11:20 Nuno Teixeira (eduardo) 

*/*: Bump consumers of x11-toolkits/wxgtk32

New version of wxWidgets in tree

    03eac77

09:44 Daniel Engberg (diizzy) 

comms/freedv: Fix build and plist issues

* Add pkgconfig to USES
* Remove codec2 path arguments from CMAKE_ARGS
* Fix plist issue

Approved by:	portmgr (blanket, build fix)

    a716d19

15:17 Christian Weisgerber (naddy) 

audio/opus: bump consumers after update to 1.4

    feb1fa3

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

21:46 Diane Bruce (db) 

comms/freedv: Update to v1.7.0

Unbreaks port

upstream notes:
Bugfixes:

    Resolves issue with waterfall appearing garbled on some systems. (PR #205)
    Resolves issue with Restore Defaults restoring previous settings on exit.
(PR #207)
    Resolves issue with some sound valid sound devices causing PortAudio errors
during startup checks. (PR #192)

Enhancements:

    Removes requirement to restart FreeDV after using Restore Defaults. (PR
#207)
    Hides frequency display on main window unless PSK Reporter reporting is
turned on. (PR #207)
    Scales per-mode squelch settings when in multi-RX mode to reduce unwanted
noise. (PR #186)
    Single-thread mode is now the default when multi-RX is turned on. (PR #175)
    Makes multi-RX mode the default. (PR #175)
    Mic In/Speaker Out volume controls added to Filter window. (PR #208)
    Cleans up UI for filters and makes the dialog non-modal. (PR #208)
    Adds optional support for PulseAudio on Linux systems. (PR #194)

Documentation:

    Resolves issue with PDF image placement. (PR #203)

Build System:

    Uses more portable way of referring to Bash in build scripts. (PR #200)
    User manual now installed along with executable. (PR #187)
    macOS app bundle generated by CMake instead of manually. (PR #184)
    Fail as soon as a step in the build script fails. (PR #183)

PR:		ports/264769
Reported by:	castilloeduardo@outlook.com.ar
Tested by:	castilloeduardo@outlook.com.ar

    1731b07

14:39 Diane Bruce (db) 

comms/freedv: Broken due to Hamlib change

Port is also out of date. Am working on update silence
port building for now.

    2060da5

19:44 Baptiste Daroussin (bapt) 

INSTALLS_ICONS: retire the macro and rework the related dependencies

While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)

    2c672a4

07:52 Yuri Victorovich (yuri) 

x11-toolkits/wxgtk31: Update 3.1.4 -> 3.1.5

Bump 43 ports that either depend on wxgtk31 or potentially depend on it.

Reported by: portscout

    925e342

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

05:55 lbartoletti 

x11-toolkits/wxgtk30: Update to 3.0.5.1

Changelog:
  -
https://raw.githubusercontent.com/wxWidgets/wxWidgets/v3.0.5/docs/changes.txt

PR:	 246218
Approved by:	tcberner (mentor)
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D24808

 

09:31 tobik 

c*: Add missing USES={gnome,php,sdl,xorg}

 

20:46 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

 

12:47 bapt 

wxGTK3.0: switch to gtk3 and webkit2

Discussed with:	portmgr

 

20:25 tcberner 

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

 

01:35 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

 

05:17 yuri 

comms/freedv: Update 1.2.2 -> 1.3.1

Port changes:
* Change MASTER_SITES
* WWW update

PR:		231142
Submitted by:	takefu@airport.fm

 

22:18 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

 

00:22 db 

V1.2.2 July 2017
----------------

1/ Improvements to Hamlib support, error message reporting, serial rate box.

2/ Disabled unused UDP comms/egexp processing to clean up Options dialog.

 

20:55 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

 

15:01 db 

Update to 1.2
Under heavy development see http://freedv.org/tiki-index.php

Fix distinfo (needed TIMESTAMP)
Fix missing dependancy audio/speex

PR:		ports/219349
Submitted by:	takefu@airport.fm

 

15:23 gerald 

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

 

13:29 mat 

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

 

17:48 antoine 

Fix LIB_DEPENDS

MFH:	2016Q1

 

09:25 shurd 

New port: comms/freedv

FreeDV is a Digital Voice mode for HF radio. FreeDV allows any SSB radio
to be used for low bit rate digital voice. Speech is compressed down to
700-1600 bit/s then modulated onto a 1.25 kHz wide signal comprised of
16 QPSK carriers which is sent to the Mic input of a SSB radio. The signal
is received by an SSB radio, then demodulated and decoded by FreeDV. FreeDV
700(B) rivals SSB in it's low SNR performance. At high SNRs FreeDV 1600
sounds like FM, with no annoying analog HF radio noise.

WWW: http://freedv.org/tiki-index.php