| non port: chinese/fcitx/Makefile |
|
SVNWeb
|
Number of commits found: 109 (showing only 100 on this page) |
|
Thu, 2 Mar 2023
|
[ 05:23 Tobias C. Berner (tcberner)  ]    fa81a4f (Only the first 10 of 1168 ports in this commit are shown above.  )
accessibility/at-spi2-core: update to 2.46.0
What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
interface.
What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).
What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments. (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] 25fe59a (Only the first 10 of 124 ports in this commit are shown above. )
chinese: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <intron@intron.ac>
* Bo-Yi Wu <appleboy.tw@gmail.com>
* Chih-Hsin Chang <chihhsin@cs.nctu.edu.tw>
* Ching-Hong Wu <woju@freebsd.ntu.edu.tw>
* David O'Brien (obrien@FreeBSD.org)
* David O'Brien (obrien@cs.ucdavis.edu)
* Eric L. Camachat <eric@camachat.org>
* Foxfair Hu <foxfair@FreeBSD.org>
* G. Adam Stanislav <adam@whizkidtech.net>
* Gasol Wu <gasol.wu@gmail.com>
* Gea-Suan Lin <gslin@gslin.org> (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 29 Jun 2022
|
[ 15:00 Stefan Eßer (se) ] 15c825b
Fix CONFLICTS_INSTALL in categories cad and chinese
Approved by: portmgr (implicit)
|
|
Mon, 2 May 2022
|
[ 04:47 Xin LI (delphij) ] c8cb3ce
chinese/fcitx: update to 4.2.9.8.
PR: ports/263710
Approved by: maintainer (lichray at gmail dot com)
|
|
Sun, 10 Apr 2022
|
[ 19:11 Charlie Li (vishwin) ] d63665f (Only the first 10 of 892 ports in this commit are shown above. )
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
|
|
Sat, 26 Mar 2022
|
[ 08:27 Matthias Fechner (mfechner) ] 247c7db (Only the first 10 of 867 ports in this commit are shown above. )
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
|
|
Sun, 6 Feb 2022
|
[ 18:36 Stefan Eßer (se) ] bdd2d4a (Only the first 10 of 69 ports in this commit are shown above. )
Update CONFLICTS definitions in categories a* to c*
Update the CONFLICTS definitions of ports in the following categories:
- accessibility
- archivers
- audio
- benchmarks
- biology
- cad
- chinese
- comms
- converters
An attempt has been made to use generic conflicts patterns that do not
have to be updated whenever a new version of a conflicting port is
added to the ports system.
There is a misunderstanding that the port being built/installed has to
be omitted from the conflicts pattern. This is not true - the port
being built is implicitly non-conflicting due to logic in bsd.port.mk.
Approved by: portmgr (implicit)
|
|
Mon, 10 Jan 2022
|
[ 15:15 Stefan Eßer (se) ] bcaf25a (Only the first 10 of 491 ports in this commit are shown above. )
Fix CONFLICTS entries of multiple ports
There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.
This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.
Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 10 Oct 2021
|
[ 19:44 Baptiste Daroussin (bapt) ] 2c672a4 (Only the first 10 of 586 ports in this commit are shown above. )
INSTALLS_ICONS: retire the macro and rework the related dependencies
While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Tue, 29 Dec 2020
|
[ 14:58 ygy ]   (Only the first 10 of 48 ports in this commit are shown above. )
Add Fcitx5 IME framework and related ports
The Fcitx5 IME framework is the future version of the legacy Fcitx IME
framework.
Main parts of Fcitx5:
- x11/xcb-imdkit
- textproc/fcitx5
Application supports libraries of Fcitx5:
- textproc/fcitx5-qt
- textproc/fcitx5-gtk
GUI configuration tool of Fcitx5:
- textproc/fcitx5-configtool
IME addons for Fcitx5:
- chinese/fcitx5-rime
- japanese/fcitx5-anthy
textproc/fcitx5 and chinese/fcitx cannot be installed at the same time right
now, due to development environment and runtime conflicts users could possibly
run into.
Submitted by: Ka Ho Ng <khng300@gmail.com>
Approved by: lwhsu
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27667
|
|
Fri, 29 May 2020
|
[ 04:44 delphij ]
chinese/fcitx: update to 4.2.9.7.
Approved by: maintainer
Differential Revision: https://reviews.freebsd.org/D25039
|
|
Mon, 4 Nov 2019
|
[ 21:36 zeising ] (Only the first 10 of 43 ports in this commit are shown above. )
Add USES=xorg USES=gl, ports categories c
Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories
starting with 'c'.
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Sun, 17 Mar 2019
|
[ 07:54 tcberner ]
chinese/fcitx: remove unused/invalid USES=qt:4
Approved by: portmgr (implicit)
|
|
Sat, 16 Mar 2019
|
[ 15:11 tcberner ]
chinece/fcitx: remove QT4 option (Qt4 deprecation)
Approved by: portmgr (implicit)
|
|
Fri, 15 Mar 2019
|
[ 05:19 tobik ]
chinese/fcitx: Remove nop options helper
Options helpers are ineffective when set after bsd.port.options.mk.
DOCS_EXTRA_PATCHES_OFF is not needed. A build without DOCS is
already working via %%PORTDOCS%% in the plist even without
files/nodocs-doc_CMakeLists.txt (which also no longer applies).
Reported by: tobik (in D19553)
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
|
Sun, 2 Dec 2018
|
[ 15:41 rene ] (Only the first 10 of 464 ports in this commit are shown above. )
Mark QT4 ports/functionality for removal on 2019-03-15
While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.
Submitted by: tcberner
Reviewed by: adridg, jhale, rene, tcberner
Approved by: portmgr (implicit, flavor hook)
Differential Revision: https://reviews.freebsd.org/D17741
|
|
Wed, 7 Nov 2018
|
[ 11:48 wen ]
- Update to 4.2.9.6
PR: 231612
Submitted by: ryo@tetera.org
Approved by: maintainer
|
|
Thu, 28 Jun 2018
|
[ 17:39 tcberner ] (Only the first 10 of 1416 ports in this commit are shown above. )
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
|
|
Fri, 22 Sep 2017
|
[ 10:48 mat ] (Only the first 10 of 175 ports in this commit are shown above. )
Remove USES=execinfo.
PR: 220271
Submitted by: mat (review), Yasuhiro KIMURA (PR)
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D11488
|
|
Sun, 25 Jun 2017
|
[ 21:07 tcberner ] (Only the first 10 of 115 ports in this commit are shown above. )
Make ninja opt-out in cmake.mk
Using ninja instead of make (1) can lead to significant speed ups while
building.
Therefore switch from having the ninja generator opt-in to having it opt-out.
Previously cmake-ports that wanted to use ninja could set
CMAKE_NINJA=yes
now, ports that do not work with ninja can set
cmake:<existing args>,noninja
Note, that needing this should be an exception and most often points to a broken
cmake of the port.
The ports using cmake were modified
* removed USES=gmake, if ninja is used
* removed MAKE_ARGS, if ninja is used
* added the cmake-argument noninja if necessary
PR: 219629
PR: 213331
Exp-run by: antoine
Reviewed by: rakuco
Differential Revision: https://reviews.freebsd.org/D10748
|
|
Tue, 27 Dec 2016
|
[ 20:33 pi ]
chinese/fcitx: Enable GTK3 by default, fcitx doesn't work in firefox without it
PR: 212590
Submitted by: Yuri Victorovich <yuri@rawbw.com>
Approved by: lichray@gmail.com (maintainer)
|
|
Mon, 14 Nov 2016
|
[ 16:12 tcberner ] (Only the first 10 of 383 ports in this commit are shown above. )
Importing KDE Frameworks into the ports tree (required for newer KDE Desktop and
Applications)
KDE Frameworks is a collection of libraries and software frameworks by KDE
that serve as technological foundation for KDE Plasma 5 and KDE Applications
distributed under the GNU Lesser General Public License (LGPL) [1].
The work is based on what we have in the KDE testing repo [2].
This is the next big step in updating the KDE Desktop and its Applications
to anything less dusty.
With this change, `USES=kde:5` is now a valid option. Ports that need to depend
on KDE Framework can now set:
USES=kde:5
USE_KDE=<framework1> <framework2> ... <frameworkX> (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 11 Nov 2016
|
[ 11:59 jbeich ] (Only the first 10 of 13 ports in this commit are shown above. )
Track used or drop unused devel/icu dependency
This tries to fix discrepancy between
$ pkg rquery '%o %B' | awk '/libicu/ { print $1 }' | sort -u
$ git grep -lF :devel/icu | sed 's,/Makefile$,,'
PR: 214384
Reported by: tijl, stage-qa, readelf(1)
|
|
Fri, 30 Sep 2016
|
[ 16:03 mat ]
Catch stray dependencies, courtesy of the proxy-deps qa check.
Sponsored by: Absolight
|
|
Sat, 24 Sep 2016
|
[ 11:06 tijl ] (Only the first 10 of 110 ports in this commit are shown above. )
- Update devel/icu to 57.1.
- Clean up the Makefile.
- Follow some upstream recommendations (--with-data-packaging=archive,
--disable-renaming, -DICU_NO_USER_DATA_OVERRIDE).
- Patch makefiles to install static libraries with INSTALL_DATA so they
aren't stripped.
- Patch config/mh-bsd-gcc to sync with config/mh-linux-gcc.
- Fix endianness detection in ICU. The code wanted to use BYTE_ORDER
defined in machine/endian.h, but this isn't visible because ICU is
compiled with _XOPEN_SOURCE. Patch the code to use _BYTE_ORDER instead.
- Compile ICU with C++11 compiler to enable move constructors.
- Patch ICU to fix a problem with atomics in the case of a C++11 compiler
without C++11 header <atomic> (like Clang on FreeBSD 9).
- Bump all ports that depend on it due to library version change.
- Add USES=compiler:c++0x to some ports that pick up -std=c++0x from ICU
pkgconfig files.
- Add USES=compiler:c++11-lib to graphics/libcdr01 because it also needs
a C++11 runtime library now. Add this to all ports that depend on it
so their executables load the right libstdc++.so on FreeBSD 9.
PR: 205120
Exp-run by: antoine
Approved by: portmgr (antoine)
|
|
Sat, 9 Jul 2016
|
[ 11:37 pi ]
chinese/fcitx: 4.2.8.6 -> 4.2.9.1
PR: 210782
Submitted by: Iblis Lin <iblis@hs.ntnu.edu.tw>
Approved by: lichray@gmail.com (maintainer)
|
|
Wed, 6 Jul 2016
|
[ 22:10 mat ] (Only the first 10 of 74 ports in this commit are shown above. )
Bump PORTREVISION for the icu revert.
This time not bumping lang/php70, but devel/php70-intl which is the one
really depending on icu.
PR: 205120
With hat: portmgr
Sponsored by: Absolight
|
[ 07:34 gahr ] (Only the first 10 of 64 ports in this commit are shown above. )
devel/icu: bump PORTREVISION on dependent ports
|
|
Fri, 1 Apr 2016
|
[ 13:29 mat ] (Only the first 10 of 1009 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.
With hat: portmgr
Sponsored by: Absolight
|
|
Thu, 7 Jan 2016
|
[ 14:54 jhale ] (Only the first 10 of 12 ports in this commit are shown above. )
Add USES=pathfix support for CMake. Some ports that use CMake to build
already had USES=pathfix, although it did nothing. For those ports, I
either removed it as they were handling the pkgconfig files differently
or I removed patches and substitutions that accomplished the same thing
as pathfix.
Differential Revision: https://reviews.freebsd.org/D850
Reviewed by: antoine, bapt, tijl
Approved by: portmgr (bapt)
|
|
Thu, 3 Sep 2015
|
[ 15:44 rakuco ] (Only the first 10 of 18 ports in this commit are shown above. )
Uses/iconv.mk: Set iconv-related CMake variables.
The way we deal with iconv in base and ports across different FreeBSD
releases is complicated: 9.x does not have iconv.h in base, 10.1 has it with
a different prototype for iconv(3) and later versions have the right
iconv(3) prototype. And, in some cases (USES=iconv:{translit,wchar_t}), we
must always use the libiconv port.
This is why there are so many checks in Uses/iconv.mk: we need to know the
situation we currently have in order to decide whether to pull iconv from
converters/libiconv, whether to just use its header (and pull the library
from base) or whether to use everything from base.
r384038 adjusted several CMake-based ports, but did so in a way that was not
very scalable and required a few intrusive patches to some ports. Most ports(Only the first 15 lines of the commit message are shown above )
|
|
Thu, 23 Apr 2015
|
[ 21:26 bapt ] (Only the first 10 of 57 ports in this commit are shown above. )
Update icu to 55.1
|
|
Fri, 3 Apr 2015
|
[ 20:56 delphij ]
Fix build when building in an environment with old version of fcitx
present.
PR: ports/199112
Submitted by: maintainer
|
[ 11:26 mat ] (Only the first 10 of 120 ports in this commit are shown above. )
Remove OSVERSION checks that do not make sense any more.
For example (${OSVERSION} >= 900000 && ${OSVERSION} < 900021) is always true,
as is (${OSVERSION} > 900002 || ${OSVERSION} < 900000 && ${OSVERSION} > 800107).
Regarding patches, when an EXTRA_PATCHES is no longer needed, I remove it, when
it is always needed, I renamed it, in one case, I merged two patches.
Differential Revision: https://reviews.freebsd.org/D2209
|
|
Thu, 2 Apr 2015
|
[ 10:12 robak ]
chinese/fcitx: update 4.2.8.5 -> 4.2.8.6
PR: 199102
Submitted by: Zhihao Yuan <lichray@gmail.com>
|
|
Tue, 31 Mar 2015
|
[ 07:08 delphij ] (Only the first 10 of 113 ports in this commit are shown above. )
Major update to libpinyin, fcitx and their add ons:
- New port: chinese/brise Rime schema repository
- Update chinese/fcitx to 4.2.8.5.
- Update chinese/fcitx-chewing to 0.2.2.
- Update chinese/fcitx-cloudpinyin to 0.3.4.
- Update chinese/fcitx-configtool to 0.4.8.
- Update chinese/fcitx-libpinyin to 0.3.1.
- Update chinese/fcitx-rime to 0.3.1.
- Update chinese/fcitx-sunpinyin to 0.4.1.
- Update chinese/fcitx-table-extra to 0.3.7.
- Add LICENSE and update website (mainly move off Google Code)
for various ports.
- Update chinese/libpinyin to 1.1.0.
- Update chinese/librime to 1.1.
- Update chinese/opencc to 0.4.3.
- Update japanese/fcitx-anthy to 0.2.1.
- New port: japanese/fcitx-skk SKK support for Fcitx
- Update korean/fcitx-hangul to 0.3.0.
- Update textproc/fcitx-m17n to 0.2.3.
PR: ports/198743
Submitted by: maintainer, hiroto.kagotani@gmail.com, delphij
|
|
Tue, 9 Sep 2014
|
[ 08:49 marino ]
chinese/fcitx: Adjust pkg-plist to pass stage-qa checks
PR: 192901
|
|
Tue, 15 Jul 2014
|
[ 23:11 adamw ] (Only the first 10 of 115 ports in this commit are shown above. )
Add OPTIONS_DEFINE=DOCS for ports with %%PORTDOCS%% in the plist.
Where possible, correct a few instances where PORTDOCS was being used
to flag stuff in EXAMPLESDIR. For some ports, mostly those owned by
ruby@, PORTDOCS is applied to pretty much everything whether it's
documentation or example.
|
|
Mon, 9 Jun 2014
|
[ 11:21 olgeni ] (Only the first 10 of 120 ports in this commit are shown above. )
Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. Categories A-C.
CR: D196
Approved by: portmgr (bapt)
|
|
Sun, 1 Jun 2014
|
[ 16:43 ohauer ] (Only the first 10 of 17 ports in this commit are shown above. )
- USE_(BZIP2|XZ) -> USES=tar:(bzip2|xz)
|
|
Wed, 16 Apr 2014
|
[ 18:28 zeising ] (Only the first 10 of 1008 ports in this commit are shown above. )
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 7 Feb 2014
|
[ 11:44 bapt ] (Only the first 10 of 229 ports in this commit are shown above. )
Chase boost and icu bump
While here convert some LIB_DEPENDS
|
|
Sat, 4 Jan 2014
|
[ 23:27 antoine ] (Only the first 10 of 16 ports in this commit are shown above. )
With gtk 2.4.22, immodule cache has moved from gtk.immodules to
immodules.cache. gtk-query-immodules-2.0 has a new option,
--update-cache that does what we want too.
Use this new option.
While here, add stage support to non slave ports
Reviewed by: kwm (immodules part)
|
|
Fri, 3 Jan 2014
|
[ 15:59 adamw ] (Only the first 10 of 12 ports in this commit are shown above. )
Convert chinese to MDOCS
|
|
Wed, 11 Dec 2013
|
[ 14:58 bapt ] (Only the first 10 of 21 ports in this commit are shown above. )
In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in chinese
|
|
Fri, 27 Sep 2013
|
[ 22:32 madpilot ]
Fix typo.
Reported by: Buganini <buganini@gmail.com> (via email)
|
[ 15:17 madpilot ]
Import a bunch of iconv fixes.
Submitted by: marino
Approved by: portmgr (bapt, implicit)
|
|
Fri, 20 Sep 2013
|
[ 16:01 bapt ] (Only the first 10 of 138 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
chinese)
|
|
Tue, 3 Sep 2013
|
[ 17:12 antoine ]
Add an explicit dependency on pkgconf
Approved by: portmgr (bapt)
|
|
Wed, 31 Jul 2013
|
[ 11:57 kwm ] (Only the first 10 of 149 ports in this commit are shown above. )
The FreeBSD GNOME team presents a Glib and Gtk+ 3 update.
This update updates Glib20 to 2.36 and Gtk+ 3.8
* The gio-fam-backend port that used gamin for the GFileMonitor API is gone.
It is replaced by a GIO kqueue implementation developed as part of a NetBSD
GSoC 2011 project by Dimitry Matveev.
* Fix a bug in the glib20 Makefile so it includes -lintl in the glib-2.0
pkgconfig file [1]. This broke static linking and newer binutils.
* Add introspection USE_GNOME component which sets GI_SCANNER_DISABLE_CACHE to
prevent creation of / root/.cache dir. Defaults to build & run depend,
but :build and :run switches available.
* New x11-toolkits/pangox-compat port and companion USE_GNOME component for
pangox support which was removed from the pango port. Add it to ports still
using pangox API.
Exp-run by: bapt@
PR: ports/178958 [1]
Submitted by: emaste@ [1]
|
|
Mon, 17 Jun 2013
|
[ 16:18 antoine ] (Only the first 10 of 15 ports in this commit are shown above. )
- Add gtk-query-immodules to _FORCE_POST_PATTERNS to run it post-deinstall
with pkg
- Consistently use full path when running gtk-query-immodules as the path
is embedded in output (we prefer reproducible output)
This fixes leftovers reported by poudriere
====>> Files or directories modified:
etc/gtk-2.0/gtk.immodules
PR: ports/179230
Approved by: portmgr (bapt)
|
|
Fri, 26 Apr 2013
|
[ 10:44 ak ] (Only the first 10 of 277 ports in this commit are shown above. )
- Convert USE_GETTEXT to USES (part 4)
Approved by: portmgr (bapt)
|
|
Fri, 22 Mar 2013
|
[ 20:06 makc ] (Only the first 10 of 464 ports in this commit are shown above. )
- convert USE_CMAKE to USES
- while here clean up some ports from CMAKE_VERBOSE, which is intended
for users
Approved by: portmgr (miwi)
|
|
Tue, 18 Dec 2012
|
[ 23:09 bapt ] (Only the first 10 of 34 ports in this commit are shown above. )
Chase icu, graphite2 and libexttextcat bump
|
|
Sun, 25 Nov 2012
|
[ 13:25 wen ]
- Fix build when QT4 option enable
PR: 173887
Submitted by: Hon-Yu Lawrence Cheung <cheunghonyu@gmail.com>
Approved by: lichray@gmail.com (maintainer, via email)
Feature safe: yes
|
|
Mon, 15 Oct 2012
|
[ 19:13 delphij ]
Update fcitx to newer versions:
fcitx 4.2.6 -> 4.2.6.1
fcitx-configtool 4.2.5 -> 4.2.5.1
fcitx-libpinyin 0.2.0 -> 0.2.1
fcitx-googlepinyin 0.1.5 -> 0.1.6
Submitted by: maintainer
PR: ports/172727, ports/172093
Feature safe: yes
|
|
Wed, 19 Sep 2012
|
[ 07:01 wen ] (Only the first 10 of 12 ports in this commit are shown above. )
- Update to 4.2.6
PR: 171608
Submitted by: Zhihao Yuan <lichray@gmail.com> (maintainer)
|
|
Wed, 25 Jul 2012
|
[ 18:10 scheidell ] (Only the first 10 of 24 ports in this commit are shown above. )
- Update fcitx and addons to 4.2.5
- Remove textproc/fcitx-keyboard
PR: ports/170010
Submitted by: Zhihao Yuan <lichray@gmail.com> (maintainer)
|
|
Sun, 10 Jun 2012
|
[ 13:00 scheidell ]
- Upstream patch to fix libkvm fd leaking
- Bump PORTREVISION
PR: ports/168907
Submitted by: Zhihao Yuan <lichray@gmail.com> (maintainer)
Obtained from: http://paste.opensuse.org/23129601
|
|
Wed, 6 Jun 2012
|
[ 06:44 miwi ] (Only the first 10 of 587 ports in this commit are shown above. )
- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4
Review by: bapt, David Naylor (kde team)
|
|
Sun, 3 Jun 2012
|
[ 22:37 bapt ]
1. Convert to the new options style;
2. Fix pkg-plist for gtk2/gtk3/qt4 IM modules;
3. Update gtk immodules file(s);
4. Smart pkg-message.in;
5. Align some Makefile variables.
PR: ports/168634
Submitted by: Zhihao Yuan <lichray@gmail.com>
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Fri, 25 May 2012
|
[ 07:28 wen ]
- Update to 4.2.3
PR: 167863
Submitted by: Zhihao Yuan <lichray@gmail.com> (maintainer)
|
|
Mon, 30 Apr 2012
|
[ 22:57 scheidell ] (Only the first 10 of 21 ports in this commit are shown above. )
- Update chinese/fcitx-googlepinyin to 0.1.4
- Update chinese/fcitx-configtool to 0.4.0
- Update chinese/fcitx-cloudpinyin to 0.2.0
- Update chinese/fcitx-sunpinyin to 0.3.3
- Update chinese/fcitx to 4.2.2
- Update textproc/fcitx-keyboard to 0.1.0
PR: ports/166689
Submitted by: Zhihao Yuan <lichray@gmail.com> (maintainer)
|
|
Tue, 7 Feb 2012
|
[ 20:57 delphij ] (Only the first 10 of 30 ports in this commit are shown above. )
Update fcitx and friends:
- fcitx to 4.2.0, always depend on dbus
- fcitx-cloudpinyin to 0.2.0
- fcitx-configtool to 0.4.0
- fcitx-googlepinyin to 0.1.4
- fcitx-sunpinyin to 0.3.3
- fcitx-ui-light to 0.1.3
- libgooglepinyin to 0.1.2
PR: ports/164820
Submitted by: maintainer (Zhihao Yuan <lichray gmail com>
|
|
Fri, 11 Nov 2011
|
[ 06:36 clsung ]
- pass maintainership (forgot do it in last commit)
PR: ports/162423
Feature safe: yes
|
[ 05:18 clsung ] (Only the first 10 of 20 ports in this commit are shown above. )
- Update to 4.1.2
- Fcitx's development has been totally moved to http://code.google.com/p/fcitx/
, and the new 4.1.x version is moved to CMake.
- pass maintainership
PR: ports/162423
Submitted by: Zhihao Yuan <lichray_AT_gmail.com> (new maintainer)
Approved by: maintainer (Denise H. G.)
Feature safe: yes
|
|
Tue, 7 Jun 2011
|
[ 00:25 danfe ]
- Unbreak on 7.X by replacing getline() GNU extension with fgets()
- Replace ${DISTDIR}/${DIST_SUBDIR} with ${_DISTDIR} shortcut
- Cleanup logging-related stuff since this option was dropped upstream
- Turn explicit dependency on libXft into USE_XORG+=xft
- Use gnomehack and drop two corresponding patches
- Sort knobs and fix some whitespace
Approved by: maintainer
|
|
Thu, 3 Feb 2011
|
[ 17:59 pav ]
- Mark BROKEN on 7.X
Reported by: pointyhat
Feature safe: yes
|
|
Mon, 29 Nov 2010
|
[ 18:39 pav ] (Only the first 10 of 11 ports in this commit are shown above. )
- Update to 4.0.0
PR: ports/152615
Submitted by: Denise H. G. <darcsis@gmail.com> (maintainer)
|
|
Tue, 3 Aug 2010
|
[ 02:11 danfe ]
Use better spelling (I copied original one from the English page of the
website, but main (Chinese) page spells it correctly).
|
[ 01:41 danfe ]
- Update to version 3.6.3
- Remove obsolete master sites
- Add LICENSE
- Utilize OPTIONS
- Correctly track dependencies (prevent silent dependency injection)
- Minor Makefile cleanups
Approved by: maintainer timeout
|
|
Sun, 18 Oct 2009
|
[ 06:41 lwhsu ]
- Update to 3.6.2
- Pass maintainership to submitter
PR: ports/139692
Submitted by: "Denise H. G." <darcsis@gmail.com>
|
|
Thu, 18 Dec 2008
|
[ 02:24 linimon ] (Only the first 10 of 31 ports in this commit are shown above. )
Reassign ports maintained by dryice@ for now due to other commitments.
Hat: portmgr
|
|
Sun, 23 Mar 2008
|
[ 16:44 miwi ] (Only the first 10 of 104 ports in this commit are shown above. )
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION
Approved by: portmgr (xorg cleanup)
|
|
Tue, 25 Dec 2007
|
[ 09:14 dryice ]
update to 3.5, the BlackFriday version
PR: ports/118508
Submitted by: Sutra <zhoushuqun@gmail.com>
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Thu, 18 Jan 2007
|
[ 02:10 dryice ]
- update to 3.4.2
- add MASTER_SITE_LOCAL
- update my mail address
Approved by: itetcu (mentor)
|
|
Sun, 5 Nov 2006
|
[ 10:10 rafan ]
- Update to 3.4.1
PR: ports/105123
Submitted by: Dryice Liu (maintainer)
|
|
Sun, 8 Oct 2006
|
[ 00:28 rafan ]
- Update to 3.4
PR: ports/104098
Submitted by: Dryice Liu <dryice at dryice.name> (maintainer)
|
|
Sun, 3 Sep 2006
|
[ 00:11 rafan ]
- Update to 3.3.1
PR: ports/102785
Submitted by: Dryice Liu <dryice at dryice.name> (maintainer)
|
|
Wed, 23 Aug 2006
|
[ 06:39 clsung ]
- Update to 3.3
PR: ports/102420
Submitted by: maintainer (Dryice Liu)
|
|
Wed, 28 Jun 2006
|
[ 05:32 clsung ]
- update to 3.2.1
PR: ports/99574
Submitted by: maintainer (Dryice Liu)
|
|
Thu, 15 Jun 2006
|
[ 09:51 vanilla ]
Upgrade to 3.2
PR: ports/98921
Submitted by: maintainer
|
|
Wed, 3 May 2006
|
[ 23:38 edwin ] (Only the first 10 of 88 ports in this commit are shown above. )
remove USE_REINPLACE for all ports with categories starting with C
|
|
Wed, 15 Mar 2006
|
[ 18:21 garga ] (Only the first 10 of 27 ports in this commit are shown above. )
- Fix MASTER_SITES
bsdchat.com is no longer available. Thanks for all their support!
PR: ports/94459
Submitted by: Dryice Liu <dryice@dryice.name> (maintainer)
|
|
Wed, 11 Jan 2006
|
[ 04:01 edwin ] (Only the first 10 of 29 ports in this commit are shown above. )
[maintainer] change maintainer mail address
I'm the maintainer(dryice@liu.com.cn) of the following
ports. Please help to change the maintainer mail address to
dryice@dryice.name. This new mail address has a RDNS record
and will make the life easier. Thanks!
PR: ports/91624
Submitted by: Dryice Dong Liu <dryice@dryice.name>
|
|
Wed, 6 Apr 2005
|
[ 04:23 clsung ]
- update to 3.1.1
PR: 79581
Submitted by: Dryice Liu (maintainer)
|
|
Wed, 2 Mar 2005
|
[ 03:21 clsung ]
- update to 3.1
- new file: files/patch-xpm-Makefile.in
PR: ports/78267
Submitted by: Dryice Liu (maintainer)
|
|
Mon, 3 Jan 2005
|
[ 10:20 erwin ]
Add mirror site to make fetcheable and unbreak
PR: 75741
Submitted by: maintainer
Approved by: portmgr (krion)
|
|
Sun, 2 Jan 2005
|
[ 01:25 kris ]
BROKEN: Unfetchable
Approved by: portmgr (self)
|
|
Wed, 15 Dec 2004
|
[ 06:30 clive ]
Update to 3.0.3
PR: ports/75089
Submitted by: MAINTAINER
|
|
Wed, 27 Oct 2004
|
[ 15:25 vanilla ] (Only the first 10 of 15 ports in this commit are shown above. )
Upgrade to 3.0.2.
PR: ports/73185
Submitted by: maintainer
Some part by: me
|
|
Fri, 15 Oct 2004
|
[ 08:08 clive ]
Apply 64 bits cleanup so that it works on fantastic hardware.
PR: ports/72371
Submitted by: davidxu
Approved by: MAINTAINER
|
|
Tue, 16 Mar 2004
|
[ 22:54 marcus ] (Only the first 10 of 28 ports in this commit are shown above. )
Chase the new location of libXft.
|
|
Mon, 16 Feb 2004
|
[ 18:35 vanilla ]
- change locale from zh_CN.EUC to zh_CN.eucCN for FreeBSD 5.2 and above
- adding document
- use SIZE in distinfo file
- utilize USE_ICONV
- add an option to change the hot key
- bump PORTREVERSION
PR: ports/62596
Submitted by: maintainer
|
Number of commits found: 109 (showing only 100 on this page) |
As an Amazon Associate I earn from qualifying purchases.