead of trying to make it work
with the updated headers.  This will be further updated.

Update devel/py-evdev from 0.5.0 to 0.8.1 instead of trying to make it work
with the updated evdev headers.

Update consumers to use devel/evdev-proto rather than multimedia/v4l_compat
as needed, and bump portrevisions.

This is the first step in getting the FreeBSD input stack (libevdev,
libinput and so on) updated to newer versions.

Many thanks to all who have helped out with testing, code and exp-runs.
Apologies if I've forgotten to add any names.

PR:		222905, 217248, (based on, in part), 233787 (exp-run)
Submitted by:	Greg V, wulf
Tested by:	tcberner, kde
Exp-run by:	antoine
Approved by:	portmgr (antoine)
Obtained from:	FreeBSDDesktop development repo
		https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/input
		https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/input-ports

 

08:04 riggs 

Bump PORTREVISION to chase update of multimedia/v4l_compat and libv4l

 

14:35 amdmi3 

- Fix plist on non-x86

Reported by:	Michal Meloun <melounmichal@gmail.com>

 

16:45 amdmi3 

- Switch to USES=localbase
- Pet portlint
- Switch to options helpers
- Fix plist for MINIMAL case
- Properly optionize svgalib dependency handling

 

13:29 mat 

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

 

02:52 eadler 

Reset maintainer

 

13:30 mat 

Convert ports to use the options helpers in categories [abc]*, and minor fixes.

Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3412?

 

18:34 mat 

Cleanup DIST* variables.

When appropriate:
- Try to use DISTVERSION{SUF,PRE}FIX
- Replace PORTNAME-PORTVERSION by DISTNAME
- Convert MASTER_SITES to use macros
- Other light cleanup

With hat:	portmgr
Sponsored by:	Absolight

 

11:23 bapt 

Convert to USES=autoreconf

 

16:17 nox 

- libirman is no longer only a static lib so move it from build to lib
  depends.
- Bump PORTREVISION.

Reported by:	Henry Hu <henry.hu.sh@gmail.com> (via private email)

 

09:03 marino 

Add USES=alias to several ports

Alias is a new USES tool that allows DragonFly to masquerade as FreeBSD
by setting CFLAGS+= -D__FreeBSD__.  For some ports, this fixes the build
without the need for additional patches.

Approved by:	portmgr (bapt, blanket)

 

23:08 mandree 

Modernize USE_PYTHON to USES+=python.

Approved by:	portmgr (implicit)

 

13:59 tijl 

comms/lirc:
- Fix missing -lusb [1]
- Convert to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Use @sample

Reported by:	sbruno [1]

 

11:36 pi 

devel/libftdi: USES=libtool, fix build, bump dependencies

comms/linrad
comms/lirc
devel/urjtag
devel/openocd
sysutils/lcdproc
sysutils/flashrom

devel/xc3sprog is already bumped via PR 188055

 

15:03 adamw 

Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.

 

15:36 nox 

Switch my ports to USES=  tar:...

 

17:37 nox 

- Switch to USES= gmake.
- Stagify.

 

15:10 bapt 

In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in comms

 

16:03 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
comms)

 

22:35 ak 

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

 

05:42 ade 

- Update devel/automake to 1.14
- Update devel/gettext to 0.18.3
- Fix known-broken (from exp-runs) ports
- Clean up a lot of cruft in the devel/gettext port itself,
  based on work from tijl@

PR:		178883
Submitted by:	ade
Sponsored by:	Wadsworth 6X

 

22:21 nox 

- Add missing dependency. [1]
- Strip Makefile header.
- Bump PORTREVISION.

PR:		ports/175969 [1]
Submitted by:	pawel [1]

 

23:19 dougb 

Move the rc.d scripts of the form *.sh.in to *.in

Where necessary add $FreeBSD$ to the file

No PORTREVISION bump necessary because this is a no-op

19:49 nox 

Get rid of two more shlib major versions to pet portlint.

19:37 nox 

- Convert these to OPTIONng.
- Omit shlib major versions in LIB_DEPENDS to pet portlint.

16:13 nox 

Add knob (default off) to install comms/uartlirc serial LIRC driver.

16:39 nox 

- Further improvements to the devinput repeat behaviour, now xbmc should
  work a little better.
- Include updated lircd.conf.devinput in example lircd.conf, with one
  missing button added. (KEY_IMAGES)
- Bump PORTREVISION.

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

09:22 nox 

- Update devinput repeat hack to improve af9015 tuner remote behaviour.
- Bump PORTREVISION.

22:26 nox 

- Some doc (pkg-message..) updates after the webcamd update that now
  supports /dev/input/eventX.
- Bump PORTREVISION.

18:12 nox 

- Update to 0.9.0 .
- Add devinput driver (/dev/input/eventX, -H devinput) in preparation
  for upcoming webcamd update that will support it.
- Fix build with clang, and a few bugs it found too.

20:41 nox 

- Add patch to fix MAKE_JOBS_SAFE and mark as such.
- No PORTREVISION bump as the installed bits don't change.

15:55 dhn 

- Chase libftdi update
- Bump PORTREVISION
- Remove MD5 checksum

22:58 nox 

- Add an example lircd.conf that's preconfigured for use with
  webcamd, either with USB DVB tuner remotes supported by the Linux
  drivers by default that webcamd uses, or for remotes supplied with
  MCE USB IR receivers.
- Bump PORTREVISION.

21:44 nox 

- Adjust pkg-message after remote support has been committed to the
  webcamd port.
- Bump PORTREVISION.

22:11 nox 

- Update comms/lirc to 0.9.0p1_4 in order to be able to use the lirc
  support in webcamd svn (for mceusb-based receivers/transmitters and
  USB DVB tuner remotes supported by the Linux code), and enable
  support for a few more USB devices while we're at it tho of those
  only an FTDI-based one was tested:

        http://www.huitsing.nl/irftdi/ [1]

- Fix plist for audio/rhythmbox and multimedia/totem and
  add missing LIRC_{CFLAGS,LIBS} variables to CONFIGURE_ENV for
  multimedia/xine when building them with (optional) lirc support. [2]

- Chase liblirc_client shlib version bump for ports depdending on it
  and bump PORTREVISIONs for ports depending on it by default.

Approved by:    portmgr (miwi) [2]
Thanks to:      Warren Block <wblock@wonkity.com> for testing [1]

07:34 ade 

Sync to new bsd.autotools.mk

00:15 amdmi3 

- Switch SourceForge ports to the new File Release System: categories starting
with B,C

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

17:27 pav 

- Remove conditional checks relevant only on FreeBSD 5.x and older

06:18 rafan 

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)

16:44 miwi 

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

09:23 pav 

- Remove USE_GETOPT_LONG which is a no-op since March 2007

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

05:04 grog 

Add support for DVICO USB remote control.

Submitted by:   grog
Approved by:    Daniel O'Connor (maintainer)

02:42 kris 

Use libtool port instead of included version to avoid objformat a.out botch

02:27 bland 

- Update to 0.8.0
- Hack configure so produced daemon binary is ready to use
  with third party kernel drivers.
- Make libirman support optional.
- Move daemon communication sockets under /var/run/lirc.
- Add startup script.
- Use bzip2.
- Minor cleanups.

Approved by:    maintaner

00:41 grog 

Don't offer irman as an option.  It's required to build the port.

Submitted by:   Daniel O'Connor (maintainer)

17:57 mnag 

- portlint(1)

PR:             95766
Submitted by:   Alexander Botero-Lowry <alex___foxybanana.com>
Approved by:    maintainer timeout (14 days)

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

05:45 kris 

Back out previous commit, the pkg-plist may have been fixed already.

23:22 kris 

BROKEN: Incorrect pkg-plist

04:45 marcus 

Fix INDEX build, and correct broken dependency.

Reported by:    kris' make index script
Approved by:    portmgr hat

02:12 mikeh 

* Daniel O'Connor <doconnor@gsoft.com.au> has agreed to take over
  maintainership as I don't actively use this port anymore.

02:08 mikeh 

* Patch for vga on i386.

PR:     ports/87832

03:41 mikeh 

* Update to 0.7.2.

PR:      ports/86528
Submitted by:   Daniel J. O'Connor <darius@dons.net.au>

03:26 obrien 

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

08:04 obrien 

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

21:36 mikeh 

Set the device directory to /var/lirc and check for libirman in the correct
location.

Submitted by:   Lewis Thompson <purple@lewiz.net>
PR:             ports/75190

01:10 mikeh 

Add capability to build with libirman support.

Suggested and tested by:        dennis@rootxs.nl

17:43 marcus 

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

01:27 mikeh 

Fix plist & unmark broken.

23:21 kris 

BROKEN: Broken pkg-plist

02:14 linimon 

Respect CFLAGS; utilize USE_GETOPT_LONG; utilize USE_LIBTOOL.

PR:             ports/59842
Submitted by:   Ports Fury
Approved by:    maintainer timeout (6 weeks)

05:21 marcus 

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

22:14 edwin 

Add USE_XLIB to the ports Makefile

Noticed by: bento

01:31 edwin 

New port: comms/lirc: Linux Infared Remote Control

        This is a port of the LIRC, Linux Infrared Remote Control,
        package (www.lirc.org). This port installs the daemons and
        tools for interacting with device drivers that support the
        LIRC device interface. The port does not install any FreeBSD
        infrared device drivers yet; the user must obtain these
        from third parties or port the existing Linux drivers.

PR:             ports/46774
Submitted by:   Mike Heffner <mikeh@FreeBSD.org> <mheffner@acm.vt.edu>