| non port: chinese/enscript/Makefile |
|
SVNWeb
|
Number of commits found: 28 |
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner)  ]    25fe59a (Only the first 10 of 124 ports in this commit are shown above.  )
chinese: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <intron@intron.ac>
* Bo-Yi Wu <appleboy.tw@gmail.com>
* Chih-Hsin Chang <chihhsin@cs.nctu.edu.tw>
* Ching-Hong Wu <woju@freebsd.ntu.edu.tw>
* David O'Brien (obrien@FreeBSD.org)
* David O'Brien (obrien@cs.ucdavis.edu)
* Eric L. Camachat <eric@camachat.org>
* Foxfair Hu <foxfair@FreeBSD.org>
* G. Adam Stanislav <adam@whizkidtech.net>
* Gasol Wu <gasol.wu@gmail.com>
* Gea-Suan Lin <gslin@gslin.org> (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 29 Jun 2022
|
[ 15:00 Stefan Eßer (se) ] 15c825b
Fix CONFLICTS_INSTALL in categories cad and chinese
Approved by: portmgr (implicit)
|
|
Sun, 6 Feb 2022
|
[ 18:36 Stefan Eßer (se) ] bdd2d4a (Only the first 10 of 69 ports in this commit are shown above. )
Update CONFLICTS definitions in categories a* to c*
Update the CONFLICTS definitions of ports in the following categories:
- accessibility
- archivers
- audio
- benchmarks
- biology
- cad
- chinese
- comms
- converters
An attempt has been made to use generic conflicts patterns that do not
have to be updated whenever a new version of a conflicting port is
added to the ports system.
There is a misunderstanding that the port being built/installed has to
be omitted from the conflicts pattern. This is not true - the port
being built is implicitly non-conflicting due to logic in bsd.port.mk.
Approved by: portmgr (implicit)
|
|
Mon, 10 Jan 2022
|
[ 15:15 Stefan Eßer (se) ] bcaf25a (Only the first 10 of 491 ports in this commit are shown above. )
Fix CONFLICTS entries of multiple ports
There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.
This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.
Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sat, 10 Nov 2018
|
[ 18:12 bapt ]   (Only the first 10 of 386 ports in this commit are shown above. )
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
|
|
Fri, 1 Apr 2016
|
[ 13:29 mat ] (Only the first 10 of 1009 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.
With hat: portmgr
Sponsored by: Absolight
|
|
Thu, 24 Mar 2016
|
[ 15:47 tijl ] (Only the first 10 of 95 ports in this commit are shown above. )
Make print/ghostscript9-agpl-base the default Ghostscript port. Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.
Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.
Fix print/ghostscript9-agpl-base to install eps2write.
Update math/asymptote to 2.37 to support newer Ghostscript.
PR: 208159
Exp-run by: antoine
Approved by: portmgr (antoine)
|
|
Thu, 16 Jul 2015
|
[ 20:53 kwm ] (Only the first 10 of 89 ports in this commit are shown above. )
Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.
Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl
PR: 201201 (exp-run)
Approved by: portmgr (mat@)
Exp run by: antione@ (previous patch)
Differential Revision: https://reviews.freebsd.org/D2938
|
|
Wed, 27 May 2015
|
[ 00:15 amdmi3 ] (Only the first 10 of 26 ports in this commit are shown above. )
- Don't cat pkg-message from Makefiles
Approved by: portmgr blanket
|
|
Fri, 16 Jan 2015
|
[ 17:28 rafan ] (Only the first 10 of 46 ports in this commit are shown above. )
Drop maintainership as I no longer use these software nor have time and
energy to keep up.
|
|
Fri, 30 May 2014
|
[ 13:53 rafan ]
Staging support
|
|
Fri, 20 Sep 2013
|
[ 16:01 bapt ] (Only the first 10 of 138 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
chinese)
|
|
Mon, 24 Sep 2007
|
[ 08:39 rafan ] (Only the first 10 of 20 ports in this commit are shown above. )
Remove print/ghostscript-afpl as it has been replaced by print/ghostscript-gpl
since version 8.57. The leading ghostscript is the -gpl one.
Approved by: portmgr (pav)
|
|
Tue, 27 Jun 2006
|
[ 03:58 rafan ] (Only the first 10 of 37 ports in this commit are shown above. )
Change to my FreeBSD.org email.
Approved by: delphij (mentor)
|
|
Mon, 14 Feb 2005
|
[ 14:51 naddy ]
Don't duplicate bsd.port.mk.
PR: 77492
Submitted by: Rong-En Fan <rafan@infor.org>
|
[ 13:04 naddy ]
Fix slave port: don't use gmake.
Submitted by: kris (pointyhat)
|
|
Thu, 13 May 2004
|
[ 17:01 vanilla ]
Unbroken it, and assign MAINTAINER to submitter.
PR: ports/66595
Submitted by: Rong-En Fan <rafan_at_infor.org>
No Responsed: keith@
|
|
Mon, 19 Apr 2004
|
[ 07:48 kris ] (Only the first 10 of 26 ports in this commit are shown above. )
These broken ports are scheduled for deletion on June 18 if they are
still broken at that time and no PRs have been submitted containing a fix.
|
|
Sat, 3 Apr 2004
|
[ 14:11 kris ]
BROKEN: Fails to patch
|
|
Tue, 20 Jan 2004
|
[ 16:30 marcus ] (Only the first 10 of 35 ports in this commit are shown above. )
Use the new ghostscript options.
Submitted by: linimon
|
|
Tue, 13 Jan 2004
|
[ 06:46 linimon ]
Back out revision 1.6 which was committed by mistake; the change in
it was picked up by a spurious commit of mine to chinese/*/Makefile.
Sorry about that. If anyone has had ghostscript dependency problems
while trying to install this port, please try it again now.
|
|
Fri, 21 Nov 2003
|
[ 03:09 linimon ] (Only the first 10 of 47 ports in this commit are shown above. )
statue@freebsd.sinica.edu.tw has asked for all the maintained
ports to be reset to ports@FreeBSD.org. We're sorry to see you
go and want to thank you for your help in the past.
PR: ports/59515
Submitted by: statue@freebsd.sinica.edu.tw
|
|
Sun, 31 Aug 2003
|
[ 00:22 edwin ]
[PATCH] chinese/enscript: enable choose of ghostscript interpreter
This patch allows the admin of the machine to choose either
print/ghostscript-gnu or print/ghostscript-afp1
PR: ports/54920
Submitted by: Jens Rehsack <rehsack@liwing.de>
|
|
Fri, 9 Aug 2002
|
[ 16:47 ade ]
Reroute dependency on defunct chinese/ghostscript6 port and
redirect to print/ghostscript-gnu (see ports/39684)
Submitted by: 'make index' failing for a while
|
|
Tue, 29 Jan 2002
|
[ 09:39 knu ]
Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command; the ECHO
macro is set to "echo" by default, but it is set to "true" if make(1) is
invoked with the -s option while ECHO_CMD is always set to the echo command.
|
|
Tue, 22 May 2001
|
[ 19:19 sobomax ] (Only the first 10 of 20 ports in this commit are shown above. )
Ports policy:
|
|
Mon, 27 Nov 2000
|
[ 18:00 keith ]
Initial version.
|
Number of commits found: 28 |
As an Amazon Associate I earn from qualifying purchases.