notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
All times are UTC
Ukraine
non port: comms/dcf77pi/Makefile
SVNWeb

Number of commits found: 43

Wed, 7 Sep 2022
[ 21:10 Stefan E├čer (se) search for other commits by this committer ]    commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  b7f0544  (Only the first 10 of 27931 ports in this commit are shown above. View all ports for this commit)
Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Tue, 12 Jul 2022
[ 18:18 Rene Ladan (rene) search for other commits by this committer ]    commit hash:db3918c88e75f75cb4b92650af19055b70f80b51  commit hash:db3918c88e75f75cb4b92650af19055b70f80b51  commit hash:db3918c88e75f75cb4b92650af19055b70f80b51  db3918c 
cleanup: remove Created-by lines mentioning myself from my ports.

While here use my FreeBSD address again for all my ports.
Wed, 21 Apr 2021
[ 08:01 Rene Ladan (rene) search for other commits by this committer ]    commit hash:59dc0b5edf5c9694ce2815a047d5e051bf85aab8  commit hash:59dc0b5edf5c9694ce2815a047d5e051bf85aab8  commit hash:59dc0b5edf5c9694ce2815a047d5e051bf85aab8  59dc0b5 
comms/dcf77pi: pet portclippy
Tue, 6 Apr 2021
[ 14:31 Mathieu Arnold (mat) search for other commits by this committer ]    commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  305f148  (Only the first 10 of 29333 ports in this commit are shown above. View all ports for this commit)
Remove # $FreeBSD$ from Makefiles.
Sat, 5 Dec 2020
[ 20:40 rene search for other commits by this committer ] Original commit   Revision:557083
Move ports that I wrote to my personal email address.
Fri, 22 May 2020
[ 19:20 sunpoet search for other commits by this committer ] Original commit   Revision:536219 (Only the first 10 of 67 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION for devel/json-c json-c
Fri, 17 Apr 2020
[ 20:22 rene search for other commits by this committer ] Original commit   Revision:531972
comms/dcf77pi: update to 3.7.1.1, clean up Makefile
Mon, 10 Sep 2018
[ 13:14 mat search for other commits by this committer ] Original commit   Revision:479406 (Only the first 10 of 995 ports in this commit are shown above. View all ports for this commit)
Add DOCS options to ports that should have one.

Also various fixes related to said option.

PR:		230864
Submitted by:	mat
exp-runs by:	antoine
Wed, 5 Sep 2018
[ 22:01 sunpoet search for other commits by this committer ] Original commit   Revision:479045 (Only the first 10 of 68 ports in this commit are shown above. View all ports for this commit)
Update devel/json-c to 0.13.1

- Add my LOCAL to MASTER_SITES
- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://github.com/json-c/json-c/blob/master/ChangeLog
PR:		231007
Exp-run by:	antoine
Sun, 8 Jul 2018
[ 20:47 rene search for other commits by this committer ] Original commit   Revision:474198
comms/dcf77pi: update to version 3.7.0
Sun, 19 Nov 2017
[ 14:04 rene search for other commits by this committer ] Original commit   Revision:454490
comms/dcf77pi: update to 3.6.1

Changelog:	https://github.com/rene0/dcf77pi/releases/tag/3.6.1
MFH:		2017Q4
Tue, 16 May 2017
[ 16:58 rene search for other commits by this committer ] Original commit   Revision:441010
comms/dcf77pi: update to 3.6.0

See CHANGELOG.md for changes

While here, improve pkg-message
Mon, 2 May 2016
[ 20:27 rene search for other commits by this committer ] Original commit   Revision:414480
comms/dcf77pi: update to version 3.5.0
- pin numbers are now 16 bits
- rename some functions to not confuse Doxygen
- make some functions public
Fri, 1 Apr 2016
[ 13:29 mat search for other commits by this committer ] Original commit   Revision:412344 (Only the first 10 of 1009 ports in this commit are shown above. View all ports for this commit)
Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight
Sun, 10 Jan 2016
[ 17:11 rene search for other commits by this committer ] Original commit   Revision:405730
comms/dcf77pi: update to version 3.4.2

This update fixes a bug in the century calculation which could result in
wrongly calculated dates.
MFH:		2016Q1
Sat, 26 Dec 2015
[ 12:13 rene search for other commits by this committer ] Original commit   Revision:404506
comms/dcf77pi: update to version 3.4.1
Sun, 8 Nov 2015
[ 20:20 rene search for other commits by this committer ] Original commit   Revision:401073
comms/dcf77pi: update to 3.4.0

Add option to create Doxygen HTML

Changelog:	https://github.com/rene0/dcf77pi/releases/tag/3.4.0
Wed, 6 May 2015
[ 15:16 mat search for other commits by this committer ] Original commit   Revision:385521 (Only the first 10 of 348 ports in this commit are shown above. View all ports for this commit)
Update ports in the [bcd]* categories to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight
Wed, 24 Dec 2014
[ 23:43 rene search for other commits by this committer ] Original commit   Revision:375497
comms/dcf77pi: update to 3.3.0

Changes:
* improve support for decoding the alarm messages by showing the main German
  regions which are affected. Note that this was an experimental and now
  unused system. With permission from Mr. Wenzelewski from DIN

* Doxygen support, provide a Doxyfile (not supported by the port yet)

* Small fixes to the FidoCADJ schematics

* library:
  - assign date/time fields more independently so that errors are corrected
    faster
  - record the accumulated minute length at the end of each line in the log
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Thu, 18 Sep 2014
[ 11:56 rene search for other commits by this committer ] Original commit   Revision:368444
- Update comms/dcf77pi to version 3.2.0
- Use USE_LDCONFIG

Overall changes:
- Compile with -fpic instead of -fPIC (potentially smaller code size)
- Add a schematics file for the hardware receiver in FidoCadJ format
- Language and typographical updates to README.md
- Several signed/unsigned/size fixes

Library changes:
- Extract generic third-party code for bits 1..14 from decode_alarm.h into a
  new file bits1to14.h
- Convert almost all calculations for decoding the live signal into integer
  operations, drop fields 'a', 'frac', and 'maxone' from struct bitinfo.
- New function setclock_ok() in setclock.h
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Sun, 20 Jul 2014
[ 21:59 rene search for other commits by this committer ] Original commit   Revision:362380
comms/dcf77pi: apply upstream patch to fix display bug when realfreq is reset
Mon, 14 Jul 2014
[ 11:23 rene search for other commits by this committer ] Original commit   Revision:361774
comms/dcf77pi: update to 3.1.0, improve pkg-descr

General:
- add partial support for OSX and Cygwin
- add bitinfo.last0 field which represents the last pulse where the radio signal
was 0
- store radio signal into a new field bitinfo.signal
- more robust handling of radio signal glitches
- improve realfreq by approximately 7% on a non-optimized standard build
- simplify code for handling DST changes and leap seconds
- defer assigning the decoded time until the minute length has been checked
  to match the exact expected value (i.e. 59 unless a leap second occurs)
- code cleanups

README:
 - mention supported platforms

dcf77pi:
- display updates, show last0

readpin:
- overhaul to make more use of libdcf77
- drop -t parameter
Sun, 1 Jun 2014
[ 15:00 rene search for other commits by this committer ] Original commit   Revision:356132
comms/dcf77pi: Update 3.0.0.1

The code to decode the radio signal, date/time, and civil warnings is now
provided in a library libdcf77.so together with the relevant header files.

dcf77pi is now split up into dcf77pi (the live client) and dcf77pi-analyze
(the client to analyze log files). The -f parameter of dcf77pi is dropped.

Apply minor lint(1) fixes.
Sun, 11 May 2014
[ 12:37 rene search for other commits by this committer ] Original commit   Revision:353681
comms/dcf77pi: update to 2.1.0

General:
- the maxzero and maxone parameters are now determined dynamically, remove
  them from config.txt and README.md
- Do not consider time offset jumps if bit 17 and 18 are equal

readpin:
- add a -q parameter to suppress displaying of the raw signal (default off)
- display updates

dcf77pi:
- display updates/fixes, show radio state
  (OK if no receive/transmit/random errors)
Sun, 13 Apr 2014
[ 16:37 rene search for other commits by this committer ] Original commit   Revision:351228
comms/dcf77pi: update to 2.0.3, use the new @sample keyword
- Mention the "backspace" key in README.md
- Reset DST and leap second announcements at the next hour
- Detect sudden jumps to non-DST
- Relax conditions for processing a DST change
Mon, 31 Mar 2014
[ 22:08 rene search for other commits by this committer ] Original commit   Revision:349808
comms/dcf77pi: update to 2.0.2

- Prevent a possible string overflow when reading the configuration file.
- Plug a few memory leaks.
- Refactor a lot of code.

- Replace -l parameter (specify logfile) of dcf77pi by an interactive 'L' key
  which can also be used to change or disable the log file.
- New entry in config.txt, "outlogfile", to specify the the default log file
  (default empty).

- Fix a bug where the hour would be wrongly considered off by one at the
  moment of a DST change.

- Various bug fixes in the GUI code (only affected displaying of the data).

- Handle log files with \n\r line endings used by RISC OS (which runs on the
  Raspberry Pi).
- Slightly improve output when reading from a log file.

- Update README.md
Fri, 28 Feb 2014
[ 15:51 rene search for other commits by this committer ] Original commit   Revision:346532
comms/dcf77pi: No need to check for and install configuration sample in
Makefile with stage support.
Fri, 21 Feb 2014
[ 12:31 rene search for other commits by this committer ] Original commit   Revision:345378
comms/dcf77pi: update to 2.0.1
- support DESTDIR and install-strip, uninstall targets in upstream Makefile
- clean up port Makefile accordingly
- bugfix: do not accept removed 'S' command line option
- bugfix: display 'no minute' at the correct position in GUI mode
- do not leak curses memory at exit
Sun, 16 Feb 2014
[ 12:32 rene search for other commits by this committer ] Original commit   Revision:344554
comms/dcf77pi: update to version 2.0.0

- Provide an ncurses based interface in live mode, no changes when reading
  from a log file
- Drop the -v and -S parameters, they are now part of the GUI

- add ncurses to USES
Fri, 31 Jan 2014
[ 00:34 rene search for other commits by this committer ] Original commit   Revision:341907
comms/dcf77pi: Update to 1.1.3

Changes:
- Add the correct number of minutes when the accumulated minute length is
  more than 60 seconds (happens when e.g. the transmitter is off).
- Disallow DST changes or leap seconds if a 0 is specified for summermonth,
  wintermonth, or leapsecmonths.
- Allow compilation on NetBSD.
Wed, 1 Jan 2014
[ 22:00 rene search for other commits by this committer ] Original commit   Revision:338396
Update to 1.1.2

Changes:
- replace hardcoded realfreq parameter with a dynamically determined value
  and update README.md
- minor updates to time decoder
Sun, 15 Dec 2013
[ 17:41 rene search for other commits by this committer ] Original commit   Revision:336561
Specify which BSD licence applies.

Submitted by:	make check-sanity
[ 14:19 rene search for other commits by this committer ] Original commit   Revision:336539
Update to 1.1.1

Changes:

dcf77pi:
- Calculate century (modulo 400) from year, month, day of week, day of month
- New parameter -S to set the system time
- Improvements to DST handling
- Set error state if day of month is too large, not just when greater than 31

readpin:
- New parameter -t for readpin to adjust nanosleep() delay
- Determine realfreq dynamically, do not use realfreq from config.txt

general:
- Documentation updates
- Code cleanups
Tue, 3 Dec 2013
[ 21:33 rene search for other commits by this committer ] Original commit   Revision:335593
* Update to 1.1.0:
  - New algorithm to receive bits from the radio signal from an idea by
    Udo Klein, with permission [1] (configuration file changed)
  - Use two independent maximum values for 0 and 1 bits (configuration
    file changed)
  - New verbose display output
  - Weaken precondition for processing leap seconds and DST changes to not
    insist on correct values for parity bits and bit 0, 20, 17, 18
  - README.md updated
  - Style and other minor fixes

* Simplify PORTDOCS installation

[1] http://blog.blinkenlight.net/experiments/dcf77/binary-clock/#comment-5916
Mon, 28 Oct 2013
[ 21:26 rene search for other commits by this committer ] Original commit   Revision:331897
- Update to 1.0.5
- Add a note to UPDATING about the changed and renamed configuration file.
Sat, 28 Sep 2013
[ 13:24 rene search for other commits by this committer ] Original commit   Revision:328566
Add staging support.
Fri, 20 Sep 2013
[ 16:03 bapt search for other commits by this committer ] Original commit   Revision:327714 (Only the first 10 of 172 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
comms)
Tue, 10 Sep 2013
[ 16:23 rene search for other commits by this committer ] Original commit   Revision:326916
Update to 1.0.4 :
- better detection for bits in the radio signal
- catch more corner cases in decoding of the time data

The configuration file (hardware.txt) needs to be updated with this update.
Mon, 22 Jul 2013
[ 14:12 rene search for other commits by this committer ] Original commit   Revision:323450
Update to 1.0.3.1

This release fixes installation of the configuration file.
Sun, 21 Jul 2013
[ 16:40 rene search for other commits by this committer ] Original commit   Revision:323403
Distfile was rerolled, bump PORTREVISION
[ 14:42 rene search for other commits by this committer ] Original commit   Revision:323396
Update to 1.0.3

No need to ignore on FreeBSD < 9.0, the software will disable GPIO itself.
Mon, 24 Jun 2013
[ 09:09 rene search for other commits by this committer ] Original commit   Revision:321672
Update to 1.0.2
Fri, 21 Jun 2013
[ 22:46 rene search for other commits by this committer ] Original commit   Revision:321506
Yet another DCF77 decoder.  This one is intended for the Raspberry Pi
platform but might work on other devices using GPIO pins too.

The received data can be logged for later playback/analysis.

WWW: https://github.com/rene0/dcf77pi

Number of commits found: 43